22 March 2021 in IEEE Microwave and Wireless Components Letters
A compact multifunctional switchable filter based on parallel-coupled lines with three different filtering functions is presented in this letter. By using p-i-n switches to connect or disconnect microstrip line and shorted coupled lines, three different modes, i.e., wideband bandpass filter (BPF), bandstop filter (BSF), and dual-band BPF, can be realized. For demonstration, the switchable filter prototype is designed and fabricated. For the wideband BPF mode, the measured 3-dB fractional bandwidth is about 53.1% (1.41-2.43 GHz) with the measured insertion loss of 0.9 dB. For the BSF mode, the measured 10-dB fractional bandwidth is about 30.2% (1.63-2.21 GHz) with in-band suppression level of over 15.5 dB. For the dual-band BPF mode, the measured 3-dB bandwidths of the two passbands are around 3.8% and 2.7%, respectively.
8 February 2024 in ACS Applied Materials & Interfaces
31 January 2023 in IEEE Antennas and Wireless Propagation Letters
In this letter, a compact dual-band MIMO antenna, consisting of four antenna pairs, is presented for 5G mobile terminal applications. Each pair includes two tightly-arranged monopoles. By folding the L-shaped monopoles into U-shaped structures, both the 3.5 GHz band and 4.9 GHz band can share the same decoupling inductor. By adding stop-band filter on the monopole, dual-band operation can be provided by a single branch. The size of the dual-band antenna pair is merely 19×4 mm 2 . The measured -6 dB bandwidth can cover 3.4-3.6 GHz and 4.8-5.0 GHz, with port isolation higher than 12 dB. The measured radiation efficiency varies from 41% to 59% in the lower band, and varies from 38% to 62% in the upper band.
31 October 2022 in IEEE Antennas and Wireless Propagation Letters
A single-layer filtering hybrid antenna with low- profile and high-selectivity is presented. The proposed antenna is composed of a triangular patch and a substrate integrated waveguide (SIW) cavity with triangular slot and U-shaped slot etched on the top surface. The patch is embedded in the triangular slot. Four modes can be generated by the hybrid structure. That is, the TM 10 mode of the patch, the right half-TE 11 , the modified right half-TE 11 and the TE 1.5, 1 modes of the SIW cavity are selected. By merging the four modes into a single passband, the impedance bandwidth is broadened, and the frequency selectivity is enhanced. There are two radiation nulls at the lower and upper edges of the passband, which can be controlled independently. In addition, part of the shorting pins surrounding the SIW cavity is truncated to decrease the operating frequency and increase the out-of-band rejection. The measured -10dB impedance bandwidth ranges from 3.44 to 3.62 GHz with sharp frequency selectivity and more than 18 dB out-of-band suppression level.
15 January 2020 in IEEE Access