Thermogravimetric analysis (TGA) was performed on six samples of pine wood, poplar sawdust and olive residue, and the kinetic parameters were evaluated by using isoconversional models. The hemicellulose, cellulose and lignin contents were also estimated using the Fraser–Suzuki deconvolution method. In addition, a range of thermodynamic parameters and combustion indices was calculated. Significant correlations were found between the kinetic, thermodynamic and combustion parameters. The ignition index showed an inverse relationship with the activation energy, whereas the burnout index correlated with enthalpy values for most samples. Higher heating rates during TGA increased ignition and combustion efficiencies but decreased combustion stability. Differences in behaviour were detected between the olive residues, which had a much higher lignin content (51.2–56.9%), and the woody biomass samples (24.2–29.2%). Moreover, the sample with the highest ash content also exhibited some distinctive characteristics, including the lowest high heating value and ignition index, coupled with the highest activation energy, indicating a less favourable combustion behaviour than the other samples. The particle size of the samples was also found to be critical for both combustion efficiency and safety.

Biogas is a renewable gas with low heat energy, which makes it extremely difficult to use as fuel in conventional natural gas equipment. Nonetheless, the use of hydrogen as a biogas additive has proven to have a beneficial effect on flame stability and combustion behavior. This study evaluates the biogas–hydrogen combustion in a conventional natural gas burner able to work up to 100 kW. Tests were performed for three different compositions of biogas: BG70 (30% CO₂), BG60 (40% CO₂), and BG50 (50% CO₂). To achieve better flame stability, each biogas was enriched with hydrogen from 5% to 25%. The difficulty of burning biogas in conventional systems was proven, as the burner does not ignite when the biogas composition contains more than 40% of CO₂. The best improvements were obtained at 5% hydrogen composition since the exhaust gas temperature and, thus, the enthalpy, rises by 80% for BG70 and 65% for BG60. The stability map reveals that pure biogas combustion is unstable in BG70 and BG60; when the CO₂ content is 50%, ignition is inhibited. The properties change slightly when the hydrogen concentrations are more than 20% in the fuel gas and do not necessarily improve.