Regional- and national-scale landslide warning systems are usually based on rainfall thresholds that forecast the possibility of landslide occurrence over wide spatial units called alert zones (AZs). This work proposes a substantial improvement of the state-of-the-art by combining the rainfall threshold outcomes with a set of spatially explicit risk indicators aggregated at the municipality level. The combination of these two different techniques is performed by means of a dynamic matrix, which was purposely calibrated to provide an output in the form of five possible levels of risk (from R0 to R4), which are connected to the growing intensity of expected impacts and a pre-defined confidence in issuing warnings without omitting alarms. Italy (about 300,000 km2) is used as a case study, producing a set of rainfall thresholds differentiated for 150 AZs and providing a specific calibration of the dynamic risk matrix for each of them. The verification of the matrix outputs was satisfactory as no AZs experienced landslides at the R0 level; only two of them had more than 10% of landslides at the R1 level, and most of the AZs had more than 90% of the landslides in the R2 to R4 risk classes. A comparison with a nation-wide dataset of very severe hydrogeological disasters further corroborated the consistency of the model outputs with real scenarios, as most part of the impacts occurred in places and times when the matrix outputs were at the highest levels. The proposed methodology represents a reliable improvement for state-of-the-art territorial warning systems, as it brings two main advances: the spatial resolution is greatly improved, as the basic spatial unit for warning is downscaled from AZs to municipalities (whose average extension, in Italy, is about 1770 and 38 km2, respectively); second, the outputs can better address the needs of landslide emergency management, as the warning are specifically addressed to small areas based on the expected impacts (since risk indicators are used in the dynamic matrices), rather than on the mere probability of landslide occurrence.
The continuous monitoring of displacements occurring on the Earth surface by exploiting MTInSAR (Multi Temporal Interferometry SAR) Sentinel-1 data is a solid reality, as testified by the ongoing operational ground motion service in the Tuscany region (Central Italy). In this framework, anomalies of movement, i.e., accelerations or deceleration as seen by the time series of displacement of radar targets, are identified. In this work, a Machine Learning algorithm such as the Random Forest has been used to assess the probability of occurrence of the anomalies induced by slope instability and subsidence. About 20,000 anomalies (about 7000 and 13,000 for the slope instability and the subsidence, respectively) were collected between 2018 and 2020 and were used as input, while ten different variables were selected, five related to the morphological and geological setting of the study area and five to the radar characteristics of the data. The resulting maps may provide useful indications of where a sudden change of displacement trend may occur, analyzing the contribution of each factor. The cross-validation with the anomalies collected in a following timespan (2020–2021) and with official landslide and subsidence inventories provided by the regional authority has confirmed the reliability of the final maps. The adoption of a map for assessing the probability of the occurrence of MTInSAR anomalies may serve as an enhanced geohazard prevention measurement, to be periodically updated and refined in order to have the most precise knowledge possible of the territory.
Velocity is one of the most important parameters to evaluate the damaging potential of a mass movement, but its assessment, especially for extremely rapid landslides, is a complex task. In the literature, several models to assess mass movement velocity exist, but they usually require many detailed parameters, and therefore, they are applicable only to a single slope and not usable for regional-scale analyses. This study aims to propose a simple morphometric methodology, based on the spatialisation of the Energy Line method, to determine the velocity of shallow landslides and rockfalls at a regional scale. The proposed method requires a limited amount of input data (landslide perimeters and a digital elevation model), and its application can be carried out using GIS software and a Matlab code. The test area of this work is the Valle d’Aosta Region (Northern Italy), selected due to its peculiar geological and geomorphological setting that makes this region susceptible to the occurrence of both shallow landslides and rockfalls. Since measured velocity values for rockfalls and shallow landslides were not available, the results obtained with the proposed method have been validated through the implementation of a model in the literature, namely the Gravitational Process Path (GPP) model, for some selected landslides.
Spaceborne-based monitoring for environmental purposes has become a well-established practice. The recent progress of synthetic aperture radar (SAR) sensors, including through the European Space Agency’s (ESA) Sentinel-1 constellation, has enabled the scientific community to identify and monitor several geohazards, including subsidence ground deformations. A case study in the Tuscany Region, Italy, highlights the effectiveness of interferometric synthetic aperture radar (InSAR) in detecting abrupt increases in ground deformation rates in an industrial area of Montemurlo municipality. In this case, InSAR data enabled prompt identification of the phenomenon, supporting the authorities in charge of environmental management to thoroughly investigate the situation. First, an on-site validation was performed via field surveys confirming the presence of cracks and fissures on some edifices. Further analysis, including water pumping rates, settlement gauge and topographic levelling, corroborated the InSAR data's findings regarding vertical deformation. Integration of collected data allowed for spatial identification and assessment of the subsidence bowl and its source depth recognized by the remote sensing data. The Montemurlo case offers a procedural guideline for managing abrupt accelerations, identified by InSAR data in subsidence-prone areas due to fluid overexploitation. In fact, these data proved useful in helping local authorities responsible for hydrogeomorphological risk management. With the exacerbation of deformation issues in subsidence-prone regions due to climate change, early detection and monitoring of such phenomena are increasingly crucial, with InSAR data playing a central role in achieving this goal.
The European Ground Motion Service (EGMS), part of the Copernicus Land Monitoring Service (CLMS), provides free pan-European ground motion data to support local and regional ground deformation analyses. To enhance the accessibility and usability of EGMS products, a new webapp, EGMStream, has been developed using Python and JavaScript for downloading and converting EGMS data. This revised and updated version improves the functionality and performance of the original R-based desktop tool, avoiding the need for a standalone software installation. Users can now simply access the webapp with an internet connection. In addition, the web version enhances data processing by leveraging high-performance server-side computing without relying on personal computer resources. The EGMStream webapp offers advanced features, including the parallel processing of large datasets and extraction of converted EGMS data for areas of interest (AoI) in various GIS-compatible formats. The transition from standalone software to a cloud-based system streamlines the integration of EGMS data into existing workflows, broadens user accessibility, and supports large-scale geospatial analysis. Consequently, this shift promotes the dissemination of these relevant and free available measurement data to a wider audience, including non-expert users.
21 June 2026 in Earth Surface Processes and Landforms
Peatlands are natural terrestrial carbon stores that play a key role in climate change mitigation. Accurate mapping of these ecosystems remains challenging due to their complex surface characteristics and the limitations of traditional optical‐based methods. This paper presents a method for the detection of peatland‐like displacement dynamics using open‐source advanced differential interferometric synthetic aperture radar data from the European Ground Motion Service. Vertical displacement time series are analysed using a two‐step unsupervised framework that integrates principal component analysis and k ‐means clustering in Great Britain to identify areas exhibiting peat‐like displacement behaviour. This provides a process‐based complement to traditional optical peatland mapping approaches. The results reveal distinct subsidence trends and seasonal deformation patterns typical of peat soils, even in regions not classified as peatlands in existing land cover databases. Cross‐correlation analysis with climatic variables further highlights the sensitivity of peatlands to moisture and temperature variations. Three case studies are shown to validate the approach and demonstrate its potential for refining peatland inventories: (i) Hatfield Moors, (ii) New Forest and (iii) an area north of Tilshead not classified as peatland in the land cover database. The proposed solution exploits the potential of Sentinel‐1 data to enhance peatland identification, characterise their response to environmental parameters and support the updating of existing land cover maps. A more precise identification of peatland ecosystems is relevant for climate change analysis and resilience. This methodology provides a robust, cost‐effective tool for identifying peat‐like behaviour areas and for significantly enhancing conservation and restoration efforts.