Microbially induced calcite precipitation (MICP) through a ureolytic pathway is a process that promotes calcite precipitation as a result of the urease enzymatic activity of several microorganisms. It has been studied for different technological applications, such as soil bio-consolidation, bio-cementation, CO₂ sequestration, among others. Recently, this process has been proposed as a possible process for removing heavy metals from contaminated soils. However, no research has been reported dealing with the MICP process for heavy metal removal from wastewater/waters. This (re)view proposes to consider to such possibility. The main characteristics of MICP are presented and discussed. The precipitation of heavy metals contained in wastewaters/waters via MICP is exanimated based on process characteristics. Moreover, challenges for its successful implementation are discussed, such as the heavy metal tolerance of inoculum, ammonium release as product of urea hydrolysis, and so on. A semi-continuous operation in two steps (cell growth and bio-precipitation) is proposed. Finally, the wastewater from some typical industries releasing heavy metals are examined, discussing the technical barriers and feasibility.

This research focused on the evaluation of the potential use of a soil-isolated bacteria, identified as Staphylococcus equorum, for microbial-induced calcite precipitation (MICP) and copper removal. Isolated bacteria were characterized considering growth rate, urease activity, calcium carbonate precipitation, copper tolerance as minimum inhibitory concentration (MIC) and copper precipitation. Results were compared with Sporosarcina pasteurii, which is considered a model bacteria strain for MICP processes. The results indicated that the S. equorum strain had lower urease activity, calcium removal capacity and copper tolerance than the S. pasteurii strain. However, the culture conditions tested in this study did not consider the halophilic feature of the S. equorum, which could make it a promising bacterial strain to be applied in process water from mining operations when seawater is used as process water. On the other hand, copper removal was insufficient when applying any of the bacteria strains evaluated, most likely due to the formation of a copper–ammonia complex. Thus, the implementation of S. equorum for copper removal needs to be further studied, considering the optimization of culture conditions, which may promote better performance when considering calcium, copper or other metals precipitation.

End-of-life tires (ELT) are a worldwide problem. Rubber, steel, and different textile fibers are the by-products of ELT. Unlike rubber and steel, waste tire textile fibers (WTTF) are disposed of in landfills or burned. This study developed an additive made with WTTF to be incorporated into conventional hot mix asphalt (HMA), and its performance properties were evaluated. First, a characterization of the WTTF used was made and a manufacture protocol was established. Then, a reference HMA was designed and mixtures with different addition percentages (2%, 5% and 8%) of the WTTF-based additive were evaluated. The mechanical properties studied were stiffness modulus, moisture susceptibility, rutting resistance, stripping, and cracking resistance. The results indicated that the addition of the 2% and 5% WTTF-based additive improved these performance properties. Moreover, all addition percentages of the WTTF-based additive evaluated demonstrated a decrease of over 29% in permanent deformation according to the Hamburg Wheel Tracking Test. Thus, the use of the WTTF would not only be valuing a waste, but an asphalt mixture with improved properties would be obtained, contributing to the circular economy by reusing a material and prolonging the useful life of the asphalt mixture.

Heavy metal contamination by wastewater industrial discharged into waterbodies, poses a persistent environmental challenge. In this study, we explored the application of microbially induced carbonate precipitation (MICP) as a sustainable and low-impact strategy for copper removal from synthetic wastewater using Sporosarcina pasteurii . The influence of key operational parameters—including bacterial presence, calcium addition (12.5 mM), and pH variation (6–7)—on copper precipitation was systematically evaluated. Under all tested conditions, copper removal remained within a range of 50–60%, and ANOVA analysis revealed that none of the variables significantly enhanced removal efficiency. Characterization of the precipitates by SEM–EDX and FTIR confirmed the formation of malachite (Cu₂CO₃(OH)₂) as the dominant copper mineral phase, with no evidence of co-precipitation with calcite. These findings indicate that copper carbonate formation occurs independently of calcium ions, and that while microbial urea hydrolysis facilitates carbonate generation, it does not directly influence copper precipitation efficiency. This study contributes novel insights into the mechanistic limitations of MICP for copper removal and highlights the need for exploring more resilient microbial strains or modified operational strategies to enhance metal sequestration performance. The results support the potential for MICP-based technologies in wastewater treatment systems, while also identifying critical factors that constrain its efficiency when applied to copper-contaminated effluents.