Christian Hoflehner

Mr. Christian Hoflehner

Graz University of Technology, Institute of Materials Science, Joining and Forming

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 July 2020 in Steel Research International
Verified
Journal Article
Open access
PDF file
MGMarina Gontijo
Marina Gontijo
Christian HoflehnerChristian Hoflehner
Christian Hoflehner
PEPaul Estermann
Paul Estermann
SISergiu Ilie
Sergiu Ilie
JSJakob Six
Jakob Six
Christof SommitschChristof Sommitsch
Christof Sommitsch
During the continuous casting process, alloys may be more susceptible to crack initiation under some conditions due to lower ductility. A Ti–Nb microalloyed steel is subjected to in situ melted hot tensile tests to evaluate its hot ductility behavior. The ductility is examined at different strain rates and temperatures. The samples are heated with an induction coil to the melting temperature in a vacuum atmosphere. Afterward, they are cooled to the desired test temperatures. Hot tensile tests are conducted by a thermomechanical simulator with strain rates varying from 10−5 to 10−2 s−1. The results show a ductility minimum around 800 °C for the standard strain rate of 10−3 s−1 and a significant influence of the changes in strain rate in the behavior of the alloy for all the tested temperatures. The fracture surfaces are compared for 700, 800, and 900 °C at 10−4, 10−3, and 10−2 s−1, as well as the microstructure. Computer simulations are done for the determination of the transformation temperatures, Scheil–Gulliver solidification simulation, and analysis of the precipitation kinetics during the tests. The results from simulations are discussed in comparison with the ones seen experimentally.

29 August 2018 in Journal of Materials Engineering and Performance
Verified
Journal Article
Open access
PDF file
Christian HoflehnerChristian Hoflehner
Christian Hoflehner
SIS. Ilie
S. Ilie
JSJ. Six
J. Six
CBC. Beal
C. Beal
CSC. Sommitsch
C. Sommitsch
The hot ductility of a low alloyed Cr-Mo steel has been investigated to evaluate the surface cracking sensitivity within the straightening or unbending regime during the continuous casting process. Tensile samples were subjected to various thermal treatments, including melting and solidification, and were tested at deforming temperatures ranging between 600 and 1100 °C using a strain rate of 10−3 s−1. Hot ductility was evaluated based on reduction in area measurement and metallographic investigations. The investigated steel exhibits a drop in ductility at around 800 °C due to intergranular cracking. Microstructural examinations and supplementary thermokinetic computer simulations were carried out to describe the evolution of the microstructure during solidification and cooling.

30 December 2020 in Metals
Verified
Journal Article
Open access
PDF file
MGMarina Gontijo
Marina Gontijo
Christian HoflehnerChristian Hoflehner
Christian Hoflehner
SISergiu Ilie
Sergiu Ilie
JSJakob Six
Jakob Six
Christof SommitschChristof Sommitsch
Christof Sommitsch
Cracking during the continuous casting process is undesirable and continuous work is being carried out to find further improvements and understand the mechanisms that lead to failure. Investigations on the hot ductility behavior of a continuously cast low alloyed steel using different holding times before straining were done in the present work. Samples were heated to melting temperature in a vacuum atmosphere and then cooled to one of the three test temperatures chosen: 750, 850, and 900 °C. When the desired temperature was reached, the sample was isothermally held for either 10, 90, 300, or 3600 s before the tensile test started, with a strain rate of 10−3 s−1. The reduction of area was measured, SEM images of the fractured surfaces were taken plus LOM images for the analysis of the microstructure. The results show that there was no significant change in the ductility at any of the temperatures until 300 s, with a change in behavior at 3600 s. This was further confirmed with the images and precipitation kinetics simulations. The results are described and compared.


1 January 2019
Verified
Conference Paper
Open access
Christian HoflehnerChristian Hoflehner
Christian Hoflehner
CBColine Beal
Coline Beal
Christof SommitschChristof Sommitsch
Christof Sommitsch
JSJakob Six
Jakob Six
SISergio Ilie
Sergio Ilie