Reference evapotranspiration (ET₀) is one important agrometeorological parameter for hydrological studies and climate risk zoning. ET₀ calculation by the FAO Penman–Monteith method requires several input data. However, the availability of climate data has been a problem in many places around the world, so the study of scenarios with different combinations of climate data has become essential. The aim of this study was to evaluate the performance of artificial neural network (ANN), random forest (RF), support vector machine (SVM), and multiple linear regression (MLR) approaches to estimate monthly mean ET₀ with different input data combinations and scenarios. Three scenarios were evaluated: at the state level, where all climatological stations were used (Scenario I–SI), and at the regional level, where the Minas Gerais state was divided according to the climatic classifications of Thornthwaite (Scenario II–SII) and Köppen (Scenario III–SIII). ANN and RF performed better in ET₀ estimation among the models evaluated in the SI, SII, and SIII scenarios with the following data combinations: (i) latitude, longitude, altitude, month, mean, maximum and minimum temperature, and relative humidity and (ii) latitude, longitude, altitude, month, mean temperature, and relative humidity. SVM and MLR models are recommended for all scenarios in situations with limited climatic data where only air temperature and relative humidity data are available. The results and information presented in this study are important for the agricultural chain and water resources in Minas Gerais state.

This study aimed to explore the influence of flight altitude, density, and distribution of ground control points (GCPs) on the digital terrain model (DTM) in surveys conducted by unmanned aerial vehicles (UAVs). A total of 144 photogrammetric projects consisting of 399 aerial photos were carried out in a 2 ha area. These photogrammetric projects involved six GCP distributions (edge, center, diagonal, parallel, stratified, and random), six GCP densities, and four flight altitudes (30, 60, 90, and 120 m). The response surface methodology was used to find interference factors and total root-mean-square error (RMSEt) as well. The 60 m flight altitude presented was the most efficient. Central GCP distribution was observed to have low precision. Using stratified and random edge distributions, 10 GCPs are recommended to achieve geometric precision below 0.07 m at any flight height. However, for studies requiring up to 0.07 m precision, the best distribution was parallel with 4 GCPs at any altitude. Diagonal positioning of the GCPs showed RMSEt values below 0.11 m with 4 GCPs at any altitude. A good distribution of GCPs was found to be important, but the density of GCPs per image was more relevant when obtaining a lower RMSEt.

The development of approaches to determine the spatial variability of nitrogen (N) into coffee leaves is essential to increase productivity and reduce production costs and environmental impacts associated with excessive N applications. Thus, this study aimed to assess the potential of the Random Forest (RF) machine learning method applied to vegetation indices (VI) obtained from Remotely Piloted Aircraft (RPA) images to measure the N content in coffee plants. A total of 10 VI were obtained from multispectral images by a camera attached to a rotary-wing RPA. The RGB orthomosaic was used to determine sampling points at the crop area, which were ranked by N levels in the plants as deficient, critical, or sufficient. The chemical analysis of N content in the coffee leaves, as well as the VI values in sample points, were used as input parameters for the image training and its classification by the RF. The suggested model has shown global accuracy and a kappa coefficient of up to 0.91 and 0.86, respectively. The best results were achieved using the Green Normalized Difference Vegetation (GNDVI) and Green Optimized Soil Adjusted Vegetation Index (GOSAVI). In addition, the model enabled the evaluation of the spatial distribution of N in the coffee trees, as well as quantification of N deficiency in the crop for the whole area. The GNDVI and GOSAVI allowed the verification that 22% of the entire crop area had plants with N deficiency symptoms, which would result in a reduction of 78% in the amount of N applied by the producer.

Adobe is an efficient construction material for several reasons, such as its thermal comfort, sustainability, and lower energy cost, as well as the simplicity of its production and execution. However, challenges such as water absorption, capillarity, and compressive strength should be investigated to improve its physical and mechanical properties. “Synthetic termite saliva” (STS) is an excellent stabilizer with high cohesive and hydrophobic power. Therefore, the objective of this work was to evaluate the effects of STS incorporation into adobe, analyzing its physical, mechanical and thermal properties. Five treatments were studied: 0 (control); 0.1; 0.2; 0.4 and 0.8% STS by mass. These adobe samples were evaluated according to bulk density, linear shrinkage, capillarity, water absorption, thermal conductivity and compressive strength, according to Norma Técnica de Edificación (NTE) E0.80 testing using a new methodology. Linear shrinkage decreases from 2.7 to 1.91 cm with 0.4% STS. Capillarity decreases with the increasing amounts of STS. Water absorption decreased from 12.03 to 6.31% using 0.4% STS, and its mass was reduced from 779 to 19 grams. The thermal conductivity showed no differences between concentrations. The compressive strength was reduced but was still acceptable based on NTE E.080. The stabilization of the adobe using STS showed an improvement in its physical properties, mainly due to its hydrophobic power.

RESUMO O sensoriamento remoto multiespectral apresenta-se como metodologia confiável e viável para auxiliar o produtor na decisão para melhores práticas de manejo, garantindo uma produção agrícola mais eficiente e sustentável. Objetivou-se, com este trabalho, identificar e mapear o estresse em lavoura cafeeira, causado por variáveis bióticas e abióticas, por meio de índices de vegetação derivados de imagens multiespectrais Landsat-5 Thematic Mapper (TM). A malha amostral foi composta por 67 pontos, sendo cada ponto amostral constituído por cinco plantas. As análises de incidência de cercosporiose e de infestação do bicho-mineiro, nas folhas, de pH, matéria orgânica e textura do solo e teores foliares de nutrientes foram realizadas em cada um dos pontos amostrais e correlacionadas com 16 índices de vegetação obtidos de imagens referentes à época das análises. Os índices de vegetação apresentaram distribuição espacial semelhante à distribuição espacial das variáveis agronômicas, na lavoura. Houve correlação positiva dos índices com a infestação do bicho-mineiro e com os teores de silte e argila no solo e concentrações de Mg, Cu, B e Mn nas folhas, e negativa, com a incidência de cercosporiose e com pH e teor de areia do solo. Com base nesses resultados, foi possível mapear e identificar as alterações na reflectância espectral dos cafeeiros, causadas por essas variáveis agronômicas.