Diego Guerrero Sevilla

Mr. Diego Guerrero Sevilla

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 April 2022 in Journal of Clinical Medicine
Verified
Journal Article
Open access
PDF file
Lloyd A. CourtenayLloyd A. Courtenay
Lloyd A. Courtenay
Diego Gonzalez-AguileraDiego Gonzalez-Aguilera
Diego Gonzalez-Aguilera
Susana LagüelaSusana Lagüela
Susana Lagüela
Susana Del PozoSusana Del Pozo
Susana Del Pozo
Camilo RuizCamilo Ruiz
Camilo Ruiz
Pablo Rodríguez-GonzálvezPablo Rodríguez-Gonzálvez
Pablo Rodríguez-Gonzálvez
Non-melanoma skin cancer, and basal cell carcinoma in particular, is one of the most common types of cancer. Although this type of malignancy has lower metastatic rates than other types of skin cancer, its locally destructive nature and the advantages of its timely treatment make early detection vital. The combination of multispectral imaging and artificial intelligence has arisen as a powerful tool for the detection and classification of skin cancer in a non-invasive manner. The present study uses hyperspectral images to discern between healthy and basal cell carcinoma hyperspectral signatures. Upon the combined use of convolutional neural networks, with a final support vector machine activation layer, the present study reaches up to 90% accuracy, with an area under the receiver operating characteristic curve being calculated at 0.9 as well. While the results are promising, future research should build upon a dataset with a larger number of patients.

17 August 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Susana Del PozoSusana Del Pozo
Susana Del Pozo
Pablo Rodríguez-GonzálvezPablo Rodríguez-Gonzálvez
Pablo Rodríguez-Gonzálvez
DHDavid Hernandez-Lopez
David Hernandez-Lopez
JPJorge Onrubia Pintado
Jorge Onrubia Pintado
DSDiego Guerrero Sevilla
Diego Guerrero Sevilla
Diego Gonzalez-AguileraDiego Gonzalez-Aguilera
Diego Gonzalez-Aguilera
Close-range photogrammetry is a powerful and widely used technique for 3D reconstruction of archaeological environments, specifically when a high-level detail is required. This paper presents an innovative low-cost system that allows high quality and detailed reconstructions of indoor complex scenarios with unfavorable lighting conditions by means of close-range nadir and oblique images as an alternative to drone acquisitions for those places where the use of drones is limited or discouraged: (i) indoor scenarios in which both loss of GNSS signal and need of long exposure times occur, (ii) scenarios with risk of raising dust in suspension due to the proximity to the ground and (iii) complex scenarios with variability in the presence of nooks and vertical elements of different heights. The low-altitude aerial view reached with this system allows high-quality 3D documentation of complex scenarios helped by its ergonomic design, self-stability, lightness, and flexibility of handling. In addition, its interchangeable and remote-control support allows to board different sensors and perform both acquisitions that follow the ideal photogrammetric epipolar geometry but also acquisitions with geometry variations that favor a more complete and reliable reconstruction by avoiding occlusions. This versatile pole photogrammetry system has been successfully used to 3D reconstruct and document the “Cueva Pintada” archaeological site located in Gran Canaria (Spain), of approximately 5400 m2 with a Canon EOS 5D MARK II SLR digital camera. As final products: (i) a great quality photorealistic 3D model of 1.47 mm resolution and ±8.4 mm accuracy, (ii) detailed orthophotos of the main assets of the archaeological remains and (iii) a visor 3D with associated information on the structures, materials and plans of the site were obtained.

6 March 2025 in Drones
Verified
Journal Article
Open access
PDF file
IBInés Barbero-García
Inés Barbero-García
DSDiego Guerrero Sevilla
Diego Guerrero Sevilla
DSDavid Sánchez-Jiménez
David Sánchez-Jiménez
Ángel Marqués-MateuÁngel Marqués-Mateu
Ángel Marqués-Mateu
Diego Gonzalez-AguileraDiego Gonzalez-Aguilera
Diego Gonzalez-Aguilera
River morphology is highly dynamic, requiring accurate datasets and models for effective management, especially in flood-prone regions. Climate change and urbanisation have intensified flooding events, increasing risks to populations and infrastructure. Woody debris, a natural element of river ecosystems, poses a dual challenge: while it provides critical habitats, it can obstruct water flow, exacerbate flooding, and threaten infrastructure. Traditional debris detection methods are time-intensive, hazardous, and limited in scope. This study introduces a novel tool integrating artificial intelligence (AI) and computer vision (CV) to detect woody debris in rivers using aerial drone imagery that is fully integrated into a geospatial Web platform (WebGIS). The tool identifies and segments debris, assigning risk levels based on obstruction severity. When using orthoimages as input data, the tool provides georeferenced locations and detailed reports to support flood mitigation and river management. The methodology encompasses drone data acquisition, photogrammetric processing, debris detection, and risk assessment, and it is validated using real-world data. The results show the tool’s capacity to detect large woody debris in a fully automatic manner. This approach automates woody debris detection and risk analysis, making it easier to manage rivers and providing valuable data for assessing flood risk.

27 January 2026 in Drones
Verified
Journal Article
Open access
PDF file
IUIgnacio Ugarte
Ignacio Ugarte
DSDiego Guerrero Sevilla
Diego Guerrero Sevilla
PCPedro Carrasco
Pedro Carrasco
JGJavier Carrasco García
Javier Carrasco García
Diego Gonzalez-AguileraDiego Gonzalez-Aguilera
Diego Gonzalez-Aguilera
Unexploded ordnance (UXO) poses a significant hazard in controlled outdoor testing/training areas. This paper assesses the effectiveness of aerial drone-mounted magnetometry for detecting buried UXO located outside the designated landing areas of the National Training Center (CENAD) of San Gregorio (Zaragoza, Spain), considered the largest manoeuvre area in Europe. To this end, a high-resolution aeromagnetic survey was conducted using a GEM GSMP-35U proton magnetometer mounted on a hexacopter drone. Data were collected at flight heights of 7 m and 2 m above ground level along a grid with 1 m line spacing. For its validation, eleven UXOs were deliberately buried at known coordinates to evaluate the system’s sensitivity and spatial resolution under operational conditions. The results demonstrate the capability of aerial drone-based magnetometry to detect small magnetic anomalies (with amplitudes between 2 and 18 nT) associated with buried UXO in complex environments characterised by high ferromagnetic noise, achieving signal-to-noise ratios greater than 5 (SNR > 5) at 2 m height and a geolocation accuracy of approximately 0.5 m. These findings support the use of unmanned aerial magnetometry as a viable tool for identifying hazardous remnants in military training ranges and field scenarios, enabling coverage of 0.53 ha in less than one hour of effective flight time.

25 August 2025 in Remote Sensing
Verified
Journal Article
Open access
PDF file
DSDiego Guerrero Sevilla
Diego Guerrero Sevilla
Mariano Gonzalez-de-SotoMariano Gonzalez-de-Soto
Mariano Gonzalez-de-Soto
Susana Del PozoSusana Del Pozo
Susana Del Pozo
JMJosé Antonio Martín-Jiménez
José Antonio Martín-Jiménez
Pablo Rodríguez-GonzálvezPablo Rodríguez-Gonzálvez
Pablo Rodríguez-Gonzálvez
Diego Gonzalez-AguileraDiego Gonzalez-Aguilera
Diego Gonzalez-Aguilera
This study presents a methodology to automatically assess visibility distance on secondary roads using mobile LiDAR systems. The method evaluates both braking and overtaking visibility distances based on the 3D geometry of the road, applying a dynamic analysis through a series of parametrised quadrangular pyramids that simulate the driver’s field of view. Road segments are classified into three risk levels, low, medium, and high, according to the feasibility of stopping or overtaking safely. The methodology was validated on three secondary roads in Spain, achieving an average accuracy of 92.7% when compared to existing road signage. These results demonstrate the method’s potential to improve road safety through continuous, data-driven visibility monitoring. Its application supports advanced driver assistance systems and offers road authorities a reliable tool for proactive risk assessment and road infrastructure planning.

10 March 2025 in Drones
Verified
Journal Article
Open access
PDF file
IBInés Barbero-García
Inés Barbero-García
DSDiego Guerrero Sevilla
Diego Guerrero Sevilla
DSDavid Sánchez-Jiménez
David Sánchez-Jiménez
DHDavid Hernandez-Lopez
David Hernandez-Lopez
Rail systems are essential for economic growth and regional connectivity, but aging infrastructures face challenges from increased demand and environmental factors. Traditional inspection methods, such as visual inspections, are inefficient and costly and pose safety risks. Unmanned Aerial Vehicles (UAVs) have become a viable alternative to rail mapping and monitoring. This study presents a robust method for the 3D extraction of rail tracks from UAV-based aerial imagery. The approach integrates YOLOv8 for initial detection and segmentation, photogrammetry for 3D data extraction and computer vision techniques with a Multiview approach to enhance accuracy. The tool was tested in a real-world complex scenario. Errors of 2 cm and 4 cm were obtained for planimetry and altimetry, respectively. The detection performance and metric results show a significant reduction in errors and increased precision compared to intermediate YOLO-based outputs. In comparison to most image-based methodologies, the tool has the advantage of generating both accurate altimetric and planimetric data. The generated data exceed the requirements for cartography at a scale of 1:500, as required by the Spanish regulations for photogrammetric works for rail infrastructures. The tool is integrated into the open-source QGIS platform; the tool is user-friendly and aims to improve rail system maintenance and safety.