Dong-Ryeol Oh

Prof. Dong-Ryeol Oh

Electronics Engineering, Jeju National University, Jeju, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 August 2015 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
JKJong-In Kim
Jong-In Kim
DODong-Ryeol Oh
Dong-Ryeol Oh
DJDong-Shin Jo
Dong-Shin Jo
BSBa-Ro-Saim Sung
Ba-Ro-Saim Sung
SRSeung-Tak Ryu
Seung-Tak Ryu
A 7 bit 2 GS/s flash ADC fabricated in a 65nm CMOS process is presented. The proposed cascaded latch interpolation technique achieves a 4 × interpolation factor with only dynamic comparators. A background latching-time adjustment scheme utilizing a replica latch array ensures an interpolation capability that is robust to process, voltage and temperature variations. The measured peak INL and DNL of 0.64 LSB and 0.58 LSB, respectively, after comparator offset calibration prove successful interpolation operation. The measured SNDR and SFDR were 38.12 dB and 49.05 dB, respectively, with a 1.08GHz input at 2 GS/s operation while consuming 20.7 mW of total power. This ADC achieves a figure of merit of 157 fJ/conversion-step with a Nyquist input at 2 GS/s.

30 December 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
DODong-Ryeol Oh
Dong-Ryeol Oh
KMKyoung-Jun Moon
Kyoung-Jun Moon
WLWon-Mook Lim
Won-Mook Lim
YKYe-Dam Kim
Ye-Dam Kim
EAEun-Ji An
Eun-Ji An
SRSeung-Tak Ryu
Seung-Tak Ryu
An 8-bit 1-GS/s asynchronous loop-unrolled (LU) successive approximation register (SAR)-Flash hybrid analog-to-digital converter (ADC) with complementary dynamic amplifiers (CDAs) is presented. The proposed ADC is a combination of an asynchronous LU-SAR ADC and a reference-embedding 8x interpolating flash (I-Flash) ADC to enhance the conversion speed. Operating the CDAs in a dual-edge manner makes it possible to achieve an 8-bit resolution with only four CDAs and one capacitive digital-to-analog converter (C-DAC), which improves the power and area efficiency as well as the input bandwidth. A prototype ADC implemented in a 28-nm CMOS process occupies a 0.002 mm² active area. The measured differential non-linearity (DNL) and integral non-linearity (INL) after offset calibration is 0.59 and 0.82 LSB, respectively. With a 0.499-GHz input, the measured signal-to-noise and distortion ratio (SNDR) and the spurious-free dynamic range (SFDR) are 45.5 and 59.4 dB, respectively. The measured effective resolution bandwidth (ERBW) is above 3 GHz. The power consumption at 1-GS/s conversion is 2.55 mW with a supply voltage of 1.1 V, leading to a figure of merit (FoM) of 16.6 fJ/conversion-step.

5 October 2018 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
DODong-Ryeol Oh
Dong-Ryeol Oh
JKJong-In Kim
Jong-In Kim
DJDong-Shin Jo
Dong-Shin Jo
WKWoo-Cheol Kim
Woo-Cheol Kim
DCDong-Jin Chang
Dong-Jin Chang
SRSeung-Tak Ryu
Seung-Tak Ryu
A 6-bit 2.5-GS/s 8x dynamic interpolating flash analog-to-digital converter (ADC) with an offset calibration technique for interpolated voltage-to-time converters (VTCs) is presented for high-speed applications. The dynamic-amplifier-structured VTC enables linear zero-crossing (ZX) interpolation in the time domain with an interpolation factor of 8, which reduces the number of front-end VTCs to one-sixth the original structure. The reduced number of VTCs lowers the power consumption, load capacitance to the track-and-holder (T/H), and overhead of VTC offset calibration. The sequential slope-matching offset calibration scheme is proposed not only for VTC offset but also for interpolated ZX accuracy. The prototype 6-bit 2.5-GS/s flash ADC was implemented in a 65-nm CMOS process and occupies a 0.12 mm² chip area, including offset calibration circuitry. The measured differential non-linearity (DNL) and integral non-linearity (INL) after offset calibration are 0.68 and 0.65 LSB, respectively. With a 1.23 GHz input, the measured signal-to-noise and distortion ratio (SNDR) and spurious-free dynamic range (SFDR) are 33.84 and 45.07 dB, respectively, with power consumption of 7.5 mW under a supply voltage of 0.85 V. The prototype ADC achieves a figure of merit (FoM) of 74.7 fJ/conversion step at 2.5 GS/s.

1 April 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
DODong-Ryeol Oh
Dong-Ryeol Oh
MSMin-jae Seo
Min-jae Seo
SRSeung-Tak Ryu
Seung-Tak Ryu
A 7-bit 3 GS/s two-channel time-interleaved two-step flash analog-to-digital converter (ADC) with 7-GHz effective resolution bandwidth (ERBW) is presented. A reference-embedding flash ADC for a fine stage having only a single capacitive digital-to-analog converter improves the power efficiency and area efficiency as well as the input bandwidth. The proposed sample-and-hold sharing structure not only improves the input bandwidth by removing the effect of the input capacitance of the fine ADC (FADC) but also eliminates the gain error between the coarse ADC and the FADC. The advanced sequential slope-matching offset calibration technique in the eight-time interpolated FADC improves the gain of the voltage-to-time converter and the interpolation linearity. A prototype ADC implemented in a 40-nm CMOS process occupies 0.03 mm 2 , including offset calibration circuitry. The measured peak differential non-linearity (DNL) and integral non-linearity (INL) after calibration are 0.53 and 0.47 LSB, respectively. With a 1.49-GHz input, the measured signal-to-noise and distortion ratio (SNDR) and spurious-free dynamic range (SFDR) are 39.94 and 55.78 dB, respectively. The ERBW without and with time skew calibration is 4.8 and 7 GHz, respectively. The power consumption is 6.8 mW under a supply voltage of 0.9 V, leading to a figure of merit (FoM) of 28 fJ/conversion-step at 3 GS/s.

1 June 2020
Verified
Conference Paper
Closed access
DODong-Ryeol Oh
Dong-Ryeol Oh
KMKyoung-Jun Moon
Kyoung-Jun Moon
WLWon-Mook Lim
Won-Mook Lim
YKYe-Dam Kim
Ye-Dam Kim
EAEun-Ji An
Eun-Ji An
SRSeung-Tak Ryu
Seung-Tak Ryu
An 8b SAR-Flash ADC is proposed, where four reset-power-free complementary dynamic amplifiers (CDAs) are first engaged to a 4b loop-unrolled (LU) SAR conversion and then reutilized for a 4.5b fine interpolating-flash conversion. The hardware-reusing flash ADC not only saves power consumption and area but also reduces the number of conversion cycles. A prototype 1GS/s ADC in 28nm CMOS achieves 45.5dB SNDR at a Nyquist input with 2.55mW power consumption, leading to a FoM Walden of 16.6 fJ/c-s.

1 October 2024 in IEEE Open Journal of the Solid-State Circuits Society
Verified
Journal Article
Open access
KLKent Edrian Lozada
Kent Edrian Lozada
DCDong-Jin Chang
Dong-Jin Chang
DODong-Ryeol Oh
Dong-Ryeol Oh
MSMin-Jae Seo
Min-Jae Seo
SRSeung-Tak Ryu
Seung-Tak Ryu
The distinct advantages of low power consumption and hardware compactness make SAR ADCs especially appealing in scaled CMOS technologies, garnering significant attention. The residue left on the capacitor digital-to-analog converter (CDAC) after conversion in the SAR ADC negates the need for complex residue extraction circuits. This crucial feature has inspired numerous SAR-assisted architectural variations, employed in a range of applications from high resolution to high speed. This paper introduces several energy-efficient hybrid ADC architectures that incorporate SAR ADCs as their sub blocks including the followings: SAR-assisted subranging SAR, which saves DAC switching power and can detect skew errors for time-interleaved ADCs; SAR-flash hybrid for energy-efficient high-speed conversion; SAR-assisted dual-residue pipelined ADC, which eliminates the stringent requirement for residue gain accuracy; and SAR-assisted delta-sigma modulator (DSM) with digital-domain noise coupling, which reduces the number of required analog integrators.