Min-jae Seo

Dr. Min-jae Seo

Samsung electronics
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 April 2018 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
MSMin-jae Seo
Min-jae Seo
YRYi-Ju Roh
Yi-Ju Roh
DCDong-Jin Chang
Dong-Jin Chang
WKWan Kim
Wan Kim
YKYe-Dam Kim
Ye-Dam Kim
SRSeung-Tak Ryu
Seung-Tak Ryu
This brief proposes a code-reusable design methodology for synthesizable successive approximation register (SAR) ADCs based on the digital design flow to significantly reduce design effort. The SAR ADCs are composed of a capacitor-DAC (CDAC) macro cell generated by a CDAC compiler and analog functional blocks implemented utilizing digital standard cells. Two prototypes of SAR ADCs (12-bit 100 kS/s and 11-bit 50 MS/s) are fabricated in different CMOS processes (180 nm and 28 nm). The prototype ADCs prove the effectiveness of the proposed design methodology with comparable performances with full-custom designed SAR ADCs.

19 December 2017 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
IJIl-Hoon Jang
Il-Hoon Jang
MSMin-jae Seo
Min-jae Seo
SCSang-Hyun Cho
Sang-Hyun Cho
JLJae-Keun Lee
Jae-Keun Lee
SBSeung-Yeob Baek
Seung-Yeob Baek
SRSeung-Tak Ryu
Seung-Tak Ryu
This paper introduces a high-order continuous-time (CT) delta-sigma modulator (DSM) that applies digital-domain noise coupling (DNC) based on the structural advantages of the successive-approximation register (SAR) analog-to-digital converter (ADC), which makes the implementation of second-order noise coupling very simple. Due to digital-domain implementation as well as the SAR ADC where the key building blocks are embedded for the proposed DNC, compact size and efficient power consumption could be designed. For low circuit noise, a feedback DAC is implemented with a tri-level current-steering DAC. Tri-level data-weight averaging (TDWA) improves the linearity of the DAC. With the proposed DNC and TDWA, a prototype CT DSM fabricated in a 28-nm CMOS achieves a peak 74.4-dB SNDR and an 80.8-dB dynamic range (DR) for a 10-MHz BW with an oversampling ratio of 16, resulting in a Schreier FoM DR of 174.5 dB. The chip area occupies 0.1 mm 2 , and the power consumption is 4.2 mW.

1 April 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
DODong-Ryeol Oh
Dong-Ryeol Oh
MSMin-jae Seo
Min-jae Seo
SRSeung-Tak Ryu
Seung-Tak Ryu
A 7-bit 3 GS/s two-channel time-interleaved two-step flash analog-to-digital converter (ADC) with 7-GHz effective resolution bandwidth (ERBW) is presented. A reference-embedding flash ADC for a fine stage having only a single capacitive digital-to-analog converter improves the power efficiency and area efficiency as well as the input bandwidth. The proposed sample-and-hold sharing structure not only improves the input bandwidth by removing the effect of the input capacitance of the fine ADC (FADC) but also eliminates the gain error between the coarse ADC and the FADC. The advanced sequential slope-matching offset calibration technique in the eight-time interpolated FADC improves the gain of the voltage-to-time converter and the interpolation linearity. A prototype ADC implemented in a 40-nm CMOS process occupies 0.03 mm 2 , including offset calibration circuitry. The measured peak differential non-linearity (DNL) and integral non-linearity (INL) after calibration are 0.53 and 0.47 LSB, respectively. With a 1.49-GHz input, the measured signal-to-noise and distortion ratio (SNDR) and spurious-free dynamic range (SFDR) are 39.94 and 55.78 dB, respectively. The ERBW without and with time skew calibration is 4.8 and 7 GHz, respectively. The power consumption is 6.8 mW under a supply voltage of 0.9 V, leading to a figure of merit (FoM) of 28 fJ/conversion-step at 3 GS/s.

5 February 2018 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
SHSun-Il Hwang
Sun-Il Hwang
JCJae-Hyun Chung
Jae-Hyun Chung
HKHyeon-June Kim
Hyeon-June Kim
IJIl-Hoon Jang
Il-Hoon Jang
MSMin-jae Seo
Min-jae Seo
SRSeung-Tak Ryu
Seung-Tak Ryu
This paper presents a CMOS image sensor (CIS) utilizing a noise-shaping successive-approximation register analog-to-digital converter (SAR ADC) incorporating the delta-readout scheme. While the noise-shaping SAR ADC with a proposed two-tap passive finite-impulse response (FIR) filter improves effective resolution, the delta-readout scheme reduces its power consumption. A prototype 1920 × 1440 pixel CIS was fabricated in a 90-nm CIS process. A single-channel readout SAR ADC occupying an area of 22.4 μm × 715 μm was implemented for reading out 16 columns of pixel array, consuming 437 μW. Owing to the proposed noise-shaping SAR ADC with oversampling ratio of 16, this paper achieves a noise reduction of 14 dB compared with the noise of a conventional SAR ADC. The delta-readout reduces the power consumption of the SAR ADC by 10% due to the high hit rate of the full high definition image format. The measured differential nonlinearity of the ADC is +0.77/-0.54 LSB and the integral nonlinearity is +0.81/-0.5 LSB. The prototype CIS consumes a total power of 64 mW and achieves a dynamic range of 66.5 dB and a figure of merit of 127 μV·nJ at a data rate of 138 Mpixels/s.

13 July 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
MSMin-jae Seo
Min-jae Seo
DJDong-Hwan Jin
Dong-Hwan Jin
YKYe-Dam Kim
Ye-Dam Kim
JKJong-Pal Kim
Jong-Pal Kim
SRSeung-Tak Ryu
Seung-Tak Ryu
This article presents a power-efficient buffer-embedding successive approximation register (SAR) analog-to-digital converter (ADC) that utilizes a core power supply for the source-follower buffer, having a rail-to-rail signal swing due to the capacitive-level shifting bias scheme. Also, to implement the switched-capacitor (SC) level-shifting bias scheme without bias leakage issue, a negative boosting circuit is proposed. The boosting circuit is designed without any reliability issue, even with the use of thin-oxide transistors. For low-power applications, such as the biomedical system and CMOS image sensor, the proposed ADC incorporates a skip-reset (SR) scheme, a low-power delta-readout method. In conjunction with 8x oversampling and the power-saving SR technique that has inherent chopping capability, a prototype SAR ADC fabricated in a 180-nm CMOS technology achieves a peak 74.8-dB signal-to-noise and distortion ratio (SNDR) and an 89.1-dB spurious free dynamic range (SFDR) for a 640-kHz bandwidth (BW) with an oversampling ratio (OSR) of 8, resulting in a Schreier figure of merit (FoM) of 167.3 dB. The chip area occupies 0.192 mm², and the power consumption is 180.1 μW.

8 February 2024 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
JCJae-Hyun Chung
Jae-Hyun Chung
YKYe-Dam Kim
Ye-Dam Kim
CPChang-Un Park
Chang-Un Park
KPKun-Woo Park
Kun-Woo Park
DODong-Ryeol Oh
Dong-Ryeol Oh
SRSeung-Tak Ryu
Seung-Tak Ryu
This article presents an energy-efficient high-resolution dual-residue (D-R) pipelined-successive approximation register (SAR) analog-to-digital converter (ADC), with a backend capacitive interpolating SAR ADC incorporated with noise-shaping (NS) capability. The residue amplifier design could be simplified as the residue is pre-amplified by the amplifier for the kT/ $C$ -noise cancellation. Moreover, the proposed segmented digital-to-analog converter (DAC) structure overcomes parasitic capacitance limitations in the capacitive interpolation, improving resolution along with the gain-error-free advantage of the D-R structure. Fabricated in a 180-nm CMOS technology, the prototype ADC achieves an 81.2-dB signal-to-noise and distortion ratio (SNDR) and an 89.9-dB spurious-free dynamic range (SFDR) in a 1.5-MHz bandwidth (BW) at an over-sampling ratio (OSR) of 8 with a 170.4-dB SNDR Schreier figure-of-merit (FoM) without any calibration.