The cascade multilevel inverters are widely used in industrial manufacturing processes for DC-AC conversion. Therefore, the reliability and efficiency improvement, optimized control, and fault-tolerant strategies are areas of interest for researchers. The fault tolerance strategies applied to cascade multilevel inverters are classified as material redundancy and analytical redundancy. This paper presents the use of the Z-source converter as a fault reconfiguration method applied to a cascade multilevel inverter. On the one hand, the proposed approach has the characteristic of combining the use of material redundancy (modifying the output voltage by changing the Z-source operation), and on the other hand, it has the use of analytical redundancy (modifying the switching sequence of the multilevel inverter, changing from symmetrical to asymmetrical operation mode). This approach has been validated by experimental results of the system under fault-free conditions and employing the Z-source converter as the main fault reconfiguration element. The proposed fault reconfiguration strategy allows the cascaded multilevel inverter to continue to operate even in the presence of a fault by having continuous operation.
This study presents a mathematical model of a parabolic trough solar collector with photovoltaic cells integrated into its solar receiver. A case study is presented, utilizing meteorological data obtained from the localities of Cuernavaca and Mexicali in Mexico. The results demonstrate moderately variable electrical and thermal energy production for Cuernavaca (387.93 kWh to 239.38 kWh and 1036.11 kWh to 641.26 kWh, respectively). In contrast, the production of electrical and thermal energy in Mexicali exhibited considerably greater fluctuations (515.16 kWh to 177.69 kWh and 1424.39 kWh to 448.88 kWh, respectively). Furthermore, a parametric study is presented, which analyzes the impact of solar receiver geometry and mass flow on the model’s behavior. The results demonstrate that the pipe length exerts the most significant influence on the electrical and thermal power output (1.21 kW to 2.22 kW and 3.7 kW to 6.9 kW, respectively). Additionally, the diameter has an impact on the thermal power output (5.23 kW to 7.1 kW) and the electrical and thermal efficiency (0.18 to 0.15 and 0.54 to 0.74, respectively). Modifying the mass flow facilitates the enhancement of electrical power and efficiency (1.54 kW to 1.72 kW and 0.16 to 0.18, respectively) while concurrently preventing a significant reduction in thermal power and efficiency (5.4 kW to 5.3 kW and 0.56 to 0.55, respectively). A script with the developed model is provided.
The increasing adoption of electric vehicles has driven the development of charging technologies that meet growing demands for power, efficiency, and grid compatibility. This review presents a comprehensive analysis of the EV charging ecosystem, covering Level 3 DC charging stations, power converter topologies, and the role of energy storage systems in supporting grid integration. Commercial solutions and academic prototypes are compared across key parameters such as voltage, current, power, efficiency, and communication protocols. The study highlights trends in charger architectures—including buck, boost, buck–boost, LLC resonant, and full-bridge configurations—while also addressing the integration of stationary storage as a buffer for fast charging stations. Special attention is given to wide-bandgap semiconductors like SiC and GaN, which enhance efficiency and thermal performance. A significant gap persists between the technical transparency of commercial systems and the ambiguity often observed in prototypes, highlighting the urgent need for standardized research reporting. Although converter efficiency is no longer a primary constraint, substantial challenges remain regarding infrastructure availability and the integration of storage with charging stations. This paper seeks to offer a comprehensive perspective on the design and deployment of smart, scalable, and energy-efficient charging systems, with particular emphasis on cascaded and bidirectional topologies, as well as hybrid storage solutions, which represent promising pathways for the advancement of future EV charging infrastructure.
This paper presents a symmetry-based analysis applied to a dual-inverter system that powers different types of loads. The configuration consists of two three-phase inverters controlled using carrier-based space-vector pulse-width modulation (CBSV-PWM). The study investigates how the phase-shift angle α between the two inverters influences multilevel voltage synthesis and the resulting electrical behavior of the system. The main contribution is the systematic characterization of the complementary angular symmetry between phase-shift α and 360°-α, establishing their relationship with the differential output-voltage magnitude and the resulting voltage and current waveforms. The complete phase-shift range from 0° to 360° is evaluated to identify the evolution of the synthesized voltage and the symmetry between complementary operating points. Resistive, resistive–inductive, and induction-motor equivalent loads are considered to examine the influence of the load characteristics on the system response. PSIM simulation results show that complementary phase-shift pairs exhibit closely corresponding voltage behavior, while the maximum differential-voltage magnitude occurs around α = 180°. The results demonstrate that the phase-shift angle provides a systematic means of characterizing the voltage-synthesis behavior of the dual-inverter configuration and its complementary angular symmetry under different load conditions.
The growing use of electric vehicles (EVs) requires fast charging solutions capable of delivering high power levels with greater efficiency and less impact on the power grid. This article presents the design and simulation of a Level 3 fast direct current (DC) charger for electric vehicles based on an LLC resonant DC-DC converter. The proposed architecture incorporates an isolated LLC resonant converter, selected for its soft switching capability, low switching losses, and reduced electromagnetic interference (EMI). The main contribution of this work is the design and simulation of a 50 kW LLC resonant converter developed specifically for a Level 3 DC fast charger for electric vehicles, a power level that, to the authors’ knowledge, has not been previously described in the current scientific literature using this topology. For the proposed converter, it has been proposed to use commercially available wide bandgap (WBG) semiconductor devices specifically made of silicon carbide (SiC). This allows for high switching frequency operation, lower conduction and switching losses, and higher power density. The key design parameters, component selection, and operating principles are analyzed in detail. Simulation results demonstrate high conversion efficiency, reduced switching stress, and stable operation under fast charging conditions, validating the suitability of the LLC topology for high-power electric vehicle charging applications. The proposed system offers a scalable and efficient solution that can contribute to the development of compact, grid-compatible DC fast charging stations, supporting the growing demand for electromobility infrastructure.