In recent years, a wide range of electronic materials with a great diversity in their chemical and physical properties has been patterned by printing techniques on a variety of substrates. Nanotechnology-based materials appear to be the most promising thereof, increasing the resolution of the printed raster and enhancing the electrical properties of the final patterns. Conductive nanoparticle inks are the main building block of all printed electronic devices and circuit boards, forming their fundamental structure and integrated low-resistance circuit interconnects, antennae, contact electrodes within transistors etc. A plethora of both conventional and novel printing techniques have been employed with nanoparticle-based inks for the fabrication of conductive patterns, dictating different limitations for the properties of the printed inks. Although several articles have reviewed printing techniques of nanomaterials, a comprehensive review on physicochemical properties that need to be considered in order to develop nanoparticle-based conductive inks, sufficiently compatible with each printing technique, is missing. This review firstly summarizes a wide range of printing techniques that are of high potential for printing electronics and then narrows them down to those applied with conductive nanoparticle inks. Next, it focuses on the typical properties of nanoparticle-based conductive inks (chemical composition, particle size and shape, solids loading, ink viscosity and surface tension) and suggests parameters that need to be taken into account when preparing conductive nanotechnology-based inks, corresponding the requirements of each printing technique. General principles that determine the electrical conductivity of the printed patterns are outlined. Lastly, future prospects on the development of novel printable materials are laid out.

The current research aimed to examine the thermomechanical properties of new nanocomposites in additive manufacturing (AM). Material extrusion (MEX) 3D printing was utilized to evolve acrylonitrile butadiene styrene (ABS) nanocomposites with silicon nitride nano-inclusions. Regarding the mechanical and thermal response, the fabricated 3D-printed samples were subjected to a course of standard tests, in view to evaluate the influence of the Si₃N₄ nanofiller content in the polymer matrix. The morphology and fractography of the fabricated filaments and samples were examined using scanning electron microscopy and atomic force microscopy. Moreover, Raman and energy dispersive spectroscopy tests were accomplished to evaluate the composition of the matrix polymer and nanomaterials. Silicon nitride nanoparticles were proved to induce a significant mechanical reinforcement in comparison with the polymer matrix without any additives or fillers. The optimal mechanical response was depicted to the grade ABS/Si₃N₄ 4 wt. %. An impressive increase in flexural strength (30.3%) and flexural toughness (47.2%) was found. The results validate that these novel ABS nanocomposites with improved mechanical properties can be promising materials.

The goal of this paper is to investigate tungsten carbide (WC) as a reinforcement in the popular material extrusion (MEX) additive manufacturing (AM) procedure. The impressive characteristics of WC demonstrate its potential as a valuable additive for commonly used polymeric matrices in MEX 3D printing, offering reinforcement and stabilization properties. The mechanical properties of hybrid polymer/ceramic nanocomposites made up of various filler loadings (0–10 wt. %) of medical-grade polylactic acid (PLA) and WC were studied. The mechanical characteristics, structure, and thermomechanical properties of the resulting compounds were fully characterized following the respective standards. The fracture mechanisms were revealed with Scanning Electron Microscopy. Overall, a laborious effort was implemented with fifteen different tests to fully characterize the nanocomposites prepared. In comparison to the raw PLA material, the tensile strength of the 4.0 wt. % WC PLA/WC nanocomposite was improved by 42.5% and the flexural strength by 41.9%. In the microhardness test, a 120.4% improvement was achieved, justifying the properties of WC ceramic. According to these findings, PLA nanocomposites reach high-performance polymer specifications, expanding their potential use, especially in wear-related applications.