Fabian Palacios-Pereira

Mr. Fabian Palacios-Pereira

DIEM, Engineering Faculty - Universidad Nacional de Asuncion, Asunción, Paraguay
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

6 January 2026 in Actuators
Verified
Journal Article
Open access
PDF file
HDHugo Hernán Lezcano Delvalle
Hugo Hernán Lezcano Delvalle
RVRodrigo Nicolas Romero Vega
Rodrigo Nicolas Romero Vega
SASergio Eduardo Núñez Aquino
Sergio Eduardo Núñez Aquino
Bruno SanabriaBruno Sanabria
Bruno Sanabria
Fabian Palacios-PereiraFabian Palacios-Pereira
Fabian Palacios-Pereira
Marco RiveraMarco Rivera
Marco Rivera
Bidirectional switches are highly required power electronics units for the design of power converters, especially for direct matrix converters. This article presents the design and implementation of a compact bidirectional switch based on SiC-MOSFET technology, aimed at high-efficiency, high-density power electronics applications. The proposed architecture employs surface-mount components, optimizing both the occupied area and electrical performance. The selected switching device is the IMBG120R053M2H from Infineon, a SiC-MOSFET known for its low on-resistance, high reverse-voltage blocking capability, and excellent switching speed. To drive the power devices, the UCC21521 gate driver integrates two independent isolated outputs in a single package, enabling precise control and reduced electromagnetic interference (EMI). The developed design supports bidirectional current conduction and voltage blocking, offering a robust and scalable solution for next-generation power converters. Design criteria, simulation results, and experimental validations are discussed.

11 May 2025
Verified
Conference Paper
Closed access
NPNéstor Pérez-Sosa
Néstor Pérez-Sosa
Fabian Palacios-PereiraFabian Palacios-Pereira
Fabian Palacios-Pereira
STSergio Toledo
Sergio Toledo
EMEdgar Maqueda
Edgar Maqueda
DCDavid Caballero
David Caballero
Marco RiveraMarco Rivera
Marco Rivera
This paper presents a novel finite control set modelbased predictive current control strategy of a three-level multimodular Neutral Point Clamped (NPC) converter applied to a three-phase isolated load. The control strategy allows for reducing the steady-state error of the output current of the NPC converter. In addition, the method provides fault tolerance in the absence of one of the NPC modules, making it possible to keep the power delivered to the load constant. The results are presented by comparing the proposed strategy with the classical predictive control applied to the same system. Figures of merit, such as mean square error and total harmonic distortion, are evaluated and finally, the system response to fault tolerance.

3 November 2024
Verified
Conference Paper
Closed access
Fabian Palacios-PereiraFabian Palacios-Pereira
Fabian Palacios-Pereira
NPNestor Perez-Sosa
Nestor Perez-Sosa
STSergio Toledo
Sergio Toledo
EMEdgar Maqueda
Edgar Maqueda
DCDavid Caballero
David Caballero
Marco RiveraMarco Rivera
Marco Rivera
A predictive current control design for a multi-modular indirect matrix converter using a three-level neutral-point clamped for the inverter side is studied. The multi-modular topology is based on two 3-Level Indirect Matrix Converter modules, and the control strategy proposal involves a single model-based predictive current control and the use of a coupled current signal. It is the interaction between the two three-phase output current of each module for error compensation between these, along with the ability to operate in failures. This article shows the results of the simulation in Matlab/Simulink of the 3-level multi-modular indirect matrix converter with coupled control, compared with an independent control for each module of the converter, in order to verify the performance obtained in terms of total harmonic distortion and mean square error. In addition, the analysis was carried out with respect to the behavior in transient, stationary state and with simulated failures for each module. The results obtained support the effectiveness of the control strategy with the proposed topology showing, with the control coupled, a decrease in the mean square error in the current signal of the final load, having a good value of total harmonic distortion and the capacity for optimal operation in the event of failures of the generation or conversion system.

10 September 2026 in Inventions
Verified
Journal Article
Open access
PDF file
Juan José Augusto Galeano-DinataleJuan José Augusto Galeano-Dinatale
Juan José Augusto Galeano-Dinatale
Jorge RodasJorge Rodas
Jorge Rodas
Fabian Palacios-PereiraFabian Palacios-Pereira
Fabian Palacios-Pereira
Larizza DelormeLarizza Delorme
Larizza Delorme
ARAlfredo Renault
Alfredo Renault
Fuel cell systems require high-efficiency DC–DC interfaces capable of regulating rapid voltage variations while respecting the operational constraints of proton-exchange membrane fuel cells (PEMFCs). The floating interleaved boost converter (FIBC) is a strong candidate for this purpose due to its reduced current ripple, improved power sharing, and lower component stress. The design of control strategies for FIBCs supplied by PEMFCs remains challenging because explicitly enforcing fuel cell operational constraints under fast converter dynamics is inherently difficult, particularly when detailed fuel cell models are unavailable or undesirable, as reflected in existing approaches such as classical linear regulators and single-model predictive schemes. Therefore, this paper proposes a multi-model finite control set model-based predictive control (MM-FCS-MPC) strategy for FIBC converters supplied by PEMFCs. The method employs multiple discrete prediction models with cost functions defined by the converter switching mode, integrates a fuel cell-aware reference-generation mechanism to ensure nominal and safe PEMFC operation by enforcing current and power constraints within the predictive framework, and enables fast, accurate output-voltage regulation. Detailed modelling of the FIBC, component sizing, and PEMFC characteristics is provided. Obtained results under load disturbances and reference variations validate the proposed control scheme, demonstrating improved transient dynamics, reduced steady-state error, and enhanced current-sharing performance. Obtained results under load disturbances and reference variations validate the proposed control scheme, demonstrating improved transient dynamics, reduced steady-state error, and enhanced current-sharing performance, with a rise time of approximately 4.4 ms, a ±2% settling time of 10.3 ms, a maximum overshoot of only 0.056%, and a phase delay of approximately 4.26°, compared with 9.6° for the conventional PI voltage-tracking baseline.

28 October 2025
Verified
Conference Paper
Closed access
Fabian Palacios-PereiraFabian Palacios-Pereira
Fabian Palacios-Pereira
MPMarcelo Palma
Marcelo Palma
MAMario Arzamendia
Mario Arzamendia
DGDerlis O. Gregor
Derlis O. Gregor
DPDiego Palacios
Diego Palacios
HLHernán Lezcano
Hernán Lezcano
This paper presents an autonomous, low-power, and scalable vehicle counting and monitoring system, both in terms of network and functionality, that does not depend on a continuous internet connection for its operation. The proposal integrates LoRa communication for long-distance transmission of counting data with high energy efficiency, edge processing using an NVIDIA Jetson Nano running a YOLOv8n-based detection model, and remote feature update capability through the decentralized InterPlanetary File System (IPFS) using hash addressing. The system implements bidirectional data flow over LoRa technology, allowing both the sending of information (counts, measurements) and the receiving of control commands (remote reboots, hash updates). Field evaluations demonstrate the system's ability to detect and classify vehicles in real-time with low latency, maintain low power consumption, and update operational scripts with 100 % success in test scenarios. On average, 8.92 FPS were achieved during inference and a full update deployment time of less than 1.2 minutes, validating the effectiveness, resilience, and functional scalability of this architecture for vehicle monitoring in diverse environments.