Fawad Ahmad

Dr. Fawad Ahmad

DITEN, University of Genoa, Genoa, Liguria, Italy
orcid
Electrical and Electronics Engineer

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2025 in Inventions
Verified
Journal Article
Open access
PDF file
Fawad AhmadFawad Ahmad
Fawad Ahmad
MMMuhammad Yasir Masood Mirza
Muhammad Yasir Masood Mirza
Iftikhar HussainIftikhar Hussain
Iftikhar Hussain
Kaleem ArshidKaleem Arshid
Kaleem Arshid
In recent years, the use of unmanned aerial vehicles (UAVs), commonly known as drones, has significantly surged across civil, military, and commercial sectors. Ensuring reliable and efficient communication between UAVs and between UAVs and base stations is challenging due to dynamic factors such as altitude, mobility, environmental obstacles, and atmospheric conditions, which existing communication models fail to address fully. This paper presents a multi-ray channel model that captures the complexities of the airspace network, applicable to both ground-to-air (G2A) and air-to-air (A2A) communications to ensure reliability and efficiency within the network. The model outperforms conventional line-of-sight assumptions by integrating multiple rays to reflect the multipath transmission of UAVs. The multi-ray channel model considers UAV flights’ dynamic and 3-D nature and the conditions in which UAVs typically operate, including urban, suburban, and rural environments. A technique that calculates the received power at a target UAV within a networked airspace is also proposed, utilizing the reflective characteristics of UAV surfaces along with the multi-ray channel model. The developed multi-ray channel model further facilitates the characterization and performance evaluation of G2A and A2A communications. Additionally, this paper explores the effects of various factors, such as altitude, the number of UAVs, and the spatial separation between them on the power received by the target UAV. The simulation outcomes are validated by empirical data and existing theoretical models, providing comprehensive insight into the proposed channel modelling technique.

24 September 2024 in Electronics
Verified
Journal Article
Open access
PDF file
Armel Asongu NkembiArmel Asongu Nkembi
Armel Asongu Nkembi
Danilo SantoroDanilo Santoro
Danilo Santoro
Fawad AhmadFawad Ahmad
Fawad Ahmad
IKIñigo Kortabarria
Iñigo Kortabarria
Paolo CovaPaolo Cova
Paolo Cova
Nicola DelmonteNicola Delmonte
Nicola Delmonte
This paper proposes a novel feedforward control scheme to achieve a very smooth transition from Constant Current (CC) to Constant Voltage (CV) charging modes, the commonly used method for electric vehicle charging applications. Furthermore, a three-loop model-independent Linear Active Disturbance Rejection Control (LADRC)-based system is proposed, replacing the traditional two-loop Proportional-Integral (PI) control system. The extra loop performs a decoupled dq vector control of the inductor current, which is typically not used in single-phase Dual Active Bridge (DAB) systems. This additional loop not only facilitates the optimal determination of both internal and external phase shift angles of a Dual-Phase Shift (DPS) modulator but also lowers the peak input current of the converter, allowing for lower-rated switches. Numerical simulations using MATLAB/Simulink demonstrate the robustness of the proposed control strategy against both input voltage disturbances and load disturbances during the transition from CC to CV charging modes. Hence, the dynamic performance of the charging system is significantly improved with minimal controller effort.

17 October 2024 in Energies
Verified
Journal Article
Open access
PDF file
Armel Asongu NkembiArmel Asongu Nkembi
Armel Asongu Nkembi
Danilo SantoroDanilo Santoro
Danilo Santoro
Fawad AhmadFawad Ahmad
Fawad Ahmad
IKIñigo Kortabarria
Iñigo Kortabarria
Paolo CovaPaolo Cova
Paolo Cova
Nicola DelmonteNicola Delmonte
Nicola Delmonte
Electric vehicles (EVs) are rapidly replacing fossil-fuel-powered vehicles, creating a need for a fast-charging infrastructure that is crucial for their widespread adoption. This research addresses this challenge by improving the control of dual active bridge converters, a popular choice for high-power EV charging stations. A critical issue in EV battery charging is the smooth transition between charging stages (constant current and constant voltage) which can disrupt converter performance. This work proposes a novel feedforward control method using a combination of droop-based techniques combined with a sophisticated linear active disturbance rejection control system applied to a single-phase shift-modulated dual active bridge. This combination ensures a seamless transition between charging stages and enhances the robustness of the system against fluctuations in both input voltage and load. Numerical simulations using MATLAB/Simulink R2024a demonstrated that this approach not only enables smooth charging but also reduces the peak input converter current, allowing for the use of lower-rated components in the converter design. This translates to potentially lower costs for building these essential charging stations and faster adoption of EVs.

19 June 2024
Verified
Conference Paper
Closed access
Fawad AhmadFawad Ahmad
Fawad Ahmad
FPFederico Portesine
Federico Portesine
MAMarco Ashero
Marco Ashero
MMMario Marchesoni
Mario Marchesoni
LVLuis Vaccaro
Luis Vaccaro
Diodes are known as a critical component in power electronics and industrial applications due to their ability to handle high voltages and currents. To optimize their design for high-voltage and high current operations, it is important to ensure their reliability, especially with regard to thermal aspects. In this article, simulations were performed to investigate the thermal resistance and transient thermal impedance of a diode with blocking voltage of 2800 V and a diameter of 46 mm copper pole by electrothermal modeling. Thermal parameters such as resistance and capacitance are calculated and an electrical equivalent circuit, the Cauer thermal network, is developed in PSIM. Furthermore, the Cauer model is transformed into a Foster model. Curve fitting method is used to extract thermal parameters from the thermal impedance curves through non-linear regression in MATLAB®. Using the derived resistance and time constants in Foster network, average current of a device may be predicted at different pulse durations and shapes. Moreover, experimental measurements were carried out to validate the thermal resistance for the investigated diode. Finally, a comparison with analytical curve also confirms the effectiveness of the approach.

12 December 2025 in Electronics
Verified
Journal Article
Open access
PDF file
Fawad AhmadFawad Ahmad
Fawad Ahmad
Luis VaccaroLuis Vaccaro
Luis Vaccaro
Armel Asongu NkembiArmel Asongu Nkembi
Armel Asongu Nkembi
Mario MarchesoniMario Marchesoni
Mario Marchesoni
FPFederico Portesine
Federico Portesine
In recent years, the use of high-power semiconductor devices has seen growing demand across various applications, including data centers, electric vehicles, and traction systems. However, increasing power densities may increase challenges in ensuring the reliability of devices, particularly under high surge currents. These surge events may result in excessive power dissipation and rapid temperature increases, leading to device performance degradation and potential failure. Therefore, accurate temperature estimation is critical. However, existing approaches in the literature are mostly oversimplified and constrained by static I–V characteristics, limiting their accuracy. To encounter these limitations, this article proposes a forward-voltage-based temperature evaluation methodology for high-power diodes subjected to 10 ms surge events. The proposed model integrates rated electrical parameters with thermal simulation data to enable the accurate estimation of dynamic slope resistance and forward voltage during transient surge operation. The proposed framework shows strong agreement with the experimental results and provides a reliable tool for surge capability assessment. This approach enhances device modeling accuracy under very-high-current stress and offers valuable insights for electro-thermal design and thermal management in next-generation power semiconductor devices.

26 December 2025 in Electronics
Verified
Journal Article
Open access
PDF file
Fawad AhmadFawad Ahmad
Fawad Ahmad
Luis VaccaroLuis Vaccaro
Luis Vaccaro
Armel Asongu NkembiArmel Asongu Nkembi
Armel Asongu Nkembi
Mario MarchesoniMario Marchesoni
Mario Marchesoni
FPFederico Portesine
Federico Portesine
GAGiulio Emenike Anyanwu
Giulio Emenike Anyanwu
Junction temperature is considered a critical parameter that can directly affect the reliability and power handling capabilities of semiconductor devices. Effective thermal management, particularly under high-surge-current conditions, is therefore essential to maintain a lower junction temperature in order to enhance device performance and prevent device failure. Among various thermal management strategies, packaging technology plays an important role in optimizing junction temperature and enhancing the robustness of the device. In this article, a comparative analysis of high-power diodes is performed by investigating their junction temperature behavior and surge current handling capability. Moreover, an insulated module diode and a press-pack diode with pressure contact technology (PCT), both with identical specifications and power ratings, are selected for analysis. A 10 ms half-sine surge current waveform generator is developed both experimentally and in simulations to replicate realistic surge events. Experimental measurements of the forward voltage drop across varying surge levels are used to analyze device failure behavior. In addition, electro-thermal simulations are also employed in PSIM 2025.0 software to estimate and compare the temperature. Furthermore, this study enables practical insights into device thermal performance, robustness, and surge current handling capabilities, enabling a performance comparison between the two packaging technologies.