Additive manufacturing encompasses technologies that produce three-dimensional computer-aided design (CAD) models through a layer-by-layer production process. Compared to traditional manufacturing methods, additive manufacturing technologies offer significant advantages in producing intricate components with minimal energy consumption, reduced raw material waste, and shortened production timelines. AM methods based on shielded gas welding have recently piqued the interest of researchers due to their high efficiency and cost-effectiveness in manufacturing critical components. However, one of the most formidable challenges in additive manufacturing methods based on shielded gas welding lies in the irregularity of weld bead height at different points, compromising the precision of components produced using these techniques. In this current research, we aimed to achieve uniform weld heights along the welding path by considering the most influential parameters on weld bead geometry and conducting experimental tests. Input parameters of the process, including nozzle angle, welding speed, wire speed, and voltage, were considered. Simultaneously, image processing and wavelet transform were employed to assess the uniformity of weld bead height. These parameters were applied to produce intricate parts after identifying optimal parameters that yielded the smoothest weld lines. According to the results, the appropriate bead for manufacturing the part was extracted. The results show that the smoothest bead line is achieved in 27 V as the highest level of voltage, at a 90° nozzle position and the maximum wire feed rate. Parts manufactured using this method across different layers exhibited no distortions, and the repeatability of production substantiated the high reliability of this approach for component manufacturing.
Additive Manufacturing describes the technologies that can produce a physical model out of a computer model with a layer-by-layer production process. Additive Manufacturing technologies, as compared to traditional manufacturing methods, have the high capability of manufacturing the complex components using minimum energy and minimum consumption. These technologies have brought about the possibility to make small pieces of raw materials in the shortest possible time without the need for a mold or tool. One of the technologies used to make pieces of the layer-by-layer process is the Gas Metal Arc Welding (GMAW). One of the basic steps in this method of making parts is the prediction of bead geometry in each pass of welding. In this study, taking into account the effective parameters on the geometry of weld bead, an empirical study has been done in this field. For this purpose, three parameters of voltage, welding speed and wire feeding rate are considered as effective parameters on the welding geometry of the process. Width and height of the bead are also determined by the parameters of the geometry of the weld according to the type and application of the research as output parameters are considered. In this paper, an adaptive neuro-fuzzy inference system (ANFIS) is used to create an adaptive model between input process data and parameters of weld bead geometry. The least squares mean error is used to evaluate the model. The predicted results by the model have a good correlation with the experimental data.
2 December 2025 in The International Journal of Advanced Manufacturing Technology