Francisco Veiga Simão

Dr. Francisco Veiga Simão

Executive Director, Pampilhosa Business Center - Municipality of Pampilhosa da Serra, Coimbra, Portugal
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 November 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
NMNatalia Pires Martins
Natalia Pires Martins
SSSumit Srivastava
Sumit Srivastava
Francisco Veiga SimãoFrancisco Veiga Simão
Francisco Veiga Simão
HNHe Niu
He Niu
PPPriyadharshini Perumal
Priyadharshini Perumal
GHGuillaume Habert
Guillaume Habert
Medium and highly sulfidic tailings are high-volume wastes that can lead to severe environmental damage if not properly managed. Due to the high content of sulfide minerals, these tailings can undergo weathering if put in contact with oxygen and water, generating acid mine drainage (AMD). The moderate-to-high sulfide content is also an important technical limitation for their implementation in the production of construction materials. This paper reviews the use of sulfidic tailings as raw material in construction products, with a focus on cement, concrete, and ceramics. When used as aggregates in concrete, this can lead to concrete degradation by internal sulfate attack. In building ceramics, their implementation without prior treatment is undesirable due to the formation of black reduction core, efflorescence, SOx emissions, and their associated costs. Moreover, their intrinsic low reactivity represents a barrier for their use as supplementary cementitious materials (SCMs) and as precursors for alkali-activated materials (AAMs). Nevertheless, the production of calcium sulfoaluminate (CSA) cement can be a suitable path for the valorization of medium and highly sulfidic tailings. Otherwise difficult to upcycle, sulfidic tailings could be used in the clinker raw meal as an alternative raw material. Not only the SO3 and SiO2-rich bulk material is incorporated into reactive clinker phases, but also some minor constituents in the tailings may contribute to the production of such low-CO2 cements at lower temperatures. Nevertheless, this valorization route remains poorly explored and demands further research.

20 December 2019 in Scientific Reports
Verified
Journal Article
Open access
PDF file
ACAna Paula Chung
Ana Paula Chung
CCCarina Coimbra
Carina Coimbra
PFPedro Farias
Pedro Farias
RFRomeu Miranda Francisco
Romeu Miranda Francisco
RBRita Branco
Rita Branco
Paula V MoraisPaula V Morais
Paula V Morais
In a circular economy concept, where more than 300 million tons of mining and quarrying wastes are produced annually, those are valuable resources, supplying metals that are extracted today by other processes, if innovative methods and processes for efficient extraction of these elements are applied. This work aims to assess microbiological and chemical spatial distribution within two tailing basins from a tungsten mine, using a MiSeq approach targeting the 16S rRNA gene, to relate microbial composition and function with chemical variability, thus, providing information to enhance the efficiency of the exploitation of these secondary sources. The tailings sediments core microbiome comprised members of family Anaerolineacea and genera Acinetobacter, Bacillus, Cellulomonas, Pseudomonas, Streptococcus and Rothia, despite marked differences in tailings physicochemical properties. The higher contents of Al and K shaped the community of Basin 1, while As-S-Fe contents were correlated with the microbiome composition of Basin 2. The predicted metabolic functions of the microbiome were rich in genes related to metabolism pathways and environmental information processing pathways. An in-depth understanding of the tailings microbiome and its metabolic capabilities can provide a direction for the management of tailings disposal sites and maximize their potential as secondary resources.

13 July 2022 in Journal of Cleaner Production
Verified
Journal Article
Closed access
Francisco Veiga SimãoFrancisco Veiga Simão
Francisco Veiga Simão
HCHilde Chambart
Hilde Chambart
LVLaure Vandemeulebroeke
Laure Vandemeulebroeke
PNPeter Nielsen
Peter Nielsen
LALugas Raka Adrianto
Lugas Raka Adrianto
VCValérie Cappuyns
Valérie Cappuyns

18 October 2021 in Journal of Sustainable Metallurgy
Verified
Journal Article
Closed access
PDF file
Francisco Veiga SimãoFrancisco Veiga Simão
Francisco Veiga Simão
HCHilde Chambart
Hilde Chambart
LVLaure Vandemeulebroeke
Laure Vandemeulebroeke
PNPeter Nielsen
Peter Nielsen
VCValérie Cappuyns
Valérie Cappuyns

4 March 2021
Verified
Other
Open access
Francisco Veiga SimãoFrancisco Veiga Simão
Francisco Veiga Simão
HCHilde Chambart
Hilde Chambart
LVLaure Vandemeulebroeke
Laure Vandemeulebroeke
PNPeter Nielsen
Peter Nielsen
VCValérie Cappuyns
Valérie Cappuyns
Mining and quarrying waste is considered the second largest waste stream in Europe. According to Eurostat, in 2018, this extractive waste accounted for over a quarter of all the EU-27 waste output (26.2%). The accumulation of this type of waste in tailing dams or waste rock piles, with no end-use, can pose as a significant environmental and health hazard as well as a resource loss. Sulphidic mine waste processing residues (tailings) pose a large challenge, as their content in hazardous metalloids and sulphates tend to become more chemically available, leading to the generation of acid mine drainage. Apart from the hazardous metalloids and sulphates, these mine tailings contain valuable base, precious and critical metals which can be used in different technological applications. Moreover, silicates and clay minerals are amongst the most common and abundant minerals in sulphidic mine tailings, which indicates that after pre-treatment, if necessary, they can be used in different ceramic building applications (e.g. roof tiles and blocks) for an increasing world’s population.Plombières Zn-Pb inactive mine (Eastern Belgium), was exploiting an ore deposit between 1844-1882 and after closure of the mine, imported ores were smelted at the Plombières site until 1922. The dumped material from the mining operations consist of mainly mine waste and metallurgical waste, such as tailings and slags, from the processing plants. The goal of the present study is to evaluate the potential use of (uncleaned) Plombières tailing material in 3 different ceramic products (roof tiles, blocks and pavers), with different compositions and firing temperatures, taking into account production parameters, product quality and environmental compliance in Flanders (Belgium).After a detailed physical, mineralogical, chemical, thermal and environmental characterisation of the Plombières mine tailing material, as well as of the replaced raw materials, one company-specific blend has been modified on a lab scale for each ceramic product, by partly or totally replacing some primary raw materials (mainly clay and sand) by 5%, 10% and 20% of Plombières fine tailing material. The shaping, drying and firing behaviour of lab test pieces was assessed and compared to the standard, as well as the required technical, aesthetical and chemical properties of each ceramic product. Furthermore, environmental compliance tests (column leaching test) were performed on the fired test pieces of all the ceramic products. The column leaching test is performed considering a 2nd life scenario where shaped building products are demolished and can be recycled as granulates (non-shaped building products).

21 June 2024
Verified
Journal Article
Closed access
BNBianca Derya Neumann
Bianca Derya Neumann
GSGhadi Sabra
Ghadi Sabra
DWDhruv Warrior
Dhruv Warrior
Francisco Veiga SimãoFrancisco Veiga Simão
Francisco Veiga Simão