Gabriele Patrizi

Dr. Gabriele Patrizi

University of Florence, Department of Information Engineering
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 September 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
MCMarcantonio Catelani
Marcantonio Catelani
LCLorenzo Ciani
Lorenzo Ciani
Romano FantacciRomano Fantacci
Romano Fantacci
Gabriele PatriziGabriele Patrizi
Gabriele Patrizi
BPBenedetta Picano
Benedetta Picano
Prognostic and Condition-based Maintenance of Lithium-Ion batteries is a fundamental topic which is rapidly expanding since a long battery lifetime is required to ensure economic viability and minimize the life cycle cost. Remaining Useful Life (RUL) estimation is an essential tool for Prognostic and Health Management of batteries. In this paper a hybrid approach based on both condition monitoring and physic model is presented to improve the accuracy and precision of RUL estimation for Lithium-Ion battery. An Artificial Intelligence estimation method based on Recurrent Neural Network (RNN) is integrated with a state space estimation technique which is typical of filtering-based approach. The state space estimation is used to generate a big dataset for the training of the RNN. Some additional deep layers are used to improve the prediction of nonlinear trends (typical of batteries) while the performance optimization of the RNN is ensured using a genetic algorithm. The performances of the proposed method have been tested using a battery degradation dataset from the data repository of Prognostics Center of Excellence at NASA. Two different degradation models are compared, the widely known empirical double exponential model and an innovative single exponential model which allows to ensure optimal performance with fewer parameters required to be estimated.

4 August 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Open access
Gabriele PatriziGabriele Patrizi
Gabriele Patrizi
ABAlessandro Bartolini
Alessandro Bartolini
LCLorenzo Ciani
Lorenzo Ciani
Vincenzo GalloVincenzo Gallo
Vincenzo Gallo
PSPaolo Sommella
Paolo Sommella
Marco CarratùMarco Carratù
Marco Carratù
Precision farming technologies refer to a set of cutting-edge tools and strategies implemented to optimize the management of the plantation. Smart meter devices, IoT technologies, and Wireless Sensor Networks are only a few examples of the innovative systems increasingly employed from an Agriculture 4.0 point of view. Recent literature has paid close attention to the role of Artificial Intelligence (AI) and Deep Learning (DL) algorithms in helping farmers and improving soil productivity. In this regard, this paper presents the design of a Wireless Sensor Network based on low-cost, low-power PV-supplied sensor nodes able to acquire data regarding environmental conditions and soil parameters. Among all the implemented sensors, the most critical is the soil moisture sensors because of many issues related to cost, installation, reliability, and calibration. Thus, this paper proposes a deep learning approach based on Long Short-Term Memory (LSTM) networks to provide a virtual soil moisture sensor using only the data acquired by the other transducer installed on the node. Performances estimation of the virtual sensors and an in-depth comparison with other learning-based approaches have been presented in this paper to validate the effectiveness of the proposed soft sensing approach.

25 September 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Open access
Marco CarratùMarco Carratù
Marco Carratù
Vincenzo GalloVincenzo Gallo
Vincenzo Gallo
SISalvatore Dello Iacono
Salvatore Dello Iacono
PSPaolo Sommella
Paolo Sommella
ABAlessandro Bartolini
Alessandro Bartolini
Gabriele PatriziGabriele Patrizi
Gabriele Patrizi
The recent development of highly automated machinery and intelligent industrial plants has increasingly enabled the continuous monitoring of their efficiency and condition, with the aim of maintaining high production efficiency and minimal malfunctions. Typical condition monitoring and fault detection applications are often achieved using acoustic and vibrational techniques, but the availability of distributed electrical measurements opens new opportunities for industrial fault detection with minimal impact on electrical systems. Even if artificial intelligence-based approaches can be used to model industrial equipment by means of measures made on electrical systems to which they are connected, machine learning algorithms have been demonstrated to be particularly adequate for this purpose due to the huge amount of data produced by interconnected sensors and devices. In this context, the aim of this work is to propose a new unsupervised analysis methodology for detecting anomalies in industrial machinery using electrical current values and other parameters measured on the power grid. The proposed framework is aimed at incorporating the advantages of Machine Learning algorithms and those of traditional analysis, optimizing their operation to improve performance and execution time; this also incorporates a methodology for analyzing the temporal dynamics of the anomaly based on Short-time Fourier transform to strengthen the performance of the detection. The results obtained showed excellent performance, both compared to the evaluations of a technical expert and to other methodologies used in the literature, with zero false positives detected in all datasets tested and a negligible number of undetected outlier events, less than 4% of the total in the datasets.

20 January 2020 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
MCMarcantonio Catelani
Marcantonio Catelani
LCLorenzo Ciani
Lorenzo Ciani
DGDiego Galar
Diego Galar
Gabriele PatriziGabriele Patrizi
Gabriele Patrizi
System downtime and unplanned outages massively affect plant productivity, therefore RAMS (Reliability, Availability, Maintainability and Safety) disciplines, together with fault diagnosis and condition monitoring, are mandatory in energy applications. This paper focuses on the optimization of a maintenance plan for a yaw system used in an on-shore wind turbine. A complete Reliability Centered Maintenance procedure is applied to the system to identify which maintenance action is the optimal solution in terms of cost, safety, and availability. The scope of the research is to propose a new customized decision-making diagram inside the reliability centered maintenance assessment to reduce the subjectivity of the procedure proposed in the standard and saving cost by optimizing maintenance decisions making the projects more cost-efficient and cost-effective. The paper concludes by proposing a new diagnostic method based on a datadriven condition monitoring system to efficiently monitor the health and detect damages in the wind turbine by means of measurements of critical parameters of the tested system. The paper highlights how a reliability analysis during the early phase of the design is a very helpful and powerful means to guide the maintenance decision and the data-driven condition monitoring.

11 July 2019 in IEEE Access
Verified
Journal Article
Open access
LCLorenzo Ciani
Lorenzo Ciani
GGGiulia Guidi
Giulia Guidi
Gabriele PatriziGabriele Patrizi
Gabriele Patrizi
Risk priority number (RPN) is a widely used approach, and it is a powerful means to assess the criticality of modes in a failure modes, effects, and criticality analysis (FMECA) worksheet. In the application of the traditional FMECA, the RPN is determined to rank the failure modes; however, the method has been criticized several times for having many drawbacks and weaknesses, such as the presence of gaps in the range of admissible values, the duplicates value provided by different combinations of the base factors, and the high sensitivity to small changes. This paper analyses and compares some alternative RPN formulation proposed in the literature to overcome these limits. This paper takes into account only the alternative RPN, which proposes a powerful solution without increasing the computational complexity and remaining coherent to the classical idea included in the international standard IEC 60812. In order to compare the advantages and disadvantages of these alternative RPNs, an FMECA was developed for a heating, ventilation, and air condition (HVAC) system in railway application. The critical analysis of the comparison can provide recommendations and suggestions regarding the choice of the alternative RPN based on the type of application. Finally, this paper takes into account the scales reduction of possible values related to the parameters (i.e., occurrence, severity, and detection), which influence the assessment of the RPN. This approach allows the designers to mitigate the drawbacks related to the full scale and provide an easier and faster assessment of the scores to evaluate the criticality analysis and prioritization.

2 May 2021 in Sensors
Verified
Journal Article
Open access
PDF file
MHMatti Hämäläinen
Matti Hämäläinen
Lorenzo MucchiLorenzo Mucchi
Lorenzo Mucchi
Stefano CaputoStefano Caputo
Stefano Caputo
Lorenzo BiottiLorenzo Biotti
Lorenzo Biotti
LCLorenzo Ciani
Lorenzo Ciani
Gabriele PatriziGabriele Patrizi
Gabriele Patrizi
In this paper, we propose an unobtrusive method and architecture for monitoring a person’s presence and collecting his/her health-related parameters simultaneously in a home environment. The system is based on using a single ultra-wideband (UWB) impulse-radar as a sensing device. Using UWB radars, we aim to recognize a person and some preselected movements without camera-type monitoring. Via the experimental work, we have also demonstrated that, by using a UWB signal, it is possible to detect small chest movements remotely to recognize coughing, for example. In addition, based on statistical data analysis, a person’s posture in a room can be recognized in a steady situation. In addition, we implemented a machine learning technique (k-nearest neighbour) to automatically classify a static posture using UWB radar data. Skewness, kurtosis and received power are used in posture classification during the postprocessing. The classification accuracy achieved is more than 99%. In this paper, we also present reliability and fault tolerance analyses for three kinds of UWB radar network architectures to point out the weakest item in the installation. This information is highly important in the system’s implementation.