Gabriel Gomez Ruiz

Mr. Gabriel Gomez Ruiz

CITES, University of Huelva, Huelva, Andalusia, Spain
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 November 2021 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Reyes Sanchez-HerreraReyes Sanchez-Herrera
Reyes Sanchez-Herrera
JAJosé Manuel Andújar
José Manuel Andújar
MMMarco Marquez
Marco Marquez
AMAndres Mejias
Andres Mejias
GRGabriel Gomez Ruiz
Gabriel Gomez Ruiz
A phase-locked loop or phase lock loop (PLL) is, essentially, a closed loop control system, where its output signal (regulated) maintains a direct (chosen) relationship to the input signal (unregulated). If the phases of the input and output signals remain the same, their frequencies will also match. In its usual way, a PLL is an electronic circuit with filters and controllers that must be tuned each time, according to the input signal parameters. As a contribution and novelty, this paper introduces a new, easy, fast and highly efficient PLL algorithm, that it does not need to adjust every time the input signal changes. This makes it independent of the input signal it receives and, therefore, and in a certain way, universally applicable. In addition, the proposal is implemented exclusively by software, housed in a microcontroller, which also represents another novelty. As another remarkable feature, the proposed algorithm is very simple, with a very low computational cost, which makes it very stable, practically insensitive to noise, and very fast. These characteristics and the performance shown over a wide range of input signal frequencies, make the proposed algorithm suitable for use in different applications, from the electricity grid synchronization to the demodulation of frequency modulation, DC motor drives, etc. In addition to frequency and phase tracking, the developed algorithm generates the signal corresponding to the fundamental frequency of the input signal. Furthermore, the algorithm behavior is not affected by the input signal distortion and is independent of its initial phase. The performance and excellent behavior of the developed algorithm are evaluated through simulations and experimental tests.

24 January 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
GRGabriel Gomez Ruiz
Gabriel Gomez Ruiz
Reyes Sanchez-HerreraReyes Sanchez-Herrera
Reyes Sanchez-Herrera
JAJosé Manuel Andújar
José Manuel Andújar
JRJuan Luis Rubio
Juan Luis Rubio
Thermostatically controlled loads have great potential to make a significant contribution to improving energy efficiency in the building sector, which is responsible for 40% of greenhouse gas emissions in the EU. This, in addition to the environmental damage, represents a huge expense in terms of the electricity bill. Therefore, it is very important to train engineers on how to design energy management systems for TCLs. With this goal in mind, it would be very useful to have a simulation-based educational tool (SBET) to understand thermostatically controlled loads, their characteristics, and the possibilities in terms of energy efficiency. In addition, it would be very useful if this tool could be introduced in engineering curricula to help students become better trained and enter the labor market with more opportunities. Based on the shortcomings detected, this work develops an SBET specifically designed to teach on the subject of TCLs (SBET-TCLs), both about their intrinsic characteristics and their better management. To verify the developed SBET-TCLs, it was tested in a real scenario: a survey was carried out among the students of the subject ‘Alternative Energy Sources’ in the degrees of Industrial Engineering. The results show that the use of an SBET-TCLs has very positive effects on the learning process.

18 June 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Jesús Clavijo-CamachoJesús Clavijo-Camacho
Jesús Clavijo-Camacho
GRGabriel Gomez Ruiz
Gabriel Gomez Ruiz
Reyes Sanchez-HerreraReyes Sanchez-Herrera
Reyes Sanchez-Herrera
NMNicolás Magro
Nicolás Magro
This paper presents a real-time remote-control platform for small wind turbines (SWTs) equipped with a permanent magnet synchronous generator (PMSG). The proposed system integrates a DC–DC boost converter controlled by an Arduino® microcontroller, a Raspberry Pi® hosting a WebSocket server, and a desktop application developed using MATLAB® App Designer (version R2024b). The platform enables seamless remote monitoring and control by allowing upper layers to select the turbine’s operating mode—either Maximum Power Point Tracking (MPPT) or Power Curtailment—based on real-time wind speed data transmitted via the WebSocket protocol. The communication architecture follows the IEC 61400-25 standard for wind power system communication, ensuring reliable and standardized data exchange. Experimental results demonstrate high accuracy in controlling the turbine’s operating points. The platform offers a user-friendly interface for real-time decision-making while ensuring robust and efficient system performance. This study highlights the potential of combining open-source hardware and software technologies to optimize SWT operations and improve their integration into distributed renewable energy systems. The proposed solution addresses the growing demand for cost-effective, flexible, and remote-control technologies in small-scale renewable energy applications.

11 October 2024 in Electronics
Verified
Journal Article
Open access
PDF file
GRGabriel Gomez Ruiz
Gabriel Gomez Ruiz
Reyes Sanchez-HerreraReyes Sanchez-Herrera
Reyes Sanchez-Herrera
Jesús Clavijo-CamachoJesús Clavijo-Camacho
Jesús Clavijo-Camacho
JCJuan Maria Diaz Cano
Juan Maria Diaz Cano
F. J. Ruiz-RodriguezF. J. Ruiz-Rodriguez
F. J. Ruiz-Rodriguez
JAJosé Manuel Andújar
José Manuel Andújar
Advancing decarbonization critically depends on the integration of PV systems into microgrids. However, this integration faces challenges, including the variability of photovoltaic solar energy production, the demands of energy management, and the complexities of grid synchronization and communication. To address these challenges, a PV emulator platform is an essential tool. This paper presents a novel four-layer PV emulator platform that seamlessly integrates power systems, control systems, measurement instrumentation, and communication processes. The proposed platform enables the emulation of I-V curves and the dynamic adjustment of operating points—including both the maximum power point (MPP) and power reserve point (PRP)—as well as temperature and irradiance while providing sufficient power capacity for microgrid integration. To validate its effectiveness, the platform was assessed for its capability to adjust operating points, such as MPPs or PRPs, under varying irradiance and temperature conditions. The results show that the platform effectively adjusts operating points with a deviation of less than 5% from theoretical values and successfully tracks a sequence of operating points. This performance underscores the platform’s potential in integrating and managing PV systems within microgrid environments, thereby advancing the path to decarbonization.

30 August 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GRGabriel Gomez Ruiz
Gabriel Gomez Ruiz
Reyes Sanchez-HerreraReyes Sanchez-Herrera
Reyes Sanchez-Herrera
AMAranzazu Delgado Martin
Aranzazu Delgado Martin
JAJosé Manuel Andújar
José Manuel Andújar
An electrical measurement network designed for analyzing power quality within microgrids is presented in this paper. It is very portable and easy to install across various types of microgrids. Data collected by the system meet the standards for measuring electrical parameters, calculating waveforms spectra and comparing results from different microgrid nodes. The measurements provided by the network are useful for both utility and consumer sides. The system’s effectiveness is verified through two experimental setups, specifically built ad hoc: one for testing the accuracy of the measurements obtained and the other for assessing the suitability of these measurements for power quality analysis.

24 May 2024 in Energies
Verified
Journal Article
Open access
PDF file
Reyes Sanchez-HerreraReyes Sanchez-Herrera
Reyes Sanchez-Herrera
Jesús Clavijo-CamachoJesús Clavijo-Camacho
Jesús Clavijo-Camacho
GRGabriel Gomez Ruiz
Gabriel Gomez Ruiz
JVJesus R. Vázquez
Jesus R. Vázquez
Electric power quality is becoming more critical with time because of the increasing use of electronic devices in all areas of society: in industry, in the household, etc. Many kinds of disturbances can be produced in the grid due to external or internal causes, such as, for example, switching operations. Among them, distortion and imbalance are long-term disturbances, which makes them very dangerous for electric equipment. In addition, the identification of the distortion and/or imbalance sources is quite difficult because they are instantaneously scattered by the grid. This paper presents a study of the algorithms published in the technical literature which identify distortion and imbalance sources in electrical installations and compares the results of applying them to a specific installation constituted by linear and non-linear, balanced and unbalanced loads, and a standard module to inject energy to the grid. Only two algorithms have been found in the review carried out and the results provided by both are presented and discussed. Neither of these algorithms is completely reliable, although one of them is more promising.