Gabriella Rossi

Dr. Gabriella Rossi

ENEA - Department of Energy Technologies and Renewable Energy Sources
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 September 2021 in Energies
Verified
Journal Article
Open access
PDF file
SESalvatore Esposito
Salvatore Esposito
ADAntonio D'Angelo
Antonio D'Angelo
CDClaudia Diletto
Claudia Diletto
AGAntonio Guglielmo
Antonio Guglielmo
MLMichela Lanchi
Michela Lanchi
Gabriella RossiGabriella Rossi
Gabriella Rossi
The manufacturing of thermally stable solar coatings with high photo-thermal performance represents a key factor for the further deployment of the CSP technology. Since 2005, ENEA has been developing solar coatings suitable for medium and high temperature applications based on the technology of double nitride cermet, by employing silver and tungsten as infrared reflectors, respectively. Thanks to the high infrared reflectance of silver, the corresponding coatings have better optical performance than those with tungsten; however, the high diffusivity of silver compromises its use at high temperature. In order to improve the structural and chemical stability at medium and high temperature of coatings based on silver, this infrared reflector was placed between compact and uniform layers of metal and cermet manufactured by using high-energy and fast deposition processes. In particular, an Unbalanced Magnetron cathode was adopted to promote an ion-assisted deposition process that improved uniformity and compactness of the metal and cermet films. The new coating shows no photo-thermal parameters degradation after 25 years of service at the operating temperature of 400 °C, while its photo-thermal conversion efficiency decreases by only 1.5% after 25 years of service at an operating temperature of 514 °C.

3 February 2019 in Polymers
Verified
Journal Article
Open access
PDF file
Paola ScarfatoPaola Scarfato
Paola Scarfato
SNSchiavone Nicola
Schiavone Nicola
Gabriella RossiGabriella Rossi
Gabriella Rossi
LILoredana Incarnato
Loredana Incarnato
Inorganic–organic multilayer films consisting of polymers coated with thin inorganic oxidic layers (e.g., SiOx) ensure very high barrier performances against gas and vapor permeation, what makes them packaging materials suitable for sophisticated technical applications, including the encapsulation of photovoltaic devices or quantum dots, barrier films for optical displays, and transparent greenhouse screens. In these fields, surface coating or texturing of the multilayer protective films are effective technologies to improve their self-clean ability, thus reducing the required maintenance and ensuring longer durability and better performances. In this work, we used the self-assembled monolayer (SAM) technique to modify the surface and wetting properties of commercial polyethylene terephthalate-silicon oxide substrate (PET-SiOx) films developed for technical applications requiring a combined high barrier and transparency. The selected surface modifier was the 1H,1H,2H,2H-per-fluorodecyltrichlorosilane (FDTS). The reagent mixture composition was optimized for the lowest water and oil wettability, as well as the highest self-cleaning capacity and performance stability. In particular, for the used PET-SiOx film the best FDTS/film surface for both the lowest water and oil wettability was found to be equal to 26.5 mM/dm2, which changes the surface behavior from very hydrophilic (static water contact angle (CAw) = 21.5°) to hydrophobic (CAw = 101°), and gives a significant increment of the static oil contact angle (CAo) from 27° to 60°. Interestingly, the results demonstrated that the SAM reaction occurred also on the uncoated the PET side. After the SAM treatment, a small increase of the water vapor permeability is observed, probably due to a crack or defect onset of the SiOx coating of the SAM modified films. On this point, atomic force measurements demonstrated an increment of the SiOx coating layer roughness after the SAM treatment execution. Finally, the transparency changes of the SAM treated films, measured in the wavelength range 400–800 nm, were always small, so that the results were acceptable for the films’ use in applications where high transparency is required.

12 February 2025 in Energies
Verified
Journal Article
Open access
PDF file
SESalvatore Esposito
Salvatore Esposito
ADAntonio D'Angelo
Antonio D'Angelo
CDClaudia Diletto
Claudia Diletto
Gabriella RossiGabriella Rossi
Gabriella Rossi
RVRaffaele Volpe
Raffaele Volpe
MLMichela Lanchi
Michela Lanchi
The present work introduces a new solar selective absorber coating (SSAC) for the receiver tube of Concentrated Solar Power (CSP) systems, proposing silver as an infrared reflector for application at 550 °C. In the past, the Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA) has developed SSACs suitable for applications at 550 °C, featuring solar absorbers based on graded multilayer cermet of WN-AlN and W-Al2O3 and an infrared reflector of tungsten. Although these coatings ensured properly stable photothermal performance at 550 °C, due to the low tungsten diffusivity, their hemispherical emittance could be reduced by using metals with higher reflectance in the infrared region, like silver. However, the high diffusivity of silver compromises its use at high temperatures. This last drawback has been addressed by foreseeing two stabilizing layers enclosing the Ag infrared reflector. One W stabilizing layer was placed between the substrate and the Ag infrared reflector, whereas a second stabilizing layer, selected among aluminum nitride deposited with a low and high nitrogen flow and aluminum oxide deposited at a low oxygen flow, was placed between the Ag infrared reflector and the solar absorber. Accelerated aging tests revealed a negligible (not detectable) degradation of the solar absorptance for the new SSACs. Furthermore, the hemispherical emittance at 550 °C increased by 0.75% and 0.42% for solar coatings with aluminum nitride stabilizing layers deposited through a high and low nitrogen flow, respectively. Differently, the increase was evaluated as being equal to 0.08% for the solar coating with an aluminum oxide stabilizing layer deposited through a low oxygen flow. The manufactured solar coating with a stabilizing layer of aluminum nitride deposited with a low nitrogen flow exhibited a solar absorptance of 95%, comparable to ENEA coatings incorporating a W infrared reflector for applications at 550 °C, whereas the estimated hemispherical emittance at 550 °C was 2% lower than that of the best ENEA coating with a W infrared reflector for the same temperature.

30 January 2016 in Applied Nanoscience
Verified
Journal Article
Open access
PDF file
Gabriella RossiGabriella Rossi
Gabriella Rossi
PCPiera Castellano
Piera Castellano
LILoredana Incarnato
Loredana Incarnato
A method was developed for generating transparent and hydrophobic nanolayers chemisorbed onto flexible substrates of ethylene tetrafluoroethylene–silicon oxide (ETFE–SiOx). In particular, the effect of the deposition time and of the precursor molecule on the nanocoating process was analyzed with the aim of pursuing an optimization of the above method in an industrial application perspective. It was found that precursor molecule of triethoxysilane allowed to obtain better hydrophobic properties on the SiOx surface in shorter times compared to trichlorosilane, reaching the 92 % of final contact angle (CA) value of 106° after only 1 h of deposition. The optical properties and surface morphology were also assessed in function of time, revealing that an initial transparency reduction is followed by a subsequent transmittance increase during the self assembly of fluoroalkylsilanes on the SiOx surface, coherently with the surface roughness analysis data. Encouraging results were also obtained in terms of oleophobic properties improvement of the nanocoated surfaces.

1 January 2014 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
Gabriella RossiGabriella Rossi
Gabriella Rossi
Paola ScarfatoPaola Scarfato
Paola Scarfato
LILoredana Incarnato
Loredana Incarnato
A preliminary investigation was carried out on the possibility to improve the protective action offered by the standard multilayer structures used to encapsulate photovoltaic devices. With this aim, a commercial active barrier PET-based material, able to absorb oxygen when activated by liquid water, was used to produce flexible and transparent active barrier films, by means of a lab-scale film production plant. The obtained film, tested in terms of thermal, optical and oxygen absorption properties, shows a slow oxygen absorption kinetics, an acceptable transparency and an easy roll-to-roll processability, so proving itself as a good candidate for the development of protective coating for solar cells against the atmospheric degradation agents like the rain.

24 October 2026 in Coatings
Verified
Journal Article
Open access
PDF file
ADAntonio D'Angelo
Antonio D'Angelo
SESalvatore Esposito
Salvatore Esposito
CDClaudia Diletto
Claudia Diletto
Gabriella RossiGabriella Rossi
Gabriella Rossi
RVRaffaele Volpe
Raffaele Volpe
MLMichela Lanchi
Michela Lanchi
This work presents a modular W/Ag/AlN infrared reflector for solar selective absorber coatings (SSACs) intended for CSP/CST receiver tubes operating under vacuum at 550 °C. Optical analyses showed that AlN deposition preserved Ag infrared reflectance. Two Ag/AlN bilayers reduced the W reflector’s hemispherical emittance from 7.5% to 2.9%, calculated from room-temperature reflectance weighted at 550 °C. The reflector was first integrated into an SSAC for durability assessment. Accelerated aging under vacuum at 620, 650, and 690 °C yielded an Arrhenius activation energy of 497 kJ/mol and predicted an emittance increase of 0.34 percentage points after 25 years at 550 °C (8 h/day). An optimized SSAC subsequently achieved 95.2% solar absorptance and 11.3% hemispherical emittance on stainless steel, based on room-temperature reflectance. Simulations incorporating temperature-dependent optical properties estimated an emittance of 13.4% at 550 °C, versus 14.7% for a W-based coating. The previous Ag-based coating had lower estimated emittance (11.0%) but required three times more Ag. A 96 h aging test at 650 °C showed that the optimized SSAC exhibited an emittance degradation rate comparable to those of the samples of the coating used in the durability study, supporting the long-term stability prediction for the optimized architecture.