Ghassan Mohammed Taha Abdalla

Dr. Ghassan Mohammed Taha Abdalla

Electrical Engineering, University of Tabuk, Tabūk, Saudi Arabia
orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2022 in Separations
Verified
Journal Article
Open access
PDF file
Ramzi HarharahRamzi Harharah
Ramzi Harharah
GAGhassan Mohammed Taha Abdalla
Ghassan Mohammed Taha Abdalla
AEAbubakr Elkhaleefa
Abubakr Elkhaleefa
ISIhab Shigidi
Ihab Shigidi
Hamed Nasser HarharahHamed Nasser Harharah
Hamed Nasser Harharah
The study aims to treat artificial wastewater contaminated with copper (II) ions by reverse osmosis using (SEPA CF042 Membrane Test Skid-TFC BW30XFR). Several concentrations of feedstock were prepared. Different operating pressure, temperature, and flow rate were applied. The effect of these operating conditions on both the amount of Cu (II) removal and the permeate flux was monitored. The results of the study revealed that both the permeate flux and Cu (II) removal amount were directly proportional to the operating pressure and feed temperature but inversely proportional to the feed concentration. In contrast, the feed flow rate showed a negligible effect on the permeate flux and Cu (II) removal amount. The temperature correction factor (TCF) of the membrane was calculated and was found to be directly proportional to the feed temperature but inversely proportional to the applied pressure. It was seen that the concentration and flow rate of that feed did not affect the temperature correction factor. Mathematical models have been developed based on these experimental data for both permeate flux and the Cu (II) removal. It was noted that the permeate flux model matched the experimental data, while the Cu (II) removal model did not show a perfect match. In addition to the above, the research highlights for subsequent studies the possibility of a deep link between experimental work and mathematical models.

1 June 2009
Verified
Conference Paper
Closed access
GAGhassan Mohammed Taha Abdalla
Ghassan Mohammed Taha Abdalla
MAMosa Ali Abu-Rgheff
Mosa Ali Abu-Rgheff
SSSidi-Mohammed Senouci
Sidi-Mohammed Senouci
The IEEE is working on a MAC standard (802.11p) for VANET based on 802.11e. Although the access function of 802.11e supports QoS by using different backoff counters and interframe spaces for different QoS requirements, this reduces to a best effort service and low performance when the number of vehicles increases. Some applications of VANET, particularly safety related, have strict QoS requirements that cannot be guaranteed by 802.11p especially in heavy traffic conditions. To resolve these issues, we propose space-orthogonal frequency-time medium access control (SOFT MAC) protocol that can support QoS requirements and is compatible with 802.11 standard. The proposed MAC allocates guaranteed transmission slots via reservation and also has a random access period for best effort service. Reservations are allocated in a distributed manner without the need for a basestation or a cluster head. In this paper we analyse and discuss in details the rules and algorithms that govern SOFT MAC protocol and also explain its implementation using 802.11. The analysis of SOFT MAC proves it achieves higher saturation throughput than 802.11.

26 September 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
NANada Warid Alhathlaul
Nada Warid Alhathlaul
ALAbderrahim Lakhouit
Abderrahim Lakhouit
GAGhassan Mohammed Taha Abdalla
Ghassan Mohammed Taha Abdalla
AAAbdulaziz Alghamdi
Abdulaziz Alghamdi
MSMahmoud Shaban
Mahmoud Shaban
FAFahad M Alshammari
Fahad M Alshammari
Accurate forecasting of waste is essential for effective management and allocation of resources. As urban populations grow, the demand for municipal waste systems increases, creating the need for reliable forecasting methods to support planning and decision making. This study compares statistical models Error Trend Seasonality (ETS) and Auto Regressive Integrated Moving Average (ARIMA) with advanced machine learning approaches, including Random Forest (RF), Extreme Gradient Boosting (XGBoost), and Long Short-Term Memory (LSTM) networks. Five waste categories were analyzed: dead animal, building, commercial, domestic, and liquid waste. Historical datasets were used for model training and validation, with accuracy assessed through mean absolute error and root mean squared error. Results indicate that ARIMA generally outperforms ETS in forecasting building, commercial, and domestic waste streams, especially in capturing long-term domestic waste patterns. Both statistical models, however, show limitations in predicting liquid waste due to its irregular and highly variable nature, where even baseline models sometimes perform competitively. In contrast, machine learning methods consistently achieve the lowest forecasting errors across all categories. Their capacity to capture nonlinear relationships and adapt to complex datasets highlights their reliability for real-world waste management. The findings underline the importance of selecting forecasting techniques tailored to the characteristics of each waste type rather than applying a uniform method. By improving forecasting accuracy, municipalities and policymakers can design more effective waste management strategies that align with Sustainable Development Goal 11 on sustainable cities and communities, Sustainable Development Goal 12 on responsible consumption and production, and Sustainable Development Goal 13 on climate action.

18 November 2022 in Membranes
Verified
Journal Article
Open access
PDF file
ISIhab Shigidi
Ihab Shigidi
Ramzi HarharahRamzi Harharah
Ramzi Harharah
GAGhassan Mohammed Taha Abdalla
Ghassan Mohammed Taha Abdalla
AEAbubakr Elkhaleefa
Abubakr Elkhaleefa
NANorah Salem Alsaiari
Norah Salem Alsaiari
Mohamed G. HassanMohamed G. Hassan
Mohamed G. Hassan
The reverse osmosis performance in removing nickel ions from artificial wastewater was experimentally and mathematically assessed. The impact of temperature, pressure, feed concentration, and feed flow rate on the permeate flux and Ni (II) rejection % were studied. Experiments were conducted using a SEPA CF042 Membrane Test Skid—TFC BW30XFR with applied pressures of 10, 20, 30, and 40 bar and feed concentrations of 25, 50, 100, and 150 ppm with varying operating temperatures of 25, 35, and 45 °C, while the feed flow rate was changed between 2, 3.2, and 4.4 L/min. The permeate flux and the Ni (II) removal % were directly proportional to the feed temperature and operating pressure, but inversely proportional to the feed concentration, where the permeate flux increased by 49% when the temperature was raised from 25 to 45 °C, while the Ni (II) removal % slightly increased by 4%. In addition, the permeate flux increased by 188% and the Ni (II) removal % increased to 95.19% when the pressure was raised from 10 to 40 bar. The feed flow rate, on the other hand, had a negligible influence on the permeate flux and Ni (II) removal %. The temperature correction factor (TCF) was determined to be directly proportional to the feed temperature, but inversely proportional to the operating pressure; nevertheless, the TCF was unaffected either by the feed flow rate or the feed concentration. Based on the experimental data, mathematical models were generated for both the permeate flux and nickel removal %. The results showed that both models matched the experimental data well.

19 November 2019 in The Journal of Supercomputing
Verified
Journal Article
Closed access
PDF file
MMMohammed Mustafa
Mohammed Mustafa
GAGhassan Mohammed Taha Abdalla
Ghassan Mohammed Taha Abdalla
Manimurugan S.Manimurugan S.
Manimurugan S.
AAAdel R. Alharbi
Adel R. Alharbi

21 May 2025 in Buildings
Verified
Journal Article
Open access
PDF file
ALAbderrahim Lakhouit
Abderrahim Lakhouit
GAGhassan Mohammed Taha Abdalla
Ghassan Mohammed Taha Abdalla
EEEltayeb Hassan Onsa Elsadig
Eltayeb Hassan Onsa Elsadig
WAWael S. Al-Rashed
Wael S. Al-Rashed
IAIsam Abdel-Magid
Isam Abdel-Magid
Assoc. Prof. Dr. Gasim HayderAssoc. Prof. Dr. Gasim Hayder
Assoc. Prof. Dr. Gasim Hayder
Sustainable design in large-scale infrastructure projects, such as airports, is crucial for minimizing environmental impacts while ensuring long-term financial feasibility. This study focuses on selecting the most sustainable pavement solution for airport construction, using Tabuk Airport in Saudi Arabia as a case study. The purpose of this study is to evaluate four pavement alternatives using a multi-criteria decision-making approach to identify the optimal solution in terms of sustainability, cost-effectiveness, and feasibility. The alternatives were assessed based on nine key criteria, including environmental impact, durability, cost, and maintenance. The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method ranks the alternatives, while the Fuzzy Analytic Network Process (FANP) calculates the criteria weights, addressing uncertainties and interdependencies. Geographic Information System (GIS) is integrated to incorporate spatial factors affecting pavement sustainability. The results show that the alternative using recycled materials (A4) is the most suitable, offering the best balance of sustainability and cost. A4 achieved the highest ranking in the evaluation, making it the recommended choice for the upcoming Tabuk Airport project. This study demonstrates the effective application of decision-making tools, such as TOPSIS, FANP, and GIS, in guiding sustainable infrastructure development and providing a replicable framework for similar projects worldwide.