Ground source heat pump (GSHP) is an innovative and perspective technology able to use the ground as a thermal sink or heat source. If combined with system operating at relatively low temperature, it represents a high efficiency solution for the heating of buildings. Complementarily, during cooling operation it has a good advantage with respect to air-cooled systems, because the ground temperature is stably lower than the outdoor air one. Geothermal heat pump systems are able to reduce the environmental impact of buildings for space heating and cooling by using the ground as an energy renewable source. This paper presents a review on the GSHP systems presenting both a summary of different ground-source typologies of heat pumps and a thermodynamic approach for their modeling. The irreversible thermodynamic approach is here summarized and exposed for a complete GSHPs system. This analytical approach is particularly useful for implementing an optimization design tool for GSHP systems. Recently many works have been published about exergy analysis of these systems. Those works suggest that future lines of development may be considered: a) the optimization based on the transient performance of GSHP systems and not on the sole design condition; b) the integration of irreversible thermodynamic optimization approach into the algorithms of control systems. The diffusion of optimized GSHP systems is essential in order to reduce fossil fuel consumption and CO2 emissions, complying with the EU's directive
4 January 2020 in Journal of Building Performance Simulation
The energy performance of urban buildings is affected by multiple climate phenomena such as heat island intensity, wind flow, solar obstructions and infrared radiation exchange in urban canyons, but a modelling procedure to account for all of them in building performance simulation is still missing. This paper contributes to fill this gap by describing a chain strategy to model urban boundary conditions suitable for annual simulations using dynamic thermal simulation tools. The methodology brings together existing physical and empirical climate models and it is applied to 10 case studies in Rome (Italy) and Antofagasta (Chile). The results show that urban climate varies significantly across a city depending on the density of urban texture and its impact on the annual energy demand depends on the region's climate. The urban shadows are crucial in cooling-dominated climates (Antofagasta) while the urban heat island intensity is more important in temperate climates (Rome). Abbreviations: ACH: Air change per hour; BPS: Building Performance Simulation; BS: British Standard; CNV: Controlled natural ventilation; H/W: height-to-width ratio of urban canyons; L/W: length-to-width ratio of urban canyons; UHI: Urban Heat Island; UWG: Urban Weather Generator model
Counterbalancing climate change is one of the biggest challenges for engineers around the world. One of the areas in which optimization techniques can be used to reduce energy needs, and with that the pollution derived from its production, is building design. With this study of a generic office located both in a northern country and in a temperate/Mediterranean site, we want to introduce a coding approach to dynamic energy simulation, able to suggest, from the early-design phases when the main building forms are defined, optimal configurations considering the energy needs for heating, cooling and lighting. Generally, early-design considerations of energy need reduction focus on the winter season only, in line with the current regulations; nevertheless a more holistic approach is needed to include other high consumption voices, e.g., for space cooling and lighting. The main considered design parameter is the WWR (window-to-wall ratio), even if further variables are considered in a set of parallel analyses (level of insulation, orientation, activation of low-cooling strategies including shading devices and ventilative cooling). Finally, the effect of different levels of occupancy was included in the analysis to regress results and compare the WWR with corresponding heating and cooling needs. This approach is adapted to Passivhaus design optimization, working on energy need minimisation acting on envelope design choices. The results demonstrate that it is essential to include, from the early-design configurations, a larger set of variables in order to optimize the expected energy needs on the basis of different aspects (cooling, heating, lighting, design choices). Coding is performed using Python scripting, while dynamic energy simulations are based on EnergyPlus.