Composite solid electrolytes (CSEs) have emerged as promising candidates for safe and high-energy–density solid-state lithium metal batteries (SSLMBs). However, concurrently achieving exceptional ionic conductivity and interface compatibility between the electrolyte and electrode presents a significant challenge in the development of high-performance CSEs for SSLMBs. To overcome these challenges, we present a method involving the in-situ polymerization of a monomer within a self-supported porous Li6.4La3Zr1.4Ta0.6O12 (LLZT) to produce the CSE. The synergy of the continuous conductive LLZT network, well-organized polymer, and their interface can enhance the ionic conductivity of the CSE at room temperature. Furthermore, the in-situ polymerization process can also construct the integration and compatibility of the solid electrolyte–solid electrode interface. The synthesized CSE exhibited a high ionic conductivity of 1.117 mS cm−1, a significant lithium transference number of 0.627, and exhibited electrochemical stability up to 5.06 V vs. Li/Li+ at 30 °C. Moreover, the Li|CSE|LiNi0.8Co0.1Mn0.1O2 cell delivered a discharge capacity of 105.1 mAh g−1 after 400 cycles at 0.5 C and 30 °C, corresponding to a capacity retention of 61%. This methodology could be extended to a variety of ceramic, polymer electrolytes, or battery systems, thereby offering a viable strategy to improve the electrochemical properties of CSEs for high-energy–density SSLMBs.
Solid‐state batteries (SSBs) are ideal candidates for next‐generation high‐energy‐density batteries in the Battery of Things era. Unfortunately, SSB application is limited by their poor ionic conductivity and electrode‐electrolyte interfacial compatibility. Herein, in situ composite solid electrolytes (CSEs) are fabricated by infusing vinyl ethylene carbonate monomer into a 3D ceramic framework to address these challenges. The unique and integrated structure of CSEs generates inorganic, polymer, and continuous inorganic–polymer interphase pathways that accelerate ion transportation, as revealed by solid‐state nuclear magnetic resonance (SSNMR) analysis. In addition, the mechanism and activation energy of Li+ transportation are studied and visualized by performing density functional theory calculations. Furthermore, the monomer solution can penetrate and polymerize in situ to form an excellent ionic conductor network inside the cathode structure. This concept is successfully applied to both solid‐state lithium and sodium batteries. The Li|CSE|LiNi0.8Co0.1Mn0.1O2 cell fabricated herein delivers a specific discharge capacity of 118.8 mAh g−1 after 230 cycles at 0.5 C and 30 °C. Meanwhile, the Na|CSE|Na3Mg0.05V1.95(PO4)3@C cell fabricated herein maintains its cycling stability over 3000 cycles at 2 C and 30 °C with zero‐fading. The proposed integrated strategy provides a new perspective for designing fast ionic conductor electrolytes to boost high‐energy solid‐state batteries.