Jingjing Guo

Dr. Jingjing Guo


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 December 2025 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
MWMeng Wang
Meng Wang
XYXinan Yu
Xinan Yu
SLShu Liu
Shu Liu
YCYulin Cheng
Yulin Cheng
JGJingjing Guo
Jingjing Guo
XDXingming Duan
Xingming Duan
The Upper Permian marine shale of the inter-platform basin in the Nanpanjiang Basin are rich in organic matter, widely distributed, and relatively thick, indicating abundant resource potential for hydrocarbon exploration. To clarify the sedimentary condition and the variability of reservoir properties, the paleo-environment was reconstructed by using geochemical, mineralogical, rock-property, and pore-structure data. Building on a lithofacies classification, the development patterns of different shale lithofacies were revealed. Reservoir characteristics among lithofacies were compared using scanning electron microscopy (SEM), nuclear magnetic resonance (NMR), and low-temperature Nuclear Magnetic Resonance Cryoporometry (NMRC) experiments. A fractal analysis was performed based on NMR and NMRC data to quantify pore-scale heterogeneity, calculate fractal dimensions (D1, D2, and Dc), and evaluate the complexity of pore systems across lithofacies. Correlation analysis and redundancy analysis were applied to further explore the controlling factors of reservoir heterogeneity. The results showed that organic-rich shale in the Permian Linghao Formation occurred mainly in the 1st Member, with average total organic carbon (TOC) content of 2.57%, and the lower part of the 3rd Member (average TOC content 2.88%). In the 1st Member, high-carbon shale was deposited under humid conditions with intense weathering, abundant fine-grained clastic input from basin margins, strongly reducing (anoxic) bottom waters, vigorous phosphorus recycling, and moderate to low primary productivity. Using TOC and mineral composition, seven shale lithofacies were identified in the Linghao Formation, and their development patterns were established based on depositional paleo-environment characteristics and evolution. In the 1st Member, organic-rich shale was dominated by mixed lithofacies with moderate to high TOC. The paleo-environment exerted a primary control on reservoir properties, gas content, pore structure, and heterogeneity. The high-carbon lithofacies had the most favorable rock properties—higher porosity, greater pore volume, and higher gas content—and contained a larger proportion of well-developed organic pores. Fractal analysis revealed that seepage pores exhibited greater structural complexity than adsorption-related pores, with the high-carbon lithofacies showing the highest overall fractal dimensions and thus the strongest heterogeneity. Across the formation, higher clay content and TOC were the primary drivers of increased pore-scale heterogeneity, whereas greater feldspar and quartz contents tended to diminish it. Carbonates exerted a minor effect. Heterogeneity in adsorption pores exerted the strongest influence on differences among lithofacies. These results highlighted the utility of fractal analysis in quantitatively linking shale mineralogy and organic content to multiscale heterogeneity in inter-platform basin settings.

30 June 2025 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
JGJingjing Guo
Jingjing Guo
GLGuotao Luo
Guotao Luo
HWHaitao Wang
Haitao Wang
LZLiehui Zhang
Liehui Zhang
The Upper Lianggaoshan (LGS) Formation in the northeastern Sichuan Basin, composed of shale with interbedded siltstone, is a promising target layer for shale oil. Accurate evaluation of pore structures is essential for effective exploration of shale oil. This study investigated pore structures of siltstone and shale samples from the Upper LGS Formation using low-pressure CO2 adsorption (LTCA), low-temperature N2 adsorption (LTNA), high-pressure mercury intrusion (HPMI), and nuclear magnetic resonance (NMR) methods. The single-exponent and multifractal dimensions of samples were determined, and the relationships between fractal dimensions and pore structures were explored. Results show that the pore size distribution (PSD) of siltstone and shale samples exhibits multi-peak characteristics, with mesopores (2–50 nm) being dominant in the total pore volumes. The multi-scaled pores in shale and siltstone samples exhibit fractal characteristics. The average values of single-fractal dimensions (D1, D2) obtained by LTNA data are 2.39 and 2.62 for shale samples, and 2.24 and 2.59 for siltstone samples, respectively. Compared to siltstones, the pore structures of shale samples exhibit greater complexity, indicated by larger fractal dimensions. The samples from subsections Liang 2 and Liang 3 exhibit greater heterogeneity compared to subsection Liang 1. The single-fractal dimensions of micropores and mesopores show positive correlations with specific surface area (SSA) and pore volume (PV), while the fractal dimension of macropores shows a negative correlation with average pore diameter and median radius. The average values of single-fractal dimension D3 obtained from HPMI data are 2.9644 and 2.9471 for shale and siltstone samples, respectively, indicating more complex structures of macropores in shale samples compared to siltstone samples. The average value of ΔDNMR and singularity strength range Δα obtained by a multifractal model for core samples from subsection Liang 1 are 1.868 and 2.155, respectively, which are the smallest among all of the three subsections, indicating that the heterogeneity of pore structures of subsection Liang 1 is the weakest. This research provides valuable guidance for shale oil development in the northeastern Sichuan Basin, China.

21 May 2026 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
MWMeng Wang
Meng Wang
SLShu Liu
Shu Liu
YWYuxi Wang
Yuxi Wang
XYXinan Yu
Xinan Yu
JLJun Lang
Jun Lang
JGJingjing Guo
Jingjing Guo
The deep marine shale of the Wufeng–Longmaxi (WF–LMX) Formation in the Sichuan Basin is characterized by laterally continuous thickness, high porosity, and significant gas content, making it a representative shale reservoir with considerable resource potential. This study investigates the heterogeneity of pore structures and their controlling factors using shale samples from three representative wells, based on low-temperature nitrogen adsorption and mercury intrusion data. The reservoir can be classified into three main lithofacies: mixed siliceous shale (MSS), clay-rich siliceous shale (CSS), and siliceous clay mixed shale (SMS). The results show that siliceous shales (MSS and CSS) exhibit higher total organic carbon and quartz contents, with more developed pore systems. Among them, the CSS exhibits the highest specific surface area and the largest mesopore and macropore volumes, indicating a greater development of larger pores and superior reservoir quality. All three shale facies exhibit clear single and multifractal characteristics. The average D1 and D2 values (fractal dimensions from nitrogen adsorption at P/P0 < 0.45 and >0.45, respectively) are higher than DHg, (fractal dimension from mercury intrusion), indicating greater pore-surface roughness than internal pore structure complexity and stronger heterogeneity in larger pores. The D(q)–q spectrum shows a left-wide/right-narrow pattern, whereas the α–f(α) spectrum exhibits the opposite trend. The branch-width ratios Skd and Ska (indices of pore-size distribution complexity and heterogeneity) are both <0.1, suggesting that heterogeneity is more pronounced in low-probability regions. Fractal and multifractal analyses reveal significant pore structure heterogeneity across different lithofacies, with CSS showing relatively more homogeneous pore structures, whereas MSS exhibits stronger heterogeneity and poorer connectivity. The heterogeneity of shale reservoirs is primarily controlled by pore development, especially micropores and mesopores, and is strongly influenced by total organic carbon and quartz content.

17 August 2026 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
XDXingming Duan
Xingming Duan
MWMeng Wang
Meng Wang
YCYulin Cheng
Yulin Cheng
SLShu Liu
Shu Liu
JGJingjing Guo
Jingjing Guo
BLBing Li
Bing Li
Tight sandstone reservoir effectiveness is governed not by pore volume alone, but by the storage and flow contributions of different pore-throat scales, their structural complexity, and their three-dimensional connectivity. This study investigates tight sandstones of the Benxi Formation deposited in a marine–continental transitional mixed siliciclastic–carbonate setting in the Gaoqiao area, southern Ordos Basin. Petrophysical measurements, red-epoxy-impregnated thin-section petrography, mercury intrusion capillary pressure (MICP), segment-specific fractal analysis of functionally defined pore-throat regimes, X-ray micro-computed tomography (micro-CT), and pore-network modeling (PNM) were integrated. The MICP responses define three pore-throat structure types and two data-derived functional boundaries at 0.708 and 0.141 μm, which separate large-pore-throat-dominated, transitional pore-throat, and fine-throat-limited intervals. Using these nominal boundaries, Type I is strongly dominated by the large-pore-throat interval, which accounts for 88.7% of total mercury intrusion, whereas Type II exhibits a mixed large-to-transitional response, and Type III is characterized by negligible large-pore-throat intrusion and pronounced fine-throat restriction. Perturbing both functional boundaries by ±5% and ±10% does not alter these principal functional distinctions, although samples close to the second boundary exhibit the expected local transitional sensitivity. Among the three segment-specific fractal parameters, the fine-throat fractal dimension, DB, shows the strongest association with median capillary pressure (r = 0.834, p < 0.001) and remains significantly related to displacement pressure, median pore-throat radius, and permeability, whereas DT shows no significant linear correlation with the tested petrophysical and MICP parameters. The fractions of the largest connected pore cluster in representative Type I–III samples are 90.26%, 72.56%, and 64.65%, while their PNM permeabilities decrease successively from 64.32 mD to 0.850 and 0.121 mD. Together, these results indicate that, for the investigated samples, reservoir effectiveness reflects the combined influence of pore-throat size configuration, segment-specific structural complexity, and three-dimensional network connectivity.

17 September 2026 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JGJingjing Guo
Jingjing Guo
MMMinjie Mao
Minjie Mao
CJChaozhi Jiang
Chaozhi Jiang
The diffusion characteristics of CH4 and CO2 in micro–nanopores of shale gas reservoirs exert a significant impact on the production performance of supercritical CO2-enhanced shale gas recovery. High-temperature and high-pressure experimental investigations on shale gas diffusion are still relatively limited compared with abundant laboratory studies under conventional conditions. To investigate the diffusion kinetic behavior of CH4 and CO2 in shale micro–nanopores under high-temperature and high-pressure conditions, a series of isobaric diffusion experiments across variable pressure and temperature conditions were performed on marine shale samples from the Longmaxi Formation in the Sichuan Basin, China. A diffusion coefficient model that incorporates both bulk diffusion and surface diffusion mechanisms was adopted to fit the experimental data, and the influences of shale pore size, temperature, and pressure on the diffusion behaviors of CH4 and CO2 in shale reservoirs were systematically analyzed. The results indicate the following: (1) Under identical high-temperature and high-pressure conditions, the diffusion coefficient of CH4 in shale nanopores is larger than that of CO2. (2) The diffusion coefficients of CH4 and CO2 exhibit a positive correlation with temperature and a negative correlation with pressure. (3) Under the coupled influence of temperature and pressure, the diffusion coefficients of CH4 and CO2 generally exhibit a decreasing trend as both temperature and pressure increase simultaneously. (4) The pore size distribution of shale samples has a significant effect on the diffusion characteristics of both gases. The larger the overall pore size of the shale, the greater the diffusion coefficients of CH4 and CO2 under identical temperature and pressure conditions. The research findings provide valuable insights for the dynamic prediction of supercritical CO2 enhanced shale gas recovery.