HAKAN ÇANDAR

Dr. HAKAN ÇANDAR

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 September 2017 in High Pressure Research
Verified
Journal Article
Closed access
HÇHAKAN ÇANDAR
HAKAN ÇANDAR
IFİ. Hüseyin Filiz
İ. Hüseyin Filiz

12 July 2024 in Materials
Verified
Journal Article
Open access
PDF file
MPMuhammed PAKSOY
Muhammed PAKSOY
HÇHAKAN ÇANDAR
HAKAN ÇANDAR
NYNecip Fazıl Yılmaz
Necip Fazıl Yılmaz
This study investigates the effects of a water-guided laser on the cutting performance of AISI 1020 steel sheets of various thicknesses by comparing the results with respect to a conventional laser. For this purpose, a novel nozzle design has been devised enabling the delivery of laser beams to the workpiece conventionally as well as through water guidance. Diverging from prior literature, a fiber laser is used with a high wavelength and a laser power output of 1 kW. Experiments are conducted on steel sheets with thicknesses ranging from 1.5 mm to 3 mm using three different cutting speeds and laser power levels. Analysis focuses on assessing surface roughness, burr formation and heat effects on the cut surfaces for both conventional and waterjet-guided cutting. Surface roughness is evaluated by using a 3D profilometer and cut surfaces are examined through SEM imaging. The results showed that the waterjet-guided laser system greatly reduced surface roughness and minimized problems associated with traditional laser cutting such as kerf, dross adherence and thermal damage. The study revealed that cutting speed had a greater effect on surface roughness reduction than laser power, with the most noticeable differences occurring in thinner sheets. Furthermore, the investigation suggests that the waterjet-guided laser cutting system demonstrates superior performance relative to conventional methods, particularly in surface quality.

1 August 2017 in Universal Journal of Engineering Science
Verified
Journal Article
Open access
PDF file
HÇHAKAN ÇANDAR
HAKAN ÇANDAR
IFİ. Hüseyin Filiz
İ. Hüseyin Filiz
This study presents analytical approach for the determination of optimum autofrettage pressure of a thick walled cylinder which is commercially used as a high pressure cylinder of a waterjet intensifier pump. Bilinear kinematic hardening model is used in the derivation of analytical model based on plane strain, Von-Mises yield criteria and incompressible volume assumptions. Elasto-plastic radius is dependent on autofrettage pressure and optimum value of autofrettage pressure is found as a value that will give minimum value of maximum Von-Mises stress on the wall of the cylinder under operating pressure. Hence, considering elasto-plastic radius as the design variable, its optimum value is determined for the specified operating pressure. Reverse yielding owing to Bauschinger effect is used as the only non-linear constraint, Matlab© optimtool finds optimum value of the elasto-plastic radius and the corresponding autofrettage pressure is then calculated. By using ANSYS 15©, stress analysis of the autofrettaged cylinder has been performed and the results obtained from both methods are found to be almost the same.

26 June 2025
Verified
Book Chapter
Open access
PDF file
ZÇZihni Alp Çevik
Zihni Alp Çevik
KEKaan Emre Engin
Kaan Emre Engin
OEOMER EYERCIOGLU
OMER EYERCIOGLU
HÇHAKAN ÇANDAR
HAKAN ÇANDAR
MDMehtap Demirel
Mehtap Demirel
EÜErkan Üstün
Erkan Üstün
Fused Deposition Modeling (FDM), one of the most widely used additive manufacturing technologies, has gained significant attention due to its cost-effectiveness, flexibility in material selection, and ease of use. This method involves the layer-by-layer deposition of thermoplastic filaments melted through a nozzle to fabricate three-dimensional objects based on digital models. FDM is extensively utilized in both industrial and academic settings for prototyping and producing functional components across various sectors, including automotive, aerospace, biomedical engineering, and education. The process enables the creation of complex geometries that are difficult to achieve with traditional manufacturing methods, while also minimizing material waste. However, despite its advantages such as rapid prototyping, simplicity, and compatibility with a wide range of materials—including PLA, ABS, PETG, and fiber-reinforced composites—FDM has inherent limitations. These include anisotropic mechanical properties, surface roughness, limited dimensional accuracy, and potential printing errors such as warping, layer shifting, and nozzle clogging. Several process parameters, such as layer height, nozzle temperature, infill percentage, and build platform temperature, significantly influence the final product's quality and mechanical performance. Optimization of these parameters is crucial for improving part strength, dimensional accuracy, and surface finish. Recent advancements aim to enhance FDM’s capabilities through innovations like continuous fiber reinforcement, 4D printing, and the use of recycled materials. This review highlights the theoretical background, working principles, materials, parameters, challenges, and application areas of FDM technology. It also emphasizes the importance of ongoing research in material development, process optimization, and system design to expand FDM’s applicability beyond prototyping into serial production and high-performance industries.

26 June 2025
Verified
Book Chapter
Open access
PDF file
GÖGanime Tuğba Önder
Ganime Tuğba Önder
KEKaan Emre Engin
Kaan Emre Engin
OEOMER EYERCIOGLU
OMER EYERCIOGLU
ZÇZihni Alp Çevik
Zihni Alp Çevik
HÇHAKAN ÇANDAR
HAKAN ÇANDAR
EÜErkan Üstün
Erkan Üstün
İmalat ortamlarında bulunan, zehirli, yanıcı, patlayıcı ya da oksijen seviyesinde olumsuz değişikliklere neden olan tehlikeli gazların tespit edilmesi, izlenmesi ve kontrol edilmesi büyük önem taşımaktadır. İmalat süreçlerinin kaliteli, verimli ve çevreye zarar vermeden devam edebilmesi için her aşamasında takip edilmesi gerekir. Özellikle, gerçekleştirilen kesme, delme, kaynak gibi mekanik operasyonlar, ortamda var olan gazların niteliğine ve miktarına bağlı olarak her an tepkime yaratabilir ve geri döndürülemez kayıplara neden olabilir. İmalat sürecinin ve çevrenin olumsuz etkilenmemesi, iş akışında duraklamalar yaşanmaması için imalat öncesinde ve imalat esnasında bazı prosedürlerin uygulanması gerekir. Bu çalışmada, gaz ölçümü gerçekleştirilmesi gereken ortamlar, iş kazası, zehirlenme ve patlama gibi olumsuzlukların önüne geçilmesi için yapılması gerekenler anlatılmaktadır. Bu sayede sistemlerin düşük maliyetli, çevre açısından sorun teşkil etmeden, verimli ve güvenli çalışması sağlanabilmektedir.

3 January 2026 in Coatings
Verified
Journal Article
Open access
PDF file
ZGZehra Güner
Zehra Güner
GKGökçe Keçeci
Gökçe Keçeci
SOSadık Olguner
Sadık Olguner
HÇHAKAN ÇANDAR
HAKAN ÇANDAR
ABAyşenur güngör borsöken
Ayşenur güngör borsöken
STSebnem Turkun
Sebnem Turkun
This study aimed to evaluate the effects of thermal cycling and restorative material type on surface roughness of material surfaces and dental interfaces using a non-contact profilometer. Ninety Class V cavities (2 mm × 4 mm × 2 mm in height, width, and depth) were prepared on extracted third molars and restored with four bio-interactive materials (Equia Forte, Cention-N, Activa BioActive Restorative, Fuji II LC) and one composite resin (Solare-X) (n = 18/group). After polishing (Optidisc), initial surface roughness (Sa, µm) was measured following 24 h immersion in distilled water. Measurements were performed at cement/material (400 × 1600 μm2), enamel/material (1600 × 400 μm2), and material surfaces (800 × 800 μm2). Samples underwent 10,000 thermal cycles (5–55 °C) to simulate aging, and roughness was re-measured. Data were analyzed with two-way repeated measures ANOVA and Tukey’s post hoc test (p < 0.05). Solare-X showed the lowest roughness, while Fuji II LC and Activa BioActive Restorative were smoother than Cention-N and Equia Forte (p < 0.01). All materials exhibited significant roughness increases after thermal cycling (p < 0.01). Cement/material and enamel/material interfaces consistently showed higher roughness than material surfaces (p < 0.01). Thermal cycling significantly increased surface roughness of all tested materials. Interfaces demonstrated greater roughness than material surfaces, indicating higher susceptibility to plaque retention and potential risk for long-term restoration success.