Manuel Jesus Hermoso-Orzáez

Prof. Dr. Manuel Jesus Hermoso-Orzáez

University of Jaén, Jaén, Andalusia, Spain
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 July 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
FMFrancisco Javier Montiel-Santiago
Francisco Javier Montiel-Santiago
Manuel Jesus Hermoso-OrzáezManuel Jesus Hermoso-Orzáez
Manuel Jesus Hermoso-Orzáez
JTJulio Terrados-Cepeda
Julio Terrados-Cepeda
One of the least used aspects of BIM (Building Information Modeling) is the ability to obtain the energy model of the building using the BIM methodology known as BIM 6D. This digital information model allows simulating the real energy behavior of the building and the improvement in the building’s lighting systems, both natural and artificial, in particular daylighting. In this way, the BIM 6D simulation allows us to make design and operation decisions for the building, not only for new buildings that must be, in accordance with current legislation, NZEB (Nearly Zero-Energy Building) but also for the rehabilitation of existing buildings. Particularly in buildings for sanitary use, BIM 6D allows an exhaustive analysis of the energy impact of said rehabilitation, guiding it towards an improvement in energy and light efficiency, which in turn provides greater quality and comfort in the use of the sustainable building. This subject of study is especially important in public buildings for hospital use. Buildings where energy efficiency and comfort, oriented towards optimal and efficient lighting, are two fundamental criteria highly appreciated by patients and citizens in general. Once the energy model of the building has been obtained, it is possible to study and identify possible alternatives to improve energy efficiency and improve lighting, as well as to analyze the possibilities of incorporating other more efficient forms of renewable energy, such as the use of daylight. In this work we can see how applying a set of simulated improvement actions in BIM 6D achieves an energy saving of 50% in general and up to 13% only by acting on lighting systems, allowing the decarbonization of buildings with high energy consumption, such as hospitals, and in turn, will lead to an improvement in the energy certification of these buildings; thus achieving a better and higher quality of habitability, using more efficient forms of lighting and transforming buildings into more sustainable spaces.

21 February 2020 in Environmental Science and Pollution Research
Verified
Journal Article
Closed access
PDF file
Manuel Jesus Hermoso-OrzáezManuel Jesus Hermoso-Orzáez
Manuel Jesus Hermoso-Orzáez
MGMiriam García-Alguacil
Miriam García-Alguacil
JTJulio Terrados-Cepeda
Julio Terrados-Cepeda
Paulo BritoPaulo Brito
Paulo Brito

18 August 2018 in Sustainability
Verified
Journal Article
Open access
PDF file
JLJosé Adolfo Lozano-Miralles
José Adolfo Lozano-Miralles
Manuel Jesus Hermoso-OrzáezManuel Jesus Hermoso-Orzáez
Manuel Jesus Hermoso-Orzáez
CARMEN MARTÍNEZ-GARCÍACARMEN MARTÍNEZ-GARCÍA
CARMEN MARTÍNEZ-GARCÍA
José Ignacio Rojas-SolaJosé Ignacio Rojas-Sola
José Ignacio Rojas-Sola
The construction industry is responsible for 40–45% of primary energy consumption in Europe. Therefore, it is essential to find new materials with a lower environmental impact to achieve sustainable buildings. The objective of this study was to carry out the life cycle analysis (LCA) to evaluate the environmental impacts of baked clay bricks incorporating organic waste. The scope of this comparative study of LCA covers cradle to gate and involves the extraction of clay and organic waste from the brick, transport, crushing, modelling, drying and cooking. Local sustainability within a circular economy strategy is used as a laboratory test. The energy used during the cooking process of the bricks modified with organic waste, the gas emission concentrate and the emission factors are quantified experimentally in the laboratory. Potential environmental impacts are analysed and compared using the ReCiPe midpoint LCA method using SimaPro 8.0.5.13. These results achieved from this method are compared with those obtained with a second method—Impact 2002+ v2.12. The results of LCA show that the incorporation of organic waste in bricks is favourable from an environmental point of view and is a promising alternative approach in terms of environmental impacts, as it leads to a decrease of 15–20% in all the impact categories studied. Therefore, the suitability of the use of organic additives in clay bricks was confirmed, as this addition was shown to improve their efficiency and sustainability, thus reducing the environmental impact.

1 February 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
LCLuís Filipe do Carmo Calado
Luís Filipe do Carmo Calado
Manuel Jesus Hermoso-OrzáezManuel Jesus Hermoso-Orzáez
Manuel Jesus Hermoso-Orzáez
Roberta Mota PanizioRoberta Mota Panizio
Roberta Mota Panizio
BGBruno B. Garcia
Bruno B. Garcia
Paulo BritoPaulo Brito
Paulo Brito
The present work studies the possibility of energy recovery by thermal conversion of combustible residual materials, namely tires and rubber-plastic, plastic waste from outdoor luminaires. The waste has great potential for energy recovery (HHV: 38.6 MJ/kg for tires and 31.6 MJ/kg for plastic). Considering the thermal conversion difficulties of these residues, four co-combustion tests with mixtures of tires/plastics + pelletized Miscanthus, and an additional test with 100% Miscanthus were performed. The temperature was increased to the maximum allowed by the equipment, about 500 °C. The water temperature at the boiler outlet and the water flow were controlled (60 °C and 11 L/min). Different mixtures of residues (0–60% tires/plastics) were tested and compared in terms of power and gaseous emissions. Results indicate that energy production increased with the increase of tire residue in the mixture, reaching a maximum of 157 kW for 40% of miscanthus and 60% of tires. However, the automatic feeding difficulties of the boiler also increased, requiring constant operator intervention. As for plastic and rubber waste, fuel consumption generally decreased with increasing percentages of these materials in the blend, with temperatures ranging from 383 °C to 411 °C. Power also decreased by including such wastes (66–100 kW) due to feeding difficulties and cinder-fusing problems related to ash melting. From the study, it can be concluded that co-combustion is a suitable technology for the recovery of waste tires, but operational problems arise with high levels of residues in the mixture. Increasing pollutant emissions and the need for pre-treatments are other limiting factors. In this sense, the thermal gasification process was tested with the same residues and the same percentages of mixtures used in the co-combustion tests. The gasification tests were performed in a downdraft reactor at temperatures above 800 °C. Each test started with 100% acacia chip for reference (like the previous miscanthus), and then with mixtures of 0–60% of tires and blends of plastics and rubbers. Results obtained for the two residues demonstrated the viability of the technology, however, with mixtures higher than 40% it was very difficult to develop a process under stable conditions. The optimum condition for producing a synthesis gas with a substantial heating value occurred with mixtures of 20% of polymeric wastes, which resulted in gases with a calorific value of 3.64 MJ/Nm3 for tires and 3.09 MJ/Nm3 for plastics and rubbers.

28 October 2019 in Sustainability
Verified
Journal Article
Open access
PDF file
Manuel Jesus Hermoso-OrzáezManuel Jesus Hermoso-Orzáez
Manuel Jesus Hermoso-Orzáez
JLJosé Adolfo Lozano-Miralles
José Adolfo Lozano-Miralles
RLRafael López-García
Rafael López-García
Paulo BritoPaulo Brito
Paulo Brito
The technological change to LEDs is an unstoppable reality which, little by little, is becoming increasingly important in terms of the lighting inside and outside our homes. The exterior lighting of our cities is moving decisively and clearly towards the incorporation of this technology in urban spaces. The energy efficiency, light quality, and economic benefits of LED technology are an unquestionable reality. This is causing public administration projects involving large-scale switches to LEDs to be promoted and financed; however, it is beginning to be observed that the commitment to the policies decided by this technology should take into account some environmental aspects which have not been studied to date. The environmental impact of the substitutions is caused by the need to valorize the replaced luminaires. Until now, most have been stored without the possibility of use, reuse, or recovery. The environmental impact produced in the manufacture of LED luminaires that replace the old sodium vapor (VSAP) or metal halide (MH) discharge lamps must also be considered. In addition, in the administrative clauses specifications that govern the public tenders, it is observed that the fundamental environmental aspects both of recycling the old lamps, and of the life cycle analysis (LCA) of the luminaires that are replacing them, have not been contemplated or valued with sufficient weight. In addition, there are very few public substitution contests in which environmental criteria are rewarded or valued in an important way. This work intends to summarize a methodological proposal using the techniques of multiple decision-making criteria for the selection of bidding companies for public outdoor lighting competitions. We propose the use of the PROMETHEE method multi-criteria analysis for the application of the most commonly used criteria for the luminaire LED selection process, including an environmental impact assessment with LCA techniques, and propose this as a case or model guide in the public contests of cities. A model of the bidding conditions that addresses and assesses the environmental aspects which are absolutely key to sustainable development is supported by the ecological criteria of the circular economy.

10 August 2021 in Annals of Operations Research
Verified
Journal Article
Open access
PDF file
Manuel Jesus Hermoso-OrzáezManuel Jesus Hermoso-Orzáez
Manuel Jesus Hermoso-Orzáez
JGJ. Garzón-Moreno
J. Garzón-Moreno
This work provides a general risk management procedure applied to synchronized supply chains. After conducting a literature review and taking the international standard ISO 28000 and ISO 31000 as a reference. The most important steps that enable organizations to carry out supply chain risk management are described. Steps such as defining the context, identifying and analyzing risks or avoiding them, controlling them and mitigating them are some of the main points of this work. On the other hand, we carried out a practical case in which the execution of this procedure is carried out in a real supply chain located in the city of Jaén. In this specific case study, the most important risks and those that require early treatment will be discussed. In addition, a series of suggestions and ideas will be established, by way of conclusions, that allow said organization to improve the results that we have obtained in risk management.