Hydrogen refueling stations (HRS) operating at high pressures pose a higher risk of leakage than conventional gas stations. Therefore, in this study, a quantitative risk assessment (QRA) was conducted using DNV-GL SAFETI v.8.9. The impact of the shutoff valve was quantitatively assessed, and step-by-step mitigation was applied to propose the minimum installation requirements for the valve necessary to achieve broadly acceptable risk levels. The QRA includes sequence analysis (CA), individual risk (IR), and societal risk (SR), with accident scenarios consisting of catastrophic ruptures and three leak scenarios. The research results indicate that the application of a dual shutoff valve system resulted in an IR of 7.48 × 10−5, effectively controlling the risk below the as low as reasonably practicable (ALARP) criteria of the Health and Safety Executive (HSE). The SR was analyzed based on the ALARP criteria in the Netherlands, and the application of the dual shutoff valve system effectively controlled the risk below the ALARP criteria. Consequently, this study suggests that applying a dual shutoff valve system with a mitigation value exceeding 1.21 × 10−2 can successfully mitigate the risk of urban hydrogen refueling stations to broadly acceptable levels.
This study applied a risk assessment technique to the steam reforming process in hydrogen production facilities to generate baseline data for preparing safety protocols in related workplaces. To this end, consequence analysis (CA) was conducted using DNV-PHAST v.8.9., focusing on the reforming process, which operates at the highest temperature and pressure among related processes. This study predicted jet fire damage resulting from the total failure of a 65 mm syngas pipe at the rear end of the reformer, with a projected flame length of up to 23.6 m based on a radiant heat of 5 kW/m2. As per the assessment, a vapor cloud explosion (VCE) caused damage of up to 42.6 m at an overpressure of 0.07 bar (1 psi), while a flash fire had an impact range of approximately 12.7 m based on hydrogen’s LFL (lower flammable limit). This quantitative risk assessment of the general steam reforming process provides valuable basic data for the design and operation of related facilities.
This study focuses on identifying key factors that companies should prioritize to prevent chemical accidents from an ESG (Environmental, Social, and Governance) perspective. ESG provides insight into corporate sustainability by comprehensively considering both external impacts and internal risks. To achieve this, this study applied a scoring approach based on double materiality, assessing both internal and external impacts. The assessment process involved data collection, categorization of accident causes, score calculation, and prioritization of safety management items. Data from chemical accident statistics revealed that mechanical integrity, human factors, and preventive maintenance were the primary causes across all three countries. Internal impacts were evaluated by accident severity and frequency, while external impacts considered casualties and management priorities. Internal impact results showed mechanical integrity as critical in the U.S., preventive maintenance in the U.K., and human factors in Republic of Korea. For external impacts, human factors were most critical in Republic of Korea. To prioritize safety management elements for chemical accident prevention from an ESG perspective, this study categorized them into three tiers. Tier 1 represents the most critical elements requiring urgent attention, while Tier 3 includes the least critical elements. This tier classification is intended not as an absolute ranking but as a general reference for identifying overall trends in safety management priorities. Tier 1 included the U.K.’s preventive maintenance and human factors across all countries, with Republic of Korea’s human factors being the most vulnerable. Tier 2 revealed operating procedures and human factors as critical, with U.S. emergency preparedness and U.K. design highlighted. Tier 3, with impact scores below 1, was safest. These findings effectively identified safety management priorities to enhance accident prevention.