Joanna Igielska-Kalwat

Dr. Joanna Igielska-Kalwat

University of Education and Therapy
+1
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
MFMarcel Firlej
Marcel Firlej
Katarzyna ZaborowiczKatarzyna Zaborowicz
Katarzyna Zaborowicz
Maciej ZaborowiczMaciej Zaborowicz
Maciej Zaborowicz
EFEwa Firlej
Ewa Firlej
IDIvo Domagała
Ivo Domagała
BBBarbara Danuta Biedziak
Barbara Danuta Biedziak
Orthodontic retention is the final important stage of orthodontic treatment, the aim of which is to consolidate the functional and aesthetic position of teeth. Among adults, fixed retainers made of different types of wires are the most common. The aim of this study was to analyse the mechanical properties of a new generation of fixed orthodontic retainers—printed by 3D printers. Materials and Methods: The study was conducted using samples made of Nextdent MFH C&B N1 resin in the form of cuboid bars with nominal dimensions of width b = 3 mm, thickness d = 0.8 mm; 1 mm; 1.2 mm, length l = 30 mm for each type. The influence of the thickness of the retainers on their strength under loaded conditions was evaluated. Flexural strength, elastic properties, deflection, and creep were compared. The samples were aged in an artificial saliva bath at 37 ± 1 °C during the strength tests. Results: It was shown that differences in the thickness of the samples affected their elastic and strength properties. The highest average flexural modulus, the highest deflection, creep, and strength was characteristic of the samples with the highest thickness (1.2 mm). Samples with an average thickness of 1 mm had the lowest modulus of elasticity. Conclusions: The mechanical properties of 3D printed retainers show that they can be an alternative to metal retainers and the procedure of making new retainers, especially when patients have aesthetic requirements or allergies to metals.

20 August 2021 in Materials
Verified
Journal Article
Open access
PDF file
MFMarcel Firlej
Marcel Firlej
DPDaniel Pieniak
Daniel Pieniak
ANAgata M. Niewczas
Agata M. Niewczas
AWAgata Walczak
Agata Walczak
IDIvo Domagała
Ivo Domagała
BBBarbara Danuta Biedziak
Barbara Danuta Biedziak
With easy-to-process 3D printing materials and fast production, the quality of dental services can be improved. In the conventional procedure, the dentist makes temporary crowns directly in the patient’s mouth, e.g., from the most commonly used bis-acrylic composites. Temporary crowns made directly in the office without the use of CAD/CAM are often of inferior quality, which directly results in impaired hygiene, poorer masticatory mechanics, greater deposition of plaque, calculus and sediment, and may adversely affect periodontal and gum health. The mechanical strength, resistance to aging and abrasion of 3D printing materials are higher than those of the soft materials used in conventional methods. This translates into durability. The patient leaves the surgery with a restoration of higher utility quality compared to the conventional method. The objective of the paper was to determine the influence of aging in artificial saliva of AM (additive manufacturing) orthodontic composites on their functional properties. For the purpose of the study, fillings well-known worldwide were selected. These were traditional UV-curable resins (M I, M II, M III, M V) and a hybrid material based on a UV-curable resin (M VI). Samples were stored in artificial saliva at 37 ± 1 °C in a thermal chamber for 6 months. Indentation hardness, frictional tests and sliding wear measurements were conducted. A comparison between various materials was made. Descriptive statistics, degradation coefficients, H2E, Archard wear and specific wear rate were calculated. The Weibull statistical test for indentation hardness was performed and Hertzian contact stresses for the frictional association were calculated for unaged (M I, M II, M III, M V, M VI) and aged (M I AS, M II AS, M III AS, M V AS, M VI AS) samples. M I exhibited the lowest average hardness among the unaged materials, while M III AS had the lowest average hardness among the aged materials. Comparably low hardness was demonstrated by the M I AS material. The coefficient of friction values for the aged samples were found to be higher. The lowest wear value was demonstrated by the M I material. The wear resistance of most of the tested materials deteriorated after aging. The M VI AS material had the highest increase in wear. According to the results provided, not only the chemical composition and structure, but also aging have a great impact on the indentation hardness and wear resistance of the tested orthodontic materials.

15 February 2022 in Polymers
Verified
Journal Article
Open access
PDF file
JIJoanna Igielska-Kalwat
Joanna Igielska-Kalwat
Ewa Kilian - PiętaEwa Kilian - Pięta
Ewa Kilian - Pięta
SPSława Połoczańska-Godek
Sława Połoczańska-Godek
Chemically speaking, polymers are multi-molecular compounds that have specific physicochemical properties. Hair cosmetics utilize their ability to create a protective film and make the cosmetic formulation more viscous, which facilitates its application. Natural polymers are encountered in nature, but, in hair cosmetics, artificially modified ones are more often used. Unfortunately, artificially modified polymers are characterized by high resistance to biological factors, which creates an ecological problem. Another reason for a search for natural polymers is their milder action when compared to synthetic ones. One of the new sources of obtaining collagen is the waste connective tissue materials of aquatic animals—skins, spines, dorsal chords and scales, and swim bladders. These raw materials are most often disposed of in landfills, processed into fish meal, or destined for food for animals. The conducted research was aimed at proving the action of natural collagen in hair cosmetics as a substitute for synthetic polymers. In the patients using collagen laminate, it is possible to notice the complete elimination of excessive sebum production, restoration of the correct pH value, and reduction in skin inflammations.

12 September 2019 in Acta Biochimica Polonica
Verified
Journal Article
Open access
PDF file
JIJoanna Igielska-Kalwat
Joanna Igielska-Kalwat
MFMarcel Firlej
Marcel Firlej
ALAleksandra Lewandowska
Aleksandra Lewandowska
BBBarbara Danuta Biedziak
Barbara Danuta Biedziak
The cosmetic and pharmaceutical industry is constantly on the lookout for new and efficient active substances. In this article, we focus on resveratrol, an active substance with beneficial health properties, which is obtained, among others, from vines and knotweed (Reynoutria japonica). In this study, we assessed the level of skin hydration in a group of probands who used cream with or without resveratrol. The compound has been shown to have moisturizing and tightening properties, improving the overall condition of the skin.

25 October 2023 in Energies
Verified
Journal Article
Open access
PDF file
Andrzej ZiółkowskiAndrzej Ziółkowski
Andrzej Ziółkowski
Paweł FućPaweł Fuć
Paweł Fuć
Piotr LijewskiPiotr Lijewski
Piotr Lijewski
MBMaciej Bednarek
Maciej Bednarek
AJAleks Jagielski
Aleks Jagielski
JIJoanna Igielska-Kalwat
Joanna Igielska-Kalwat
Owing to society’s growing ecological awareness, researchers and car manufacturers have increasingly been focusing on the adverse impact of transport on the environment. Many scientific publications have been published addressing the influence of a variety of factors on the exhaust emissions generated by vehicles and machinery. In this paper, the authors present an analysis of the exhaust emissions of components such as CO, THC, and NOx in relation to the type and condition of the road surface. The analysis was performed on a heavy-duty truck designed for carriage of timber. The investigations were carried out with the use of the PEMS equipment (portable emission measurement system) on bitumen-paved roads and unpaved forest access roads. The portable measurement system allowed for an accurate determination of the influence of the road conditions on the operating parameters of the vehicle powertrain and its exhaust emissions. Additionally, the authors present the influence of the type of road surface on the vehicle fuel consumption calculated based on the carbon balance method.

13 August 2025 in Scientific Reports
Verified
Journal Article
Open access
JIJoanna Igielska-Kalwat
Joanna Igielska-Kalwat
MRMagdalena Rudzińska
Magdalena Rudzińska
AGAnna Grygier
Anna Grygier
DKDominik Kmiecik
Dominik Kmiecik
KCKatarzyna Cieślik-Boczula
Katarzyna Cieślik-Boczula
WSWojciech Smułek
Wojciech Smułek
Dipalmitoylphosphatidylcholine (DPPC) lipids were encapsulated in PEGylated liposomes with free stigmasterol (ST), stigmasterol myristate (ME), and stigmasterol oleate (OE). Their quality was assessed using TEM, zeta potential, and hydrodynamic diameter measurements. The liposomes were heated to 60 °C and 180 °C. The degradation of stigmasterol and fatty acids was considered, as was derivative formation. The results show that the liposomes fulfilled their intended function. The ST liposomes were smallest, while the ME liposomes were similar in size to the OE liposomes. The degree of degradation of the compounds encapsulated in the liposomes depended on their structure. After heating the samples to 60 °C, the extent of stigmasterol degradation ranged from 3.5% in ST to 4.3% in ME and 6.5% in OE. After heating to 180 °C, the lowest level of stigmasterol degradation was observed for OE (7.3%), while degradation in ST and ME reached 13.4% and 10.1%, respectively. The high level of oxyphytosterols in all samples heated to 180 °C raised concerns. The oxyphytosterol (SOP) content of the liposomes heated to 60 °C ranged from 23.2 mg/g in those with free stigmasterol to 6.3 mg/g and 6.4 mg/g in the liposomes with stigmasterol myristate and stigmasterol oleate, respectively. After heating to 180 °C, the total SOP content was significantly higher, ranging from 88.7 mg/g for OE to 7.4 and 29.6 mg/g for ME and ST, respectively.