The current practice in aluminum recycling plants is to change the waste into molten metal through the conventional recycling (CR) manufacturing process. However, the CR technique is so energy-intensive that it also poses an indirect threat to the environment. This paper presents a study on meltless direct recycling hot press forging (DR-HPF) as an alternative sustainable approach that has fewer steps with low energy consumption, as well as preventing the generation of new waste. A laboratory experiment was conducted to study the mechanical properties and surface integrity of AA7075 aluminum alloy by employing a hot press forging (HPF) process under different temperatures (380, 430, and 480 °C) and holding times (0, 60, and 120 min). It was found that as the parameter increased, there was a positive increase in ultimate tensile strength (UTS), elongation to failure (ETF), density, and microhardness. The recycled chips exhibit the best mechanical properties at the highest parameters (480 °C and 120 min), whereas the UTS = 245.62 MPa and ETF = 6.91%, while surface integrity shows that the calculated microhardness and density are 69.02 HV and 2.795 g/cm3, respectively. The UTS result shows that the highest parameters of 480 °C and 120 min are comparable with the Aerospace Specification Metals (ASM) Aluminum AA7075-O standard. This study is a guide for machinists and the manufacturing industry to increase industry sustainability, to preserve the earth for future generations.
25 January 2024 in International Journal of Technology
The influences of rare earth (RE) samarium (Sm) added contents to ZRE1 (Mg-Zn-Zr) magnesium (Mg) cast alloy over strength properties to be investigated. Sm at 0.5, 1.0, 1.5, and 2.0 wt.% were added separately as an alloying element to ZRE1 alloy. Optical Microscope (OM), X-ray powder diffraction (XRD), and scanning electron microscope Energy-dispersive X-ray (SEM/EDS) were used to investigate the microstructure of alloy, while mechanical properties investigated include Ultimate Tensile Strength (UTS)and Micro-Hardness (MH) tests. The result revealed that as the Sm level reached 1.5 wt.%, the grain size decreased by 20.9 %. Additionally, UTS and Yield Strength (YS) showed improvements of 8.5 % and 7.9 %, respectively, with the addition of 1.5 wt.% of Sm. In addition, elongation and hardness have been improved by 32.3 % and 10.9 % respectively at 1.5 wt.% Sm addition. Mg-Zn-Ce-Sm was formed as a new phase upon the addition of Sm and was detected via XRD analysis. The addition of Sm to the ZRE1 alloy had significant effects on the refinement of the material's microstructure, leading to an increase in its mechanical and physical properties. Therefore, the new ZRE1-RE magnesium alloy was developed.
The global shift towards miniaturization has positioned micro-manufacturing as a pivotal technology for national industrial advancement, particularly for emerging economies like Malaysia and the broader ASEAN region. This review paper comprehensively examines the concept of micro-manufacturing, delineating its distinction from conventional manufacturing processes and highlighting its inherent benefits. It delves into the transformative potential of micro-manufacturing across key industries, including electronics and semiconductors, medical devices, aerospace and Unmanned Aerial Vehicles (UAVs), automotive, and optoelectronics and photonics. Drawing upon specific examples, national initiatives, and economic implications, this paper illustrates how the strategic adoption and development of micro-manufacturing capabilities can elevate a nation’s technological prowess, foster high-value local industries, enhance export competitiveness, and create a significant multiplying effect across various sectors, thereby contributing to robust and sustainable economic growth. The discussion also incorporates real-world examples from Malaysia, demonstrating the tangible steps taken towards integrating micro-manufacturing into its national development agenda.