Ilya Galaktionov

Dr. Ilya Galaktionov

Quantum Center, Moscow Technical University of Communication and Informatics, Moscow, Moskva, Russia
orcid

Research Focus & Metrics

Academic Career Length

50Years (1977-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 October 2022 in Optics Express
Verified
Journal Article
Closed access
ASAlexander Soloviev
Alexander Soloviev
AKAlexander Kotov
Alexander Kotov
MMMikhail Martyanov
Mikhail Martyanov
SPSergey Perevalov
Sergey Perevalov
RZRoman Zemskov
Roman Zemskov
Efim KhazanovEfim Khazanov
Efim Khazanov
The use of the post-compression technique ensures gain in laser pulse peak power but at the same time degrades beam focusability due to the nonlinear wavefront distortions caused by a spatially nonuniform beam profile. In this paper a substantial focusability improvement of a post-compressed laser pulse by means of adaptive optics was demonstrated experimentally. The Strehl ratio increase from 0.16 to 0.43 was measured. Simulations showed that the peak intensity in this case reaches 0.52 of the theoretical limit.

22 January 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
VSVadim Samarkin
Vadim Samarkin
AAAlexander Alexandrov
Alexander Alexandrov
Ilya GalaktionovIlya Galaktionov
Ilya Galaktionov
Кудряшов Алексей ВалерьевичКудряшов Алексей Валерьевич
Кудряшов Алексей Валерьевич
ANAlexander Nikitin
Alexander Nikitin
Julia SheldakovaJulia Sheldakova
Julia Sheldakova
The bimorph deformable mirror with a diameter of 320 mm, including 127 control electrodes, has been developed and tested. The flatness of the initial mirror surface of about 1 μm (P-V) was achieved by mechanically adjusting the mirror substrate fixed in the metal mount. To correct for the aberrations and improve the beam focusing in the petawatt Ti:Sa laser, the wide-aperture adaptive optical system with the deformable mirror and Shack–Hartmann wavefront sensor was developed. Correction of the wavefront aberrations in the 4.2 PW Ti:Sa laser using the adaptive system provided increases the intensity in the focusing plane to a value of 1.1 × 1023 W/cm2

27 April 2022 in Photonics
Verified
Journal Article
Open access
PDF file
Ilya GalaktionovIlya Galaktionov
Ilya Galaktionov
ANAlexander Nikitin
Alexander Nikitin
Julia SheldakovaJulia Sheldakova
Julia Sheldakova
Vladimir ToporovskyVladimir Toporovsky
Vladimir Toporovsky
Кудряшов Алексей ВалерьевичКудряшов Алексей Валерьевич
Кудряшов Алексей Валерьевич
The rarely considered case of laser beam propagation and focusaing through the moderately scattering medium was researched. A phase-only spatial light modulator (SLM) with 1920×1080 pixel resolution was used to increase the efficiency of focusing of laser radiation propagated through the 5 mm layer of the scattering suspension of 1 µm polystyrene microbeads in distilled water with the concentration values ranging from 105 to 106 mm−3. A CCD camera with micro-objective was used to estimate the intensity distribution of the far-field focal spot. A Shack-Hartmann sensor was used to measure wavefront distortions. The conducted experimental research demonstrated the 8% increase in integral intensity and 16% decrease in diameter of the far-field focal spot due to the use of the SLM for laser beam focusing.

30 January 2017 in Quantum Electronics
Verified
Journal Article
Closed access
Ilya GalaktionovIlya Galaktionov
Ilya Galaktionov
Кудряшов Алексей ВалерьевичКудряшов Алексей Валерьевич
Кудряшов Алексей Валерьевич
YSYu V Sheldakova
Yu V Sheldakova
ABA A Byalko
A A Byalko
GBG Borsoni
G Borsoni

8 May 2022 in Photonics
Verified
Journal Article
Open access
PDF file
Vladimir ToporovskyVladimir Toporovsky
Vladimir Toporovsky
Кудряшов Алексей ВалерьевичКудряшов Алексей Валерьевич
Кудряшов Алексей Валерьевич
ASArkadiy Skvortsov
Arkadiy Skvortsov
ARAlexey Lvovich Rukosuev
Alexey Lvovich Rukosuev
VSVadim Samarkin
Vadim Samarkin
Ilya GalaktionovIlya Galaktionov
Ilya Galaktionov
In this work, two advanced technologies were applied for manufacturing a bimorph wavefront corrector: laser ablation, to vaporize conductive silver coating from piezoceramic surface, and parallel-gap resistance microwelding, to provide a reliable electrical contact between the piezodisk surface silver electrodes and copper wires. A step-by-step guide for bimorph mirror production is presented, together with the ‘bottlenecks’. Optimization of the laser ablation technique was carried out using an Nd:YAG laser with an output power of 4 W and a frequency of 20 kHz. A comparison of the ultrasonic welding and parallel-gap resistance microwelding methods was performed. The tensile strength in the first case was in the range of 0.2…0.25 N for the system ‘copper wire–silver coating’. The use of resistance welding made it possible to increase the value of this parameter for the same contact pair by almost two times (0.45…0.5 N).

2 December 2020 in Optics Express
Verified
Journal Article
Closed access
Ilya GalaktionovIlya Galaktionov
Ilya Galaktionov
Julia SheldakovaJulia Sheldakova
Julia Sheldakova
ANAlexander Nikitin
Alexander Nikitin
VSVadim Samarkin
Vadim Samarkin
VPVadim Parfenov
Vadim Parfenov
Кудряшов Алексей ВалерьевичКудряшов Алексей Валерьевич
Кудряшов Алексей Валерьевич
The rarely considered case when the optical radiation passes through the weakly scattering medium, e.g. mid-density atmospheric fog with the number of scattering events up to 10 was investigated in this paper. We demonstrated an improvement of focusing of a laser beam (λ=0.65 µm) passed through the 5 mm-thick layer of scattering suspension of 1 µm polystyrene microbeads diluted in a distilled water. For the first time the low-order aberration corrector – wide aperture bimorph deformable mirror with 48 electrodes configured in 6 rings was used to optimize a far-field focal spot. We compared efficiencies of the algorithm that optimized the positions of the focal spots on Shack-Hartmann type sensor and the algorithm that optimized the peak brightness and the diameter of the far-field focal spot registered with a CCD. We experimentally demonstrated the increase of the peak brightness of the far-field focal spot by up to 60% due to the use of the bimorph deformable mirror for beam focusing through the scattering medium with concentration values of scatterers ranged from 105 to 106 mm−3.