Three-dimensional laser scanning is a novel measurement technique that is frequently used for the documentation of cultural heritage (CH) objects. In the process of 3D scanning, one can obtain computing 3D models of artworks to be documented. It allows one to produce detailed digitized archives of important CH objects. Moreover, the use of 3D scanning enables the digital reconstruction of architectural fragments, sculptures, and other artworks. One more important application of this technique relates to the creation of molds and replicas for replacements of outdoor CH objects in case their preservation requirements do not allow them to remain in their original place due to the influence of environmental factors. One of the most effective ways of creating replicas is the use of laser additive technologies. Therefore, the combination of 3D scanning and additive technologies is a very promising way of preservation of CH. This paper describes several case studies concerned with the combined usage of 3D laser scanning and additive technologies for digital reconstruction and replication and of outdoor sculptures in St. Petersburg city. One of them is the reconstruction of the zinc sculpture “Eva at the fountain” (XIX century, England), which was destroyed during WWII. Its replica was created by means of laser stereolithography. Eventually, one more project is related to the reconstruction of the fragment of the sufficiently damaged cast-iron XIX century monument. This object was reconstructed using two laser technologies: direct metal laser sintering (DMLS), and laser cladding (LC).

The rarely considered case when the optical radiation passes through the weakly scattering medium, e.g. mid-density atmospheric fog with the number of scattering events up to 10 was investigated in this paper. We demonstrated an improvement of focusing of a laser beam (λ=0.65 µm) passed through the 5 mm-thick layer of scattering suspension of 1 µm polystyrene microbeads diluted in a distilled water. For the first time the low-order aberration corrector – wide aperture bimorph deformable mirror with 48 electrodes configured in 6 rings was used to optimize a far-field focal spot. We compared efficiencies of the algorithm that optimized the positions of the focal spots on Shack-Hartmann type sensor and the algorithm that optimized the peak brightness and the diameter of the far-field focal spot registered with a CCD. We experimentally demonstrated the increase of the peak brightness of the far-field focal spot by up to 60% due to the use of the bimorph deformable mirror for beam focusing through the scattering medium with concentration values of scatterers ranged from 10⁵ to 10⁶ mm⁻³.

The physicochemical processes that accompany laser cleaning of metallic objects with gilded surfaces have been investigated. The thermal processes have been numerically modeled, and experiments have been carried out on the cleaning of comparison surfaces made from gold, as well as of works of art made from gilded bronze, which showed the need to optimize the pulse width of the laser radiation. Using the successful solution of some difficult problems of restoration as an example, practical recommendations are given for choosing the output parameters of lasers intended for the cleaning of gilded bronze.

We examine the physical and chemical processes occurring on the surfaces of copper and copper-alloy objects that are laser-cleaned using a Smart Clean 2 (El. En., Italy) pulsed YAG:Nd laser and a commercial MiniMarker2 M20 ytterbium pulsed fiber-optic laser, both with emission wavelengths of 1064 nm. We show that discoloration of the copper surface can be mitigated by performing the laser treatment in a nitrogen atmosphere.