Jaehun Lee

Prof. Jaehun Lee

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 November 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
Jaehun LeeJaehun Lee
Jaehun Lee
JPJi-Seon Paek
Ji-Seon Paek
SHSongcheol Hong
Songcheol Hong
This article presents two millimeter-wave frequency reconfigurable dual-band CMOS power amplifiers (PAs) for fifth-generation (5G) communications comprising a single-stage dual-band PA and a two-stage dual-band PA for higher gain. The PAs cover multiple 5G communication bands, n257 (26.5–29.5 GHz) and n260 (37–40 GHz), which use reconfigurable transmission line transformers (TLTs) for output, input, and interstage matching networks. These matching networks allow the operating frequency bands to be changed, thereby achieving optimum performance. The integrated mode selection switches in the transformers reconfigure the inductances of the TLTs to cover two frequency bands, which allows the PAs to have small overall chip sizes. These are fabricated in a 28-nm bulk CMOS process. The single-stage dual-band PA achieves 20.2-/19.1-dBm saturated output power ( ${P}_{\text {sat}}$ ), 18.7-/18.6-dBm 1-dB compressed output power ( ${P}_{\text {1 dB}}$ ), and 33.6%/32% peak power-added efficiency (PAE) at 26.5 and 37 GHz, respectively, while occupying a chip area of 0.11 mm 2 . The two-stage dual-band PA achieves 19.1-/19.5-dBm ${P}_{\text {sat}}$ , 17-/17.8-dBm ${P}_{\text {1 dB}}$ , and 31.3%/30.5% PAE at 26.5 and 37 GHz, respectively, while occupying a chip area of 0.165 mm 2 . Both PAs are tested under 64-quadrature amplitude modulation signals with a 100-MHz channel bandwidth. The single-stage PA achieves 14.7- and 12.3-dBm average output powers ( ${P}_{\text {avg}}$ ) with −25.1- and −25-dB error vector magnitudes (EVMs) at 26.5 and 37 GHz, respectively. The two-stage PA achieves 12.3- and 11.6-dBm ${P}_{\text {avg}}$ ’s with −25.3- and −25.1-dB EVMs at 26.5 and 37 GHz, respectively.

9 November 2020 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
Jaehun LeeJaehun Lee
Jaehun Lee
SHSongcheol Hong
Songcheol Hong
A two-stage 24-30 GHz wideband power amplifier (PA) with an adaptive capacitance linearizer is presented, which is fabricated using a 28-nm bulk CMOS process. Staggered input gain matchings of the driver and power stages are implemented with wideband output power matchings to achieve wideband power characteristics. An adaptive capacitance linearizer is introduced at the power stage input to improve the AM-PM linearity with respect to input powers. At 24/26/28/30 GHz, it achieves 19.7/20.3/20/20 dBm P sat , 18.2/18.2/17.8/17.2 dBm P 1dB , and 34.5/33.1/30/30.3% peak power added efficiency (PAE). The small-signal gain of 21.2 dB and the 3-dB bandwidth of 8.2 GHz are achieved. It has a core size of 0.189 mm 2 .

27 July 2026 in Electronics
Verified
Journal Article
Open access
PDF file
Jaehun LeeJaehun Lee
Jaehun Lee
ESEun-Taek Sung
Eun-Taek Sung
DLDong-Ho Lee
Dong-Ho Lee
Gwanghyeon JeongGwanghyeon Jeong
Gwanghyeon Jeong
SHSongcheol Hong
Songcheol Hong
This paper presents a frequency-reconfigurable dual-band phase shifter operating in the n257 (26.5–29.5 GHz) and n260 (37–40 GHz) bands for fifth-generation (5G) communication. The proposed phase shifter is based on an active vector-summing architecture and provides simultaneous gain and phase control for beamforming applications. To support dual-band operation with a large frequency separation, a reconfigurable RC–RL polyphase filter (PPF) is employed for in-phase/quadrature (I/Q) signal generation. The proposed PPF reconfigures its inductance and capacitance according to the operating band, reducing insertion loss and minimizing I/Q phase error in both frequency bands. Gain and phase are controlled by digital-to-analog converter (DAC)-assisted vector summation with 4-bit gain and 6-bit phase control resolution, while a reconfigurable output matching network provides optimized impedance matching in each operating mode. The phase shifter is implemented in a 28 nm fully depleted silicon-on-insulator (FDSOI) process with a core area of 0.26 mm2. The measured RMS phase errors are <1.18° and <1.5°, and the RMS gain errors are <0.26 dB and <0.35 dB in the n257 and n260 bands, respectively. The measured DC power consumption is 11 mW and 15.4 mW in the n257 and n260 bands, respectively.

23 May 2026 in Electronics
Verified
Journal Article
Open access
PDF file
SJSEONGHUN JO
SEONGHUN JO
ishath harshika hewa maddumageishath harshika hewa maddumage
ishath harshika hewa maddumage
Jaehun LeeJaehun Lee
Jaehun Lee
Gwanghyeon JeongGwanghyeon Jeong
Gwanghyeon Jeong
DLDong-Ho Lee
Dong-Ho Lee
This paper presents the design and fabrication of a wideband low-noise amplifier (LNA) covering C-band, using the 0.15 µm GaAs pHEMT process. To achieve both low noise performance and wide matching characteristics, a two-stage cascaded architecture is implemented. In the first stage, circular inductors and an inductive source degeneration technique are employed to minimize the noise figure (NF) while ensuring wideband input matching. Furthermore, an RC feedback structure is incorporated to effectively enhance the stability of the amplifier. The proposed LNA operates under a supply voltage of 3.3 V and a gate bias of 0.35 V, with a total DC power consumption of 69.3 mW. The fabricated MMIC occupies a total chip area of 1.98 mm2, including the probing pads. Measurement results demonstrate that the LNA achieves an NF of 0.81–1.09 dB and a gain of over 20.1 dB in the frequency range of 3.3–8.0 GHz. The input and output return losses are maintained over 10 dB and 9.7 dB, respectively.

14 July 2026 in Electronics
Verified
Journal Article
Open access
PDF file
JKJeongheon Kim
Jeongheon Kim
Jaehun LeeJaehun Lee
Jaehun Lee
JKJunhyung Kim
Junhyung Kim
DKDongmin Kang
Dongmin Kang
DLDong-Ho Lee
Dong-Ho Lee
Gwanghyeon JeongGwanghyeon Jeong
Gwanghyeon Jeong
This paper presents an adaptive combining power amplifier (PA) implemented in the ETGaN15 process. The proposed architecture eliminates the λ/4 impedance transformers required in conventional back-off efficiency enhancement techniques, employing instead a combining network composed solely of microstrip lines and capacitors. The proposed circuit dynamically performs load modulation and power combining according to the input power level, simplifying the overall impedance matching structure while improving efficiency in the output back-off region. The measurement results demonstrate a small-signal gain of 8 dB and a peak output power of 34 dBm across the 10 GHz band. The PA achieves a peak power-added efficiency (PAE) of 28% and a peak drain efficiency (DE) of 41%, while maintaining a PAE of 23% and a DE of 28% at a 6-dB output power back-off (OBO).

16 October 2026 in Electronics
Verified
Journal Article
Open access
PDF file
ishath harshika hewa maddumageishath harshika hewa maddumage
ishath harshika hewa maddumage
JLJiyoung Lee
Jiyoung Lee
Jaehun LeeJaehun Lee
Jaehun Lee
Gwanghyeon JeongGwanghyeon Jeong
Gwanghyeon Jeong
DLDong-Ho Lee
Dong-Ho Lee
This paper presents a 6–11 GHz monolithic microwave integrated circuit (MMIC) low-noise amplifier (LNA) with an integrated input limiter for broadband microwave receiver protection. The proposed limiter–LNA employs a three-stage common-source topology and an anti-parallel diode pair at the radio frequency (RF) input, and it is fabricated using a 0.25 μm GaAs pHEMT process. The limiter–LNA achieves a gain of 24.6–28.0 dB and a noise figure of 1.19–1.80 dB while consuming 34 mA from a 3.0 V supply in measurement. Its saturated output power is 12–13 dBm, with input and output third-order intercept points of −8 and 20 dBm, respectively. To evaluate the effect of the integrated limiter, the measurement results are compared with those of a standalone LNA employing the same amplifier topology. The main contribution is the realization of a favorable trade-off between limiter simplicity and broadband LNA performance using only a simple anti-parallel Schottky-diode pair, together with a direct experimental evaluation of the limiter-induced performance penalty and protection benefit. The comparison shows that the limiter introduces only a minor noise-figure penalty. High-input-power testing showed that the maximum input-power level without permanent characteristic changes increased from approximately 24 dBm for the standalone LNA to 29 dBm for the limiter–LNA. These results demonstrate that the integrated limiter improves the input-power survivability of the LNA while preserving its broadband gain and low-noise performance. The fabricated limiter–LNA occupies a chip dimension of 1.222 × 1.200 mm2.