Jamal Alsawalhi

Dr. Jamal Alsawalhi


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 November 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HNHoach The Nguyen
Hoach The Nguyen
Jamal AlsawalhiJamal Alsawalhi
Jamal Alsawalhi
KHKhalifa Al Hosani
Khalifa Al Hosani
AAAmeena Alsumaiti
Ameena Alsumaiti
Khaled Ali Al JaafariKhaled Ali Al Jaafari
Khaled Ali Al Jaafari
MMMohamed Shawky El Moursi
Mohamed Shawky El Moursi
This article proposes a review map for comparative designs of wireless high-power transfer (WHPT) systems using single- and double-resonance blocks. In-depth analyses and key guidelines are provided to design high-efficiency WHPT systems while keeping zero-phase-angle/unity-power-factor and constant - current/voltage supply to the load. Basic single- and double-resonance blocks based on LC- resonant circuits are analyzed. Then, resonant S- and T- blocks are recommended as the best transmission blocks for competitive designs. The proposed approach is applied to map recent developments on the wireless charging technologies for electric vehicles (EVs), especially for weak-coupling systems and dynamic-charging technologies. The proposed design approach offers a systematic and effective methodology to quickly evaluate current technologies and solutions for WHPTs in EVs applications. In extension, this article indicates different control strategies for WHPTs, especially for optimal-efficiency tracking. Design guidelines and control strategies are provided to achieve the maximum efficiency at a standard resonance frequency against variations from loads and coupling coefficients in operation which can easily map to recent research works and future research directions. Experimental verifications of dominant designs are also presented to validate the proposed approach. The map for comparative designs and control structures presented in this article aims to serve as a guideline and to ease the initial steps for other researchers in this area.

28 May 2020 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Open access
UMUtkal Ranjan Muduli
Utkal Ranjan Muduli
Balanthi Abdul BeigBalanthi Abdul Beig
Balanthi Abdul Beig
Khaled Ali Al JaafariKhaled Ali Al Jaafari
Khaled Ali Al Jaafari
Jamal AlsawalhiJamal Alsawalhi
Jamal Alsawalhi
RBRanjan Kumar Behera
Ranjan Kumar Behera
This article presents a new open-end winding induction motor (OEWIM)-based dual-motor differential four-wheel drive (D4WD) for the electric vehicle (EV). Constant speed operation through cruise control is achieved using direct torque control (DTC) algorithm. The redundant vectors are used in the switching vector selection of the DTC algorithm to achieve balanced battery currents. Fault-tolerant operation (FTO) of the drive is demonstrated, where the EV will work with full torque even if one of the inverters in rear motor drive or front motor drive or both fail. The dynamic model of the proposed drive is presented. The proposed drive and FTO are verified through simulation as per the FTP-75 driving cycle. An experimental prototype of the proposed drive is developed, and the abovementioned algorithms are verified experimentally as per the FTP-75 and HFET driving cycles. Both the simulation and experimental results are presented, and these results agree with the theoretical observations. Stable operation of EV for the entire test cycle under normal operation, as well as inverter fault conditions, is demonstrated.

29 June 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Open access
UMUtkal Ranjan Muduli
Utkal Ranjan Muduli
Balanthi Abdul BeigBalanthi Abdul Beig
Balanthi Abdul Beig
RBRanjan Kumar Behera
Ranjan Kumar Behera
Khaled Ali Al JaafariKhaled Ali Al Jaafari
Khaled Ali Al Jaafari
Jamal AlsawalhiJamal Alsawalhi
Jamal Alsawalhi
For high-power electric vehicles (EVs), the drive propulsion based on induction motors is emerging as economical alternative. Compared to conventional induction motors, the open-end winding induction motor (OEWIM) requires only half the dc-bus voltage for the given torque. The EV power train based on the dual two-level voltage-source inverter (VSI)-fed OEWIM with isolated dc sources is used in this research. For uniform state-of-charge (SoC) distribution, the power flow from each isolated source needs to be controlled. A two-stage model-predictive direct torque control (MPDTC) scheme is proposed to balance the SoC of batteries by proper selection of the VSI voltage vectors. The proposed MPDTC scheme is free from weighting factor tuning and uses a ranking method to predict the optimal voltage vectors. The superiority of the proposed controller in terms of battery SoC balancing is demonstrated. The performance of the proposed MPDTC EV drive is verified for the FTP75 and HFET driving cycles under different operating conditions, both by simulation and hardware experimental tests.

2 June 2016 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Open access
Jamal AlsawalhiJamal Alsawalhi
Jamal Alsawalhi
SSScott D. Sudhoff
Scott D. Sudhoff
This paper sets forth a design paradigm for a permanent magnet synchronous machine (PMSM) architecture that employs rotational asymmetry to obtain an improved constant power speed range performance and increased torque density. A population-based multiobjective optimization design approach is used to design the new machine topology and compare it to a conventional symmetrical surface mounted PMSM. Results obtained demonstrate that improved performance is attainable with the asymmetrical design. Validation of the results is carried out by means of three-dimensional finite element analyses.

17 April 2019 in IEEE Transactions on Sustainable Energy
Verified
Journal Article
Closed access
RCRajasekhara Reddy Chilipi
Rajasekhara Reddy Chilipi
NSNaji Al Sayari
Naji Al Sayari
Jamal AlsawalhiJamal Alsawalhi
Jamal Alsawalhi
This paper deals with the control of single-phase grid-tied solar photovoltaic (SPV) power generation system with an universal active power filter (UAPF) capabilities. The SPV-UAPF system consists of series and shunt voltage source inverters (VSIs). The shunt VSI exports the real power extracted from the PV panels to the grid and local loads. In addition to handling the real power, the shunt VSI provides compensation of reactive and harmonic currents generated by the loads. The reference signals required for the control of the shunt and series VSIs of the SPV-UAPF system are estimated using least mean mixed norm (LMMN) adaptive identification algorithm. The performance of the LMMN-based control of SPV-UAPF system with series shunt compensation capabilities is demonstrated using MATLAB/Simulink-based computer simulations and hardware-in-the-loop based experimental results under various operating conditions such as solar irradiance variation, voltage sag, swell and current harmonics.

17 May 2022 in IEEE Access
Verified
Journal Article
Open access
AAAnish Ahmad
Anish Ahmad
MRMotiur Reza
Motiur Reza
Balanthi Abdul BeigBalanthi Abdul Beig
Balanthi Abdul Beig
Jamal AlsawalhiJamal Alsawalhi
Jamal Alsawalhi
Khaled Ali Al JaafariKhaled Ali Al Jaafari
Khaled Ali Al Jaafari
The DC-DC converters are the essential modules in electric vehicles, grid interface of renewable energy sources and DC power supplies. This paper presents a novel high gain bidirectional switched Z-source DC-DC converter. The proposed bidirectional converter utilizes a switched-capacitor concept with inductors for high voltage gain. The proposed bidirectional converter has high voltage conversion ratio over a wide duty cycle range in both the boost and buck modes of operation. It has common ground between input and output, and uses only 5 active switches and 4 passive elements with reduced switch voltage stress. The current drawn from the low voltage side input source is continuous with reduced ripple. The operating principle, circuit analysis, design, mathematical model and closed-loop operation of the proposed converter are presented. The proposed converter is verified through computer simulation and laboratory experiments. The simulation and experimental results are presented.