Jiaojiao Pan

Dr. Jiaojiao Pan

Xijing University, Xi'an, China
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 October 2022 in Materials
Verified
Journal Article
Open access
PDF file
TLTao Luo
Tao Luo
XPXiaofeng Pan
Xiaofeng Pan
LTLiyun Tang
Liyun Tang
Qiang SunQiang Sun
Qiang Sun
JPJiaojiao Pan
Jiaojiao Pan
Concrete presents different internal micro-structure and damage characteristics because of the different content of steel fibers and the randomness of its distribution. Therefore, the failure process of steel-fiber-reinforced concrete (SFRC) should be divided into different stages and the damage types should be classified to further clarify the strengthening mechanism of steel fibers. The role of volume fractions of steel fibers in the splitting-tensile strength of concrete was investigated by split tensile tests for concrete with four different volume fractions of steel fibers (0.0%, 1.0%, 1.5%, 2.0%). The acoustic emission energy and horizontal displacement of concrete in the splitting-tensile process were monitored by combing digital image correlation (DIC) and acoustic emission (AE) techniques, and the microscopic failure mechanism of SFRC was analyzed emphatically. The results showed that the addition of steel fibers improved the splitting-tensile strength of concrete. With the increase of the volume fraction of steel fibers, the splitting-tensile strength of concrete increased first and then decreased, and reached the maximum value of 5.294 MPa when the content was 1.5%. It was observed that the overall failure mechanism could be divided into four stages: slow accumulation of elastic energy (I); rapid accumulation of elastic energy (II); rapid accumulation of dissipated energy (III); a slow decrease of elastic energy and a slow increase of dissipated energy (IV). Tensile failure dominated the failure process of concrete splitting-tensile resistance, while there was a part of shear failure.

1 January 2018 in Advances in Civil Engineering
Verified
Journal Article
Open access
MDMingke Deng
Mingke Deng
JPJiaojiao Pan
Jiaojiao Pan
XLXingwen Liang
Xingwen Liang
It has been widely recognized that the constitutive model plays an essential role in engineering application of high ductile fiber‐reinforced concrete (HDC). In this research, uniaxial compressive tests were conducted on nine groups of HDC specimens with different mixture ratios and one group of mortar matrix specimens as comparison, discussing the effect of fiber content, water‐cement ratio, fly ash content, and sand‐binder ratio. According to the characteristics of stress‐strain curve of HDC under uniaxial compression, a damage constitutive model was proposed by introducing two damage threshold parameters and then was compared with other existing models. Results indicated that the damage model curves suggested in this paper were best consistent with experimental curves and substantially demonstrate the damage evolution process as well as the cracking resistance effect of fiber bridging stress.

14 July 2021 in Structural Concrete
Verified
Journal Article
Closed access
PDF file
JPJiaojiao Pan
Jiaojiao Pan
MDMingke Deng
Mingke Deng
HSHongzhe Sun
Hongzhe Sun

27 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
JPJiaojiao Pan
Jiaojiao Pan
TLTingting Lu
Tingting Lu
MDMingke Deng
Mingke Deng
In order to investigate the bond degradation mechanism and constitutive relationship of ribbed steel bars in engineered cementitious composites (ECCs) under cyclic loading, 12 groups of specimens were tested in this paper. The design parameters included ECC compressive strength, ECC flexural toughness, cover thickness, and anchorage length. The results indicated that the degradation of the bond behavior of the ribbed steel bars in the ECCs under cyclic loading was mainly caused by the degradation of the properties of the ECC material itself, concentrating on the development of cracks in the ECC, the extrusion and shear failure of the ECC between the steel bar ribs, and the continuous grinding of the ECC particles on the shear failure surface. The degradation of the bond stress–slip curves under cyclic loading was mainly reflected by the degradation in the ultimate bond strength and unloading stiffness. According to the monotonic loading test results, a monotonic bond stress–slip relationship model was proposed. On this basis, through building the hysteretic rules of the bond stress–slip curves under cyclic loading, a calculation model was proposed to predict the bond stress–slip constitutive relationship between the ribbed steel bars embedded in the ECCs under cyclic loading. Finally, the validity of the proposed model was verified by a comparison between the model curves and the tested curves.

12 August 2021 in Geofluids
Verified
Journal Article
Open access
PDF file
YYYiran Yang
Yiran Yang
YLYanzhong Li
Yanzhong Li
JPJiaojiao Pan
Jiaojiao Pan
TLTao Luo
Tao Luo
ZLZidong Lu
Zidong Lu
The hazards induced by stratified rock mass creep are still one of the major problems that threaten the safety of underground engineering. This paper takes safe construction of underground roadway in Urumqi mining area as the research background. In this study, we mainly adopted rock mechanics experiments to accomplish the research on creep behavior and crack evolution of stratified structural sandstone. Creep deformation characteristics of stratified structural sandstone under different load were revealed; also, we analyzed the reason why a part of rock samples failed but others were not under the same load. Creep behavior and crack evolution of rock samples without stratified structure have significant randomness. The crack evolution and failure characteristics of stratified structural rock samples were mainly manifested as failure along and cutting through structural plane and their combined forms. Creep strain, creep duration, and creep rate of rock samples with stratified structure had a nonlinear relationship with applied load, such as exponential function or logarithmic function. Understanding the evolutionary relationship between the above parameters and load provides a basis for obtaining the creep behavior of stratified rock mass under different load conditions.

19 July 2024 in Buildings
Verified
Journal Article
Open access
PDF file
JPJiaojiao Pan
Jiaojiao Pan
ZHZhenbin Huang
Zhenbin Huang
TLTingting Lu
Tingting Lu
MDMingke Deng
Mingke Deng
Due to their excellent ductility and crack-control ability, engineered cementitious composites (ECCs) combined with shaped steel can produce steel-reinforced engineering cementitious composite (SRECC) structures which exhibit significant advantages in prefabricated buildings. The interface bond behavior is the base for the cooperative working performance of the shaped steel and ECC. This study included push-out tests of one ordinary concrete control specimen and ten ECC specimens. The various parameters were the ECC compressive strength, fiber volume content, cover thickness, and the embedded length of shaped steel. The bond stress–slip curves at the loading and free end were obtained, and the effects of various parameters on the characteristic points of curves were analyzed. The results indicated that the ordinary concrete specimen failed in brittle splitting, with the cracks completely penetrating the surface of the specimen. Due to the fiber-bridging effect in ECCs effectively preventing the development and extension of cracks, the shaped steel at the free end was obviously pushed out, and the surrounding matrix maintained good integrity after testing finished. For ECC specimens, bond or splitting-bond failure occurred, exhibiting outstanding ductility. Compared with the ordinary concrete specimen, the standard ultimate and residual bond strength of ECC specimens improved by 37.9% and 27.4%, respectively. Besides the increase in ECC compressive strength, the fiber volume content and cover thickness had a significant positive influence on the ultimate and residual bond strength, whereas the effect of the embedded length was the opposite. Finally, the calculation equations of characteristic bond strength were proposed, and the calculated values matched well with the experimental values.