This paper introduces a machine vision-based system promising low-cost solution for detecting a fatigue crack propagation caused by alternating mechanical stresses. The fatigue crack in technical components usually starts on surfaces at stress concentration points. The presented system was designed to substitute a strain gauge sensor-based measurement using an industrial camera in cooperation with branding software. This paper presents implementation of a machine vision system and algorithm outputs taking on fatigue crack propagation samples.
This paper deals with usage of single-chip computers for controlling MIMO systems. The aim is to design a general control system, which is easy to use and easy to implement for other MIMO systems. The performance of control system is limited by the performance of used MCU (PIC 16F876A) and its peripherals (2×PWM, 8×A/D, MAC, ...). The key tasks of MCU are communication with upper level and implementation of required control action together with data collection. The serial interface provides communication between control system (PC) and MCU. SCADA/HMI system monitors a controlled system. The application is accessible via Internet browser in local area network (LAN).
This paper deals with an application of two degrees of freedom controller (2DOF) on a controlled system. The control system is based on a single-chip microcontroller (MCU). The communication is provided by the serial interface which is between an industrial personal computer (IPC) and MCU. The controlled system is monitored and controlled by SCADA/HMI system. The PI 2DOF controller is designed for DC motor. The achieved results confirm theoretical assumption about process quality.
The transfer of graphics to a product’s surface is a widely known technology. Printing, engraving, and etching are used every day in production processes with countless types of materials. This paper deals with quality control for laser engraving on surfaces with variable dimensions via optical sensors. The engraving process, apart from colour changes, can induce volume and moisture changes, which lead to dimension changes in some materials. Natural materials and biomaterials are among the ones most affected. Combined with the porous and inhomogeneous structure of such a material, it can be difficult to measure the quality of graphic transfer, especially for shaded products. The quality control of laser-engraved photographs on thin layers of wood veneer was selected as a suitable problem to solve. A complex method for the quality measurement of the specified production was designed and tested. We used an affine transformation to determine the system behaviour and to determine the transfer function of material changes during the production process. Moreover, there is a possibility to compensate the image deformation of the engraved product.
This paper deals with usage of single-chip computers for collection of data and control. The aim is to design a general control system, which is easy to use and easy to implement for other laboratory tasks. Performance of control system is limited by performance of used MCU (PIC 16F873A) and its peripherals (2xPWM, 5xA/D...). Main task of MCU are communication with upper level and implementation of required control action together with data collection. Communication between control system (IPC) and MCUs is provided by serial interface. In the first step control system defines initialization of MCU (reset needed) for desired laboratory task then continues with the control application. Everything is controlled and monitored from SCADA/HMI system called Control Web. Application is accessible via Internet browser in local network.
This paper demonstrates a signal processing approach designed to overlay data sets measured using two optical micrometers. Two sensors are used in order to measure object's shape, but measured signals are relatively shifted, because it is impossible to mount sensors into the same position. Covariance method are applied to measurement data and the shift between these sets are evaluated.