This paper deals with the analysis of a suitable compensation topology of a wireless power transmission system for powering the rotating parts of modern automatic machine tools. It summarizes the important properties of the serio-parallel compensation topology suitable for this application and demonstrates a detailed mathematical derivation using the first harmonic approximation. The paper details the industrial implementation of the system in a specific automatic machine tool application and demonstrates the strong technical advantages of the proposed design. Important theoretical conclusions and technical assumptions made when considering the system layout are verified by experimental laboratory measurements and the final deployment of the technology in the professional tool DMU 40 eVo linear.
This study addresses the premature failure of electric motor bearings caused by inverter-induced parasitic currents. We propose a novel segmented end shield design utilizing 24 carbon fiber-reinforced polymer (CFRP) lamellae to provide both structural support and galvanic isolation. The “main working” of the design relies on a segmented architecture where the lamellae are adhesively bonded between a central bearing housing and an outer mounting flange, creating a high-impedance path that interrupts circulating currents. Experimental validation focused on both mechanical stability and dielectric performance. Results indicate that the assembly maintains rotor positional integrity under nominal loads while providing an insulation resistance > 1 GΩ at 1 kV and a structural capacitance of 2.47 nF. These parameters effectively mitigate low-frequency circulating currents. Data analysis, derived from the mean values of repeated test cycles, confirms that the composite architecture serves as a viable, mechanically robust alternative to conventional metallic end shields.
The article describes an advanced test stand for measuring temperatures during the 3D printing for additive manufacturing. Based on mathematical procedures, it analyzes the impact energy of the laser beam used in metal 3D printing.