Yaohui Liu

Dr. Yaohui Liu

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 August 2025 in Materials
Verified
Journal Article
Open access
PDF file
XHXiangyang Hou
Xiangyang Hou
WSWei Sun
Wei Sun
YCYongle Chen
Yongle Chen
XYXiaoli Yi
Xiaoli Yi
YLYaohui Liu
Yaohui Liu
LLLulu Liu
Lulu Liu
Green and low-carbon filling materials, primarily composed of dredged waste fills, are commonly used in the foundation of coastal highways. These materials possess high water content and under-consolidation characteristics, which can lead to differential settlement between piles and the surrounding environment. However, mechanical models of negative friction in piles within recycled dredged waste fills are insufficiently developed and presented. A mechanical model for the negative friction of a single pile in a composite foundation, consisting of dredged waste fills and other materials, is established based on the load transfer method. Through centrifugal model testing and numerical simulations, the development of negative friction and the migration pattern of the neutral point are analyzed and clarified. The results show that the theoretical model based on improved transfer function can effectively predict the neutral point position and negative friction value (average relative error < 6.5%). The theoretical analysis and experimental results indicate that the downward load due to negative friction increases nonlinearly. The loading strength exhibits a clear relationship with the consolidation process. Additionally, the dynamic evolution of the neutral point position is strongly correlated with consolidation of dredged fills. The size of pile foundation significantly influences the distribution of negative friction. Results show that the increment in negative friction for a pile with a 1.05 m diameter is 7.3% higher than that for a pile with a 1.5 m diameter. Smaller-diameter piles are more susceptible to negative friction due to the higher friction strength per unit area. The negative frictional resistance will enter a stable period after 50 months of settlement. The investigation can provide significant references for the design of pile foundations in areas with reclaimed materials, improving the stability and safety of pile foundations in practical engineering.

19 September 2025 in Frontiers in Earth Science
Verified
Journal Article
Open access
PDF file
JXJinglan Xing
Jinglan Xing
XHXiaochuan Han
Xiaochuan Han
JBJinliang Bai
Jinliang Bai
YLYaohui Liu
Yaohui Liu
LLLemin Liu
Lemin Liu
QLQinggang Li
Qinggang Li
Grouting is a widely used method for addressing the issue of karst caves in geotechnical engineering. However, the extent and reinforcement effectiveness of grout after injection remain unclear in practical applications. To evaluate the grouting effect in karst caves, time-lapse seismic full waveform inversion (FWI) was employed in a series of field tests in Guizhou Province. The FWI results indicate that the horizontal range of the cave extends from 15 m to 25 m, with a depth range of 6 m–12 m. These findings are consistent with the drilling results, which show a burial depth of 6.2 m–12.4 m. The experimental results demonstrate that FWI can accurately determine the location and size of karst caves. The dispersion energy image of surface waves provides valuable input for the initial FWI model. The karst cave was also detected after grouting, and a wave velocity difference map was obtained. The results suggest that time-lapse FWI is more effective than direct inversion in eliminating the influence of the surrounding environment and highlighting changes in the slurry. The solidification range of the slurry after the second grouting closely matches the shape of the karst cave, suggesting that the cave has been completely filled with slurry. This conclusion is further supported by the drilling and subsequent construction results. Additionally, a comparison of the S-wave and P-wave inversion results shows that S-waves velocity models are more accurate than P-wave ones. These findings provide valuable insights for grouting detection in practical engineering applications.

29 January 2026 in Minerals
Verified
Journal Article
Open access
PDF file
YZYanming Zhao
Yanming Zhao
LHLu Han
Lu Han
WGWeiliang Gao
Weiliang Gao
JZJinpeng Zhao
Jinpeng Zhao
YLYaohui Liu
Yaohui Liu
Tailings sand primarily consists of fine sand, silt, and other non-cohesive soil particles. Due to its persistent saturation, it exhibits a high susceptibility to liquefaction under dynamic loading or fluctuating groundwater conditions, potentially leading to engineering failures such as foundation instability and slope failure. This study focuses on a representative tailings pond located in the northwest region of China. A series of geotechnical laboratory tests were conducted to investigate the fundamental physical and mechanical properties of tailings sand. The test results indicate that moisture content increases gradually with depth and stabilizes beyond a certain depth, while dry density decreases approximately linearly with increasing depth. Owing to the presence of certain metallic minerals, the specific gravity of tailings sand materials is slightly higher than that of conventional standard sand. Particle-size analysis reveals that the non-uniformity coefficient ranges from 2.04 to 3.1, and the coefficient of curvature varies between 0.72 and 0.97, indicating poor gradation. Compaction testing determined an optimum moisture content of 13.59%, corresponding to a maximum dry density of 1.868 g/cm3. Soil-water characteristic curve analysis shows that larger particle sizes are associated with enhanced drainage capacity and lower suction requirements. An increase in dry density significantly reduces the drainage rate but has a limited effect on the matric suction at the residual stage. This research provides valuable insights into the engineering behavior of tailings sand, supports the assessment of its performance in foundation applications, and offers practical guidance for the stabilization of and improvement in tailings sand foundations.

27 August 2024 in Lithosphere
Verified
Journal Article
Open access
YLYaohui Liu
Yaohui Liu
SLShuchen Li
Shuchen Li
LLLuoning Li
Luoning Li
ZLZhen Li
Zhen Li
Karst cave causes geological disasters in tunneling engineering, which brings great risks to subway construction. The microtremor survey has become one of the main methods for karst cave detection in urban areas due to its convenience and great detection depth. However, the microtremor survey lacks high-frequency signals, resulting in poor detection accuracy on the shallow layer. An advanced method called mixed-source surface wave (MSW) method is proposed by imposing active sources during the continuous passive surface wave survey. MSW is applied to the detection of beaded karst caves (i.e. two or three karst caves at different depths in the same location) in Ji'nan, China. The influences of ambient noise, array type, and other factors on the detection accuracy were studied. Experimental results show that the detection depth and accuracy of MSW are much better than those of passive surface wave method. The inversion accuracy of linear array perpendicular to road is better than the triangle array and L-shaped array. The accuracy of the linear array along the road is worst. The detection accuracy of MSW is similar to that of combined active–passive surface wave methods. However, the basic principle of MSW is easier to understand, and its operation is more convenient. The two-dimensional measurement results show that the MSW method can well reflect the size and location of the beaded karst cave and provide important references for the practical engineering.

28 April 2024 in Materials
Verified
Journal Article
Open access
PDF file
YLYaohui Liu
Yaohui Liu
TJTao Jiang
Tao Jiang
With the wide application of graphene oxide nanoparticles (GONPs), a great amount of GONP waste is discarded and concentrated in landfills. It has been proven that GONPs have strong toxicity and could gather toxic substances due to their high adsorption capacity. GONPs will seriously pollute the surrounding environment if they leak through the geosynthetic clay liner (GCL) in landfills. To investigate various factors (temperature, ionic strength (IS) and humic acid (HA)) on the transport and retention of GONPs in the GCL, a self-designed apparatus was created and column tests were carried out. The experimental results show that GONPs could be transported through the GCL. The mobility and sorption ratio of GONPs in GCL decreased with an increase in temperature and IS, and increased with an increase in HA. The temperature had little effect on the deposition ratio of GONPs in the GCL. The deposition ratio of GONPs in the GCL increased with IS, and decreased with an increase in HA. The transport of GONPs in GCL, glass beads and quartz sand was compared, and the results show that the retention ability of the GCL is much better than other porous materials. The experimental results could provide significant references for the pollution treatment in landfills.

10 June 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CQChuanqi Qu
Chuanqi Qu
SLShuchen Li
Shuchen Li
YLYaohui Liu
Yaohui Liu
Zeen WANZeen WAN
Zeen WAN
ZLZhongzhong Liu
Zhongzhong Liu
Water–bearing fractures and seepage–prone zones ahead of tunnel faces may evolve rapidly under excavation–induced disturbance, making early identification and process tracking essential for risk mitigation. Cross–hole electrical resistivity tomography (ERT) is sensitive to fluid–controlled conductivity contrasts, but time–series interpretation based on independently inverted snapshots is often unreliable due to ill–posedness, noise, and temporal inconsistency. In this study, we propose an improved time–lapse ERT inversion framework for monitoring evolving water–bearing fractures ahead of tunnels. The method is formulated as a baseline–anchored, Occam–consistent difference inversion that directly estimates resistivity changes relative to an initial state, incorporating error–aware weighting of differenced data and anisotropic regularization adapted to cross–hole sensitivity, so that temporal coherence is enforced during inversion rather than through post hoc differencing. Synthetic verification is conducted using three dynamic scenarios representing horizontal, vertical, and diagonal migration of conductive water–bearing pathways between boreholes. Quantitative comparison against independent inversion across all scenarios and time steps demonstrates that the proposed framework substantially reduces the root mean square error and mean relative error of the recovered resistivity, while significantly improving the spatial correlation coefficient between the recovered and true models, with the largest improvements observed in the diagonal–migration scenario. The reconstructed change maps exhibit more compact anomaly geometry and delineate evolution corridors aligned with the prescribed trajectories, whereas independent inversion produces diffuse and epoch–dependent change patterns. These results indicate that the proposed time–lapse inversion framework provides a more reliable basis for interpreting evolving seepage–related conductive structures in tunnel–ahead investigations.