Within the context of climate change and the environmental impact of the building industry, insulation materials contribute to improving the thermal performance of buildings, thus reducing energy demand and carbon emissions during the operation phase. Although most of them are responsible for significant carbon emissions during their production, bio-based insulation materials can provide good performance with low carbon emissions. This paper aims to investigate natural insulation materials’ properties and environmental impacts through a literature review. Due to the growing importance of Environmental Product Declarations (EPDs) on specification requirements, many manufacturers already disclose environmental data related to their products, allowing for a comparison between thermal insulation solutions. In academic research, embodied environmental impacts are not as explored as physical properties. In addition, from the analysis of results, it is possible to conclude that the characterization of the physical properties of this type of material is normally focused on thermal conductivity. Nevertheless, most studies overlook other important parameters of these materials, such as the thermal capacity, lifetime, and environmental impacts. This is something that is necessary to overcome in future developments to allow for a comprehensive comparison between the properties of different (conventional and bio-based) insulation materials.
The United Nations Sustainable Development Goals (UN SDGs) ensure future human well-being. However, they face challenges due to the pressing need to reduce carbon emissions, with nearly 40% originating from the construction sector. With the current global environmental and energy crisis, there is a pressing need to address building carbon emissions and prioritise investments in passive strategies for improving indoor thermal comfort. Exploring fast-growing bio-based materials like bamboo, straw, hemp, and flax directly addresses these concerns, fostering environmental sustainability. Material selection in construction is crucial for advancing the SDGs, for example, promoting sustainable cities and communities (SDG11) and responsible consumption and production (SDG12). This paper proposes a comparative analysis of conventional and bio-based construction materials, focusing on their production stages through life cycle analysis. Tools such as Building Emissions Accounting for Materials (BEAM) and the Methodology for Relative Assessment of Sustainability (MARS) enable a detailed comparison. The results highlight the benefits of bio-based materials in storing carbon more rapidly and their lower environmental impact compared to conventional alternatives. Moreover, bio-based materials contribute to indoor moisture regulation and a healthier indoor environment, underscoring their potential to accelerate progress towards the UN SDGs through informed material choices in design practices.
7 June 2024 in Journal of Environmental Management
The footwear industry significantly impacts the environment, from raw material extraction to waste disposal. Transforming waste into new products is a viable option to mitigate the environmental consequences, reducing the reliance on virgin raw materials. This work aims to develop thermal and acoustic insulation materials using polyester waste from footwear industry. Two nonwoven and two compressed nonwoven structures, comprising 80% polyester waste and 20% commercial recycled polyester (matrix), were produced. The materials were created through needle-punching and compression molding techniques. The study included the production of sandwich and monolayer nonwoven structures, which were evaluated considering area weight, thickness, air permeability, mechanical properties, morphology using field emission scanning electron microscopy, and thermal and acoustic properties. The nonwoven samples presented high tensile strength (893 kPa and 629 kPa) and the highest strain (79.7% and 73.3%) and compressed nonwoven structures showed higher tensile strength (2700 kPa and 1291 kPa) but reduced strain (25.8% and 40.8%). Nonwoven samples showed thermal conductivity of 0.041 W/K.m and 0.037 W/K.m. Compressed nonwoven samples had higher values at 0.060 W/K.m and 0.070 W/K.m. While the sample with the highest conductivity exceeds typical insulation levels, other samples are suitable for thermal insulation. Nonwoven structures exhibited good absorption coefficients (0.640-0.644), suitable for acoustic insulation. Compressed nonwoven structures had lower values (0.291-0.536), unsuitable for this purpose. In summary, this study underscores the potential of 100% recycled polyester structures derived from footwear and textile industry waste, showcasing remarkable acoustic and thermal insulation properties ideal for the construction sector.
21 November 2025 in Journal of Building Engineering
Global environmental awareness pushes the building sector to achieve carbon neutrality and find low embodied impact solutions. The European Union has set a 2050 goal and is regulating the whole carbon life cycle (embodied and operational) as part of the Energy Performance of Buildings Directive (EPBD). In this scope, low-tech geo-bio-based materials can have an important role in reducing the embodied environmental impacts and carbon in buildings. Due to their low processing production, these materials fit in a circular approach since they can be easily recycled or returned to the natural environment at a minimal environmental cost. However, the lack of quantitative data on the life cycle environmental performance of some non-conventional techniques can hinder their use since professionals cannot compare the benefits of such versus conventional practice and comply with future EPBD requirements. This paper aims to contribute to the topic by presenting results on the life cycle environmental performance of earthen materials and bio-based insulation products versus conventional solutions based on data from Environmental Product Declarations or studies following the EN15804 standard. The results show that earthen materials can reduce the potential environmental impacts by about 50% versus conventional mansory walls. At the same time, bio-based insulation solutions offer the advantage of lowering operational carbon emissions and stocking carbon (e.g. straw has a Global Warming Potential performance about three times better than Expanded Polystyrene). The benefits of using earthen and bio-based materials are also discussed for the different building life-cycle stages, focusing on the possibility of reusing/recycling these materials in a closed-loop approach.
21 November 2025 in Waste and Biomass Valorization