Lore Zierul

Ms. Lore Zierul

Institut für Massivbau, Technische Universität Dresden, Dresden, Saxony, Germany
orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2024 in Buildings
Verified
Journal Article
Open access
PDF file
LZLore Zierul
Lore Zierul
EBEnrico Baumgaertel
Enrico Baumgaertel
DSDavid Sandmann
David Sandmann
Steffen MarxSteffen Marx
Steffen Marx
The use of non-metallic reinforcement can significantly reduce the carbon footprint of the construction sector. Mixed structures made out of steel and non-metallic reinforcement should be avoided due to the risk of galvanic corrosion. So far, researchers have been focusing on the load-bearing behavior in the longitudinal direction of the fibers. In this study, the behavior of the fibers in the non-metallic reinforcements is analyzed perpendicular to the fiber orientation. Therefore, a uniaxial shear test on a single bar (uniaxial shear test), as well as a series of push-off tests with reinforcements embedded in the concrete, was carried out. For both experiments, bars made of carbon fiber-reinforced polymers (CFRPs) and glass fiber-reinforced polymers (GFRPs) were investigated. In order to analyze the influence of non-metallic reinforcement in the joint, specimens without reinforcement have been tested as well. Also, the joint roughness and reinforcement ratio of the concrete joint was varied in the tests. The determined transverse shear strengths for the single bar exceed the values of the producer. For the push-off test, high standard deviations occurred, making it difficult to draw firm conclusions. Nevertheless, it is shown that increasing the amount of reinforcement leads to higher ultimate forces. The presented study emphasizes the necessity of further studies of the shear transfer in concrete joints.

13 July 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
LZLore Zierul
Lore Zierul
SGSzymon Grzesiak
Szymon Grzesiak
FLFrank Liebold
Frank Liebold
MPMatthias Pahn
Matthias Pahn
HMHans-Gerd Maas
Hans-Gerd Maas
BBBirgit Beckmann
Birgit Beckmann
The global need to reduce resource consumption in the construction sector requires nonstandard solutions. One solution for achieving lightness in concrete is carbon reinforced concrete, where the carbon reinforcement enables the reduction of concrete cover, as it can not corrode. Therefore, structures that are very thin-walled can be built. However, the challenge to include a reinforcement that provides resistance against bending and shear remains. This paper presents two types of 3D carbon reinforcement. The hollow core beams are reinforced with a 3D net lattice girders and a 3D reinforcement from post-shaping a biaxial grids. To evaluate the position of the reinforcement in the thin-walled webs and whether the concrete cover is enough, a nondestructive (NDT) method, such as computed tomography (CT), is used. The novelty of this study relates to the size of the sample, where real-scale beams are scanned with X-ray under load. With the help of the CT the crack initiation could be found to be independent from the chosen carbon reinforcement and therefore the thinwebs and flanges can not be held accountable for preliminary failure. The resulting voxel data sequences is analyzed with digital volume correlation in order to detect cracks and to investigate the failure behavior. In addition, digital image correlation and inductive displacement transducers are used to verify the results. The comparison of the cracks in the lower flange of the beam shows that they can be detected by both methods and the difference in the determined crack widths is explained by artifacts in the CT scan. Improvements for further scans are given.