This paper aims to propose and compare three new structures of single-phase field excited flux switching machine for pedestal fan application. Conventional six-slot/three-pole salient rotor design has better performance in terms of torque, whilst also having a higher back-EMF and unbalanced electromagnetic forces. Due to the alignment position of the rotor pole with stator teeth, the salient rotor design could not generate torque (called dead zone torque). A new structure having sub-part rotor design has the capability to eliminate dead zone torque. Both the conventional eight-slot/four-pole sub-part rotor design and six-slot/three-pole salient rotor design have an overlapped winding arrangement between armature coil and field excitation coil that depicts high copper losses as well as results in increased size of motor. Additionally, a field excited flux switching machine with a salient structure of the rotor has high flux strength in the stator-core that has considerable impact on high iron losses. Therefore, a novel topology in terms of modular rotor of single-phase field excited flux switching machine with eight-slot/six-pole configuration is proposed, which enable non-overlap arrangement between armature coil and FEC winding that facilitates reduction in the copper losses. The proposed modular rotor design acquires reduced iron losses as well as reduced active rotor mass comparatively to conventional rotor design. It is very persuasive to analyze the range of speed for these rotors to avoid cracks and deformation, the maximum tensile strength (can be measured with principal stress in research) of the rotor analysis is conducted using JMAG. A deterministic optimization technique is implemented to enhance the electromagnetic performance of eight-slot/six-pole modular rotor design. The electromagnetic performance of the conventional sub-part rotor design, doubly salient rotor design, and proposed novel-modular rotor design is analyzed by 3D-finite element analysis (3D-FEA), including flux linkage, flux distribution, flux strength, back-EMF, cogging torque, torque characteristics, iron losses, and efficiency.
In recent years, numerous topologies of single phase and three phase Field Excited Flux-Switching Machine (FEFSM) have been developed for several application such as flux weakening capability and high speed because of robust structure of rotor. However, conventional 8S-4P sub-part rotor design has higher iron losses in stator and rotor core. Overlapped winding configuration between Field Excitation coil (FEC) and Armature coil of conventional design has a problem of high copper consumption. This paper presents novel topology of single phase modular rotor field excited FSM with 8s-6p configuration, which enable non-overlap arrangement between armature coil and FEC winding that facilitates devaluation in the copper losses. The proposed rotor design acquires reduced iron losses comparatively to conventional design. The electromagnetic performance of conventional sub-part rotor design and proposed novel-modular rotor design is analyzed by 3D-Finite Element Analysis (3D-FEA), includes flux linkage, flux strength, back-EMF, cogging torque, torque characteristics and iron losses.
this paper present Rotor Notching Technique in which optimized dummy slot is designed on the rotor core of Squirrel Cage Induction Motor. Electromagnetic noise is produced due to the radial Maxwell force. In order to reduce the electromagnetic noise and vibration by suppressing the rotor slot permeance harmonic dummy slot/notch is proposed. Firstly, the theoretical background of the suggested technique is presented. Secondly, to calculate Radial Maxwell force harmonics structural finite-element analysis is performed. It depicts that the modified Squirrel Cage Induction Motor design has reduction in overall noise and vibration up to 7db as compare to conventional design. Dummy slot on rotor core effect the electromagnetic performance of Machine. General attempts have been made to design the shape of rotor bar that increases the operational torque of SCIM. Subsequently, the leakage flux has been increased due to Rotor Notching Technique which effects the average torque and operational efficiency. To improve the average torque and operational efficiency, Shallow/rectangular rotor bar is proposed. This paper presents the new rotor core design that improves operational efficiency, average torque and reduce the Electromagnetic noise of SCIM.
26 November 2020 in Mechanics Based Design of Structures and Machines
To avoid the problem of crowded primary and rising temperature of permanent magnet (PM), the design of partitioned primary hybrid excited linear flux switching machine (PP-HLFSM) positions the armature, and field excitation coil winding on separate part of the mover. This article examines the performance analysis of different structures of unaligned structure of PP-HLFSM and compared the proposed designs by reducing the usage of PM to half in terms of volume from 25,920 mm3 to 12,960 mm3, for both concentrated and toroidal winding structure leading toward cost effectiveness. This article scales down the cost of proposed designs for elevator long stroke application. Based on finite element analysis (FEA) and boundary element analysis, the electromagnetic performance of the machine is studied in detail. Single variable optimization is implemented to optimize both the proposed structures. Analysis includes flux linkages, flux strengthening, average force characteristics, force–velocity and power–velocity curves, copper losses, iron losses, efficiency, thrust force density and power density, and demagnetization analysis. Comparison of conventional structure with proposed designs are made in terms of flux, thrust force, losses, efficiency, power density, demagnetization of PMs, and thermal analysis, along with 3D FEA analysis. Finally, the proposed structures are analytically validated.
Various topologies of single-phase Wound-Field Switched Flux (WFSF) machines have been introduced recently due to low cost and high efficiency. In this paper 8-slots WFSF machine with 6 and 10 rotor poles have been compared with 12S-6P segmental rotor WFSF machine. 12S-6P WFSF machine have alternate windings arrangement of field excitation coil and disadvantage of less flux linkage, high cogging torque, and low average torque. 8S-10P and 8S-6P WFSF machines have forward windings arrangement of field excitation coil and salient rotor structure exhibits higher flux linkage, greater average torque, and suitable for high speed applications. 2-Dimension Finite Element Method (FEM) is used to evaluate the performance of WFSF machines. The simulation results including flux-linkage, back-EMF, cogging torque, torque characteristics, instantaneous torque, and torque speed characteristics of machines are compared.
Partitioned-primary hybrid-excited linear flux switching machine (PP-HLFSM), 12-slots/13-pole is presented in this paper and compared with the conventional design. Number of PMs is halved in the proposed design, thus reducing the cost of the machine. Unaligned structure is supported as the permanent magnets are aligned with the armature slots, improving the flux linkage and the thrust force. Field excitation coil (FEC) and armature winding configuration is positioned on the separate parts of the primary to avoid the congested situation of the primary and the heat up condition of permanent magnets. Whilst, secondary is made of iron following a simple construction. Based on the finite element analysis (FEA) and boundary element analysis (BEA), flux linkages, detent force, and average thrust force is analyzed and compared with the conventional design.