Hamid Ali Khan

Mr. Hamid Ali Khan

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 March 2021 in IEEE Access
Verified
Journal Article
Open access
HKHamid Ali Khan
Hamid Ali Khan
FKFaisal khan
Faisal khan
SKSurat Khan
Surat Khan
NANaseer Ahmad
Naseer Ahmad
JSJahangeer Badar Soomro
Jahangeer Badar Soomro
Irfan SamiIrfan Sami
Irfan Sami
High-speed rotating mechanical machinery is a developed, mature and reliable technology for many engineering applications. In high-speed permanent magnet machines, the rotor's permanent magnet PM is not strong enough to withstand the centrifugal force resulting from excessive rotational speed; thus, the PM material must be protected by a non-magnetic alloy sleeve. This paper presents a novel high-speed PM machine with solid rotor PM covered by a titanium retaining sleeve. The rotor stress condition is simplified as a plane stress problem according to the strength measurement of solid PM rotors in the high-speed PM motors. The analytical formulas for rotor stress are presented based on the polar coordinate displacement method. The proposed model is compared with a conventional model having auxiliary slots in stator teeth. Using a finite element analysis environment, the performance analysis shows that the proposed design has reduced magnet eddy current loss, cogging torque, and iron losses. The initial design is also optimized using a deterministic optimization algorithm that increases output torque by 26% compared to the initial design.

20 July 2020 in IEEE Access
Verified
Journal Article
Open access
HKHamid Ali Khan
Hamid Ali Khan
FKFaisal khan
Faisal khan
NANaseer Ahmad
Naseer Ahmad
Jongsuk RoJongsuk Ro
Jongsuk Ro
In high speed permanent magnet (HSPM) machines, the computation of magnet eddy current loss is essential as these losses significantly affect the temperature of the permanent magnet (PM) and electromagnetic performance and can result in irreversible demagnetization of the PM. Several techniques have been adopted to minimize the eddy current loss of the PM; however, superior performance has not been achieved yet. In this paper, the design characteristics of the HSPM machine are analyzed. The PM is covered by a titanium sleeve to retain the PM on the rotor and to further reduce the eddy current loss of the magnet. The undesirable harmonics of the airgap flux density are minimized, which reduces the eddy current loss in the solid PM and rotor. Two existing models, with and without auxiliary slots, are examined and compared with the proposed design having a titanium-based retaining sleeve. The analysis reveals that the eddy-current loss, cogging torque, and iron losses of the PM are reduced by 82%, 73%, and 44.7%, respectively, in the proposed model; however, a marginal increase is observed in the average rated torque profile and open circuit flux linkage.

25 April 2019 in Energies
Verified
Journal Article
Open access
PDF file
LRLutf Ur Rahman
Lutf Ur Rahman
FKFaisal khan
Faisal khan
MKMuhammad Afzal Khan
Muhammad Afzal Khan
NANaseer Ahmad
Naseer Ahmad
HKHamid Ali Khan
Hamid Ali Khan
HAHazrat Ali
Hazrat Ali
This paper aims to propose and compare three new structures of single-phase field excited flux switching machine for pedestal fan application. Conventional six-slot/three-pole salient rotor design has better performance in terms of torque, whilst also having a higher back-EMF and unbalanced electromagnetic forces. Due to the alignment position of the rotor pole with stator teeth, the salient rotor design could not generate torque (called dead zone torque). A new structure having sub-part rotor design has the capability to eliminate dead zone torque. Both the conventional eight-slot/four-pole sub-part rotor design and six-slot/three-pole salient rotor design have an overlapped winding arrangement between armature coil and field excitation coil that depicts high copper losses as well as results in increased size of motor. Additionally, a field excited flux switching machine with a salient structure of the rotor has high flux strength in the stator-core that has considerable impact on high iron losses. Therefore, a novel topology in terms of modular rotor of single-phase field excited flux switching machine with eight-slot/six-pole configuration is proposed, which enable non-overlap arrangement between armature coil and FEC winding that facilitates reduction in the copper losses. The proposed modular rotor design acquires reduced iron losses as well as reduced active rotor mass comparatively to conventional rotor design. It is very persuasive to analyze the range of speed for these rotors to avoid cracks and deformation, the maximum tensile strength (can be measured with principal stress in research) of the rotor analysis is conducted using JMAG. A deterministic optimization technique is implemented to enhance the electromagnetic performance of eight-slot/six-pole modular rotor design. The electromagnetic performance of the conventional sub-part rotor design, doubly salient rotor design, and proposed novel-modular rotor design is analyzed by 3D-finite element analysis (3D-FEA), including flux linkage, flux distribution, flux strength, back-EMF, cogging torque, torque characteristics, iron losses, and efficiency.

24 June 2024 in IEEE Access
Verified
Journal Article
Open access
CCCesare Ciriani
Cesare Ciriani
HKHamid Ali Khan
Hamid Ali Khan
KMKirols Mansour
Kirols Mansour
MOMatteo Olivo
Matteo Olivo
ATAlberto Tessarolo
Alberto Tessarolo
Multiphase Fractional Slot Concentrated Windings (FSCWs) are an attractive potential solution in the design of permanent-magnet synchronous machines as they combine the advantages of multiphase windings, such as power segmentation and fault tolerance, with the benefits of FSCWs, like high manufacturability and short end coils. The adoption of multiphase FSCWs is limited by the fact that, according to the existing literature, their symmetrical implementation is possible only for specific sets of slot-pole combinations. The main contribution of the paper is to set forth a method which, resorting to multi-layer arrangements (wherein multiple coils belonging to different phases may be wound on the same tooth), makes it possible to design a symmetrical multiphase FSCW with a theoretically arbitrary number of slots, poles and phases. To this end, an innovative design procedure, based on linear programming and simplex method, is presented as an alternative to the conventional star-of-slot technique to achieve a symmetrical FSCW with any number of slots, poles and phases. For illustration purposes, the proposed procedure is applied to design both a six-phase (dual three-phase) FSCW and a five-phase FSCW for a surface-mounted permanent magnet machine with 9 slots and 8 poles. Both the FSCWs are considered as not feasible according to the present literature and cannot be designed using the star-of-slot technique. The paper shows that, adopting the new proposed approach, the two windings can be designed in a symmetrical form achieving reasonably high winding factors (0.967 and 0.959 in the six-phase and five-phase case, respectively). The results are validated through Finite Element Analysis (FEA) simulations, whose accuracy and reliability are preliminarily assessed by comparison against experimental tests on a laboratory prototype.

1 August 2019
Verified
Conference Paper
Closed access
WUWasiq Ullah
Wasiq Ullah
FKFaisal Khan
Faisal Khan
NUNoman Ullah
Noman Ullah
MUMuhammad Umair
Muhammad Umair
BKBakhtiar Khan
Bakhtiar Khan
HKHamid Ali Khan
Hamid Ali Khan
Switched Flux Permanent Magnet Machines (SFPMM) are competent candidates when high torque density is the essential demand however, large volume of rare earth Permanent Magnet (PM) increase overall machine cost and weight. Moreover, PMs ending through stator yoke cause serious issues of flux leakages which deteriorate electromagnetic performance. In order to reduce PM usage and suppress flux leakage, Consequent Pole SFPMM (CPSFPMM) is developed that successfully suppress flux leakage and reduce PMs volume effectively. Moreover, Finite Element Analysis (FEA) is accomplished utilizing commercially available FEA package JMAG designer v.18.1 for performance evaluation of six different topologies of SFPMM and CPSFPMM with E-Core and C-Core. Various key performance indicators such as open-circuit flux linkage, cogging torque, torque ripples, Total Harmonic distortion (THD), electromagnetic torque and PM cost and weight are analyzed and compared. Based on Finite Element (FE) analysis developed CPSFPMM with E-Core and C-Core successfully suppress PMs leakages form stator and reduced PMs volume by 22.98% and PM cost by 22.49%. Thus, reduces overall machine cost and weight. Moreover, the proposed designs have successfully reduced cogging torque, torque ripples, THD, and improve torque capability under higher current density.

19 March 2022 in Energies
Verified
Journal Article
Open access
PDF file
SKSurat Khan
Surat Khan
Abdin AbdinAbdin Abdin
Abdin Abdin
NANaseer Ahmad
Naseer Ahmad
Shoaib AhmedShoaib Ahmed
Shoaib Ahmed
HKHamid Ali Khan
Hamid Ali Khan
AMAhmad Milyani
Ahmad Milyani
In this research paper, various performances of five different rotor pole topologies of the proposed novel modular stator (MS) permanent magnet (PM) flux reversal machine were investigated. The proposed design had concentrated, non-overlapping winding, which offered high average torque capability at a wide speed range. The no-load performances such as coil test analysis, three-phase flux linkage, flux distribution, back-EMF, and cogging torque, and load analysis, such as average torque versus current density, instantaneous torque, and average electromagnetic torque, were compared. The PM modular stator machine had high cogging torque, which created vibration and noise in the machine. Different cogging torque reduction techniques, such as notching, arc, flange and hybrid technique arc flange, arc notch, notch flange, and arc notch flange, were applied to reduce the cogging torque, improve average load torque, and reduce the induced voltage, harmonics, and torque ripples. The maximum cogging torque decreased by 87.66% and 82% when the arc notch flange and notch arc techniques were applied, respectively, and the minimum effect on cogging torque by the flange technique was 20.66%. Furthermore, the arc flange technique reduced the average torque by 66.72%. The maximum induced voltage was reduced by up to 12.83% using the notch arc technique. The hybrid technique of arc notch flange reduced the harmonics content in flux by 40% and enhanced electromagnetic performance. When applying the hybrid arc notch flange technique, torque ripples were reduced to 90.11%.