Majid Ali

Dr. Majid Ali

AAU Energy, Aalborg University, Aalborg, Nordjylland, Denmark
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 February 2023 in Energies
Verified
Journal Article
Open access
PDF file
JCJorge De La Cruz
Jorge De La Cruz
Eduardo Gomez LunaEduardo Gomez Luna
Eduardo Gomez Luna
Majid AliMajid Ali
Majid Ali
Juan C. VasquezJuan C. Vasquez
Juan C. Vasquez
Josep M. GuerreroJosep M. Guerrero
Josep M. Guerrero
Thanks to smart grids, more intelligent devices may now be integrated into the electric grid, which increases the robustness and resilience of the system. The integration of distributed energy resources is expected to require extensive use of communication systems as well as a variety of interconnected technologies for monitoring, protection, and control. The fault location and diagnosis are essential for the security and well-coordinated operation of these systems since there is also greater risk and different paths for a fault or contingency in the system. Considering smart distribution systems, microgrids, and smart automation substations, a full investigation of fault location in SGs over the distribution domain is still not enough, and this study proposes to analyze the fault location issues and common types of power failures in most of their physical components and communication infrastructure. In addition, we explore several fault location techniques in the smart grid’s distribution sector as well as fault location methods recommended to improve resilience, which will aid readers in choosing methods for their own research. Finally, conclusions are given after discussing the trends in fault location and detection techniques.

15 February 2023 in Energies
Verified
Journal Article
Open access
PDF file
Majid AliMajid Ali
Majid Ali
Juan C. VasquezJuan C. Vasquez
Juan C. Vasquez
Josep M. GuerreroJosep M. Guerrero
Josep M. Guerrero
Yajuan GuanYajuan Guan
Yajuan Guan
Saeed GolestanSaeed Golestan
Saeed Golestan
Baseem KhanBaseem Khan
Baseem Khan
Extreme weather conditions and natural disasters (ND) are the main causes of power outages in the electric grid. It is necessary to strengthen the electrical power system’s resilience during these catastrophic occurrences, and microgrids may be seen as the best way to achieve this goal. In this paper, two different energy system scenarios were proposed for increasing the resiliency of the electric power system during random outages. In the first scenario, a diesel generator (DG) was used to deliver energy to key loads during grid disruptions, in conjunction with a utility electric grid (UEG) and local electric load (ELL). A grid-connected ad hoc microgrid (MG) with a photovoltaic (PV) system, a battery energy storage (BES) system, and local electric loads made up the second scenario. The PV system and the BES system were used to supply the key loads with electricity during the outage. The major aim of this research was to compare the two resilient-based systems from the perspectives of technology, economics, and the environment. Given that it requires greater resilience than the other loads during severe weather, a hospital load on Indonesia’s Lombok Island was chosen as the critical load. The objective function considers the system’s predefined constraints to reduce the overall net present cost (NPC) and the cost of energy in order to maximize the system resilience (COE). The Optimization of Multiple Energy Resources (HOMER) Grid simulated a 3-day outage in August 2021, and the results demonstrated that the resiliency enhancement for both scenarios was nearly identical. The first scenario resulted in fewer CO2 emissions; however, the second scenario delivered lower operating costs and COE. The simulation’s findings showed that system 1 created an annual emission of 216.902 kg/yr while system 2 only produced an emission of 63.292 kg/yr. This study shows that since RES-based MGs don’t burn fossil fuels to generate power, they are more environmentally friendly resources.

14 March 2023 in Energies
Verified
Journal Article
Open access
PDF file
AKAreeb Khalid
Areeb Khalid
Syed Abdul Rahman KashifSyed Abdul Rahman Kashif
Syed Abdul Rahman Kashif
NANoor Ul Ain
Noor Ul Ain
MAMuhammad Awais
Muhammad Awais
Majid AliMajid Ali
Majid Ali
Baseem KhanBaseem Khan
Baseem Khan
Over the last few decades, lithium-ion batteries have grown in importance for the use of many portable devices and vehicular applications. It has been seen that their life expectancy is much more effective if the required conditions are met. In one of the required conditions, accurately estimating the battery’s state of charge (SOC) is one of the important factors. The purpose of this research paper is to implement the probabilistic filter algorithms for SOC estimation; however, there are challenges associated with that. Generally, for the battery to be effective the Bayesian estimation algorithms are required, which are recursively updating the probability density function of the system states. To address the challenges associated with SOC estimation, the research paper goes further into the functions of the extended Kalman filter (EKF) and sigma point Kalman filter (SPKF). The function of both of these filters will be able to provide an accurate estimation. Further studies are required for these filters’ performance, robustness, and computational complexity. For example, some filters might be accurate, might not be robust, and/or not implementable on a simple microcontroller in a vehicle’s battery management system (BMS). A comparison is made between the EKF and SPKF by running simulations in MATLAB. It is found that the SPKF has an obvious advantage over the EKF in state estimation. Within the SPKF, the sub-filter, the central difference Kalman filter (CDKF), can be considered as an alternative to the EKF for state estimation in battery management systems for electric vehicles. However, there are implications to this which include the compromise of computational complexity in which a more sophisticated micro-controller is required.

2 April 2025 in Renewable Energy Focus
Verified
Journal Article
Open access
Majid AliMajid Ali
Majid Ali
YGYajuan Guan
Yajuan Guan
Juan C. VasquezJuan C. Vasquez
Juan C. Vasquez
JGJosep M. Guerrero
Josep M. Guerrero
FWFransisco Danang Wijaya
Fransisco Danang Wijaya
APAdam Priyo Perdana
Adam Priyo Perdana

1 November 2021 in Indonesian Journal of Electrical Engineering and Computer Science
Verified
Journal Article
Open access
PDF file
Majid AliMajid Ali
Majid Ali
FRFaizan Rashid
Faizan Rashid
SRSaim Rasheed
Saim Rasheed
For all industrial and distribution sites, the lagging power factor of electrical loads is a common problem. In the early days, it was corrected manually by adding the capacitor banks of certain values in parallel. Automatic power factor correction (APFC) using a capacitor bank helps to make a power factor that is close to unity. It consists of a microcontroller that processes the value of the power factor to enable the system and monitor the power factor if it falls below (0.77) from the specified level. This paper presents the automatic correction of the power factor by adding the capacitors banks automatically of the desired value in a three-phase system in the form of binary coding (0-7). The main purpose of this system is to maintain the power factor as close as to unity, for the experimental case, it is set to (0.93) which helps to decreases the losses and ultimately increase the efficiency of the system.

30 December 2024 in Electronics
Verified
Journal Article
Open access
PDF file
NMNouha Mansouri
Nouha Mansouri
MAMnassri Aymen
Mnassri Aymen
SNSihem Nasri
Sihem Nasri
Majid AliMajid Ali
Majid Ali
Abderezak LashabAbderezak Lashab
Abderezak Lashab
Josep M. GuerreroJosep M. Guerrero
Josep M. Guerrero
This paper investigates the feasibility of hydrogen-powered hybrid electric vehicles as a solution to transportation-related pollution. It focuses on optimizing energy use to improve efficiency and reduce emissions. The study details the creation and real-time performance assessment of a hydrogen hybrid electric vehicle (HHEV)system using an STM32F407VG board. This system includes a fuel cell (FC) as the main energy source, a battery (Bat) to provide energy during hydrogen supply disruptions and a supercapacitor (SC) to handle power fluctuations. A multi-agent-based artificial intelligence tool is used to model the system components, and an energy management algorithm (EMA) is applied to optimize energy use and support decision-making. Real Global Positioning System (GPS) data are analyzed to estimate energy consumption based on trip and speed parameters. The EMA, developed and implemented in real-time using Matlab/Simulink(2016), identifies the most energy-efficient routes. The results show that the proposed vehicle architecture and management strategy effectively select optimal routes with minimal energy use.