One attractive feature of the original pseudopotential method consists on its simplicity of adding a force dependent on a nearest-neighbor potential function. In order to improve the method, regarding thermodynamic consistency and control of surface tension, different approaches were developed in the literature, such as multirange interactions potential and modified forcing schemes. In this work, a strategy to combine these enhancements with an appropriate interaction force field using only nearest-neighbor interactions is devised, starting from the desired pressure tensor. The final step of our procedure is implementing this external force by using the classical Guo forcing scheme. Numerical tests regarding static and dynamic flow conditions were performed. Static tests showed that current procedure is suitable to control the surface tension and phase densities. Based on thermodynamic principles, it is devised a solution for phase densities in a droplet, which states explicitly dependence on the surface tension and interface curvature. A comparison with numerical results suggest a physical inconsistency in the pseudopotential method. This fact is not commonly discussed in the literature, since most of studies are limited to the Maxwell equal area rule. However, this inconsistency is shown to be dependent on the equation of state (EOS), and its effects can be mitigated by an appropriate choice of Carnahan-Starling EOS parameters. Also, a droplet oscillation test was performed, and the most divergent solution under certain flow conditions deviated 7.5% from the expected analytical result. At the end, a droplet impact test against a solid wall was performed to verify the method stability, and it was possible to reach stable simulation results with density ratio of almost 2400 and Reynolds number of . The observed results corroborate that the proposed method is able to replicate the desired macroscopic multiphase behavior.
The pseudopotential Lattice Boltzmann Method has attracted much attention in the recent years for the simulation of boiling heat transfer. Many studies have been published recently for the simulation of the bubble cycle (nucleation, growth and departure from a heated surface). This paper puts forward two-dimensional simulations of bubble nucleation, growth and departure using an improved pseudopotential Lattice Boltzmann Model from the literature at different reduced temperatures, and . Two different models using the Bhatnagar–Gross–Krook (BGK) and the Multiple-Relaxation-Time (MRT) collision operators with appropriate forcing schemes are used. The results for pool boiling show that the bubbles exhibit axial symmetry during growth and departure. Numerical results of departure diameter and release period for pool boiling are compared against empirical correlations from the literature by varying the gravitational acceleration. Reasonable agreement is observed. Nucleate boiling trends with heat flux are also captured by the simulations. Numerical results of flow boiling simulations are compared by varying the Reynolds number for both reduced temperatures with the MRT model. It was found that the departure diamenter and release period decreases with the increase of the Reynolds number. These results are a direct effect of the drag force. Proper conclusions are commented at the end of the paper.
Boiling heat transfer plays a crucial role in various engineering applications, requiring accurate numerical modeling to capture phase-change dynamics. This study employs the pseudopotential lattice Boltzmann method (LBM) to simulate boiling heat transfer at different reduced temperatures, aiming to provide deeper insights into bubble dynamics and heat transfer mechanisms. The LBM framework incorporates a multi-relaxation-time approach and the Peng–Robinson equation of state to enhance numerical stability and thermodynamic consistency. Simulations were performed to analyze bubble nucleation, growth, and detachment across varying reduced temperatures, considering the influence of surface wettability, surface tension and gravitational acceleration. The results indicate a strong dependence of bubble behavior on the reduced temperature, affecting both heat flux and boiling regimes. The numerical findings show reasonable agreement with theoretical predictions and experimental trends, validating the effectiveness of the LBM approach for phase-change simulations. Additionally, this study highlights the role of contact angle variation in modifying boiling characteristics, emphasizing the necessity of accurate surface interaction modeling. The outcomes of this work contribute to advancing computational methodologies for boiling heat transfer, supporting improved thermal management in industrial applications.
1 April 2020 in Flow Measurement and Instrumentation