Additive manufacturing enables new design solutions across various engineering fields. This work presents a method to enhance the sustainability of adhesive joints by designing joints that can be disassembled and repaired multiple times. The approach involves the use of a Multi-Material Additive Manufacturing process to produce substrates with integrated circuits and electrical resistance, printed using a conductive filament. This resistance can be used to heat the thermoplastic adhesive layer up to 110 °C, allowing for reversibility in the assembly process and enabling joint re-use and repair without constraints on the component’s materials and thicknesses. The joints tested after successive assembly/disassembly operations reach maximum strength during the first iteration, which decreases by around 50% after five repair iterations. The focus of the work is on the feasibility of this process, but it is expected that performance can be improved after process optimization. This result could be highly valuable for enabling component in-service healing and the design for demanufacturing and remanufacturing.
11 May 2025 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Commercially available prosthetic feet are expensive due to the use of advanced composite materials, typically consisting of a thermosetting polymer matrix reinforced with continuous carbon fibers, and the highly labor-intensive manufacturing processes required for their production. Furthermore, carbon fiber laminates present significant environmental challenges due to their energy-intensive fabrication and limited recyclability. This work proposes an innovative design methodology for custom prosthetic feet utilizing bamboo laminate, a sustainable, cost-effective, and widely accessible material. The work begins with a comprehensive analysis of existing prosthetic solutions, including an evaluation of commercial prosthetic models and their compliance with established biomechanical and engineering standards. Then the drawn design principles of prosthetics feet are systematically applied, encompassing material selection and the optimization of geometric parameters to closely replicate the mechanical behavior and user comfort of conventional prosthetic feet. The roll-over shapes of the feet are utilized as reference metric to evaluate the feet design. Then a specific commercial prosthetic foot is reverse-engineered and experimentally tested. The data and the drawn design method are used for the design, the development, the validation, and the refinement of the bamboo laminate prosthetic feet. Moreover, design constraints related to aesthetics and functionality are considered. The designed bamboo laminate prosthetic foot achieves a strength-to-weight ratio comparable to that of carbon fiber laminates, with a stiffness variation of less than 10% and a marginal increase in height of only 1.35%. Therefore, the feasibility of bamboo laminate prosthetic foot is confirmed. The proposed design is an high-performance, cost-efficient, and environmentally sustainable alternative to the commercial prosthetic foot for a broader population of users.
This study proposes an approach to design and develop a prosthetic foot using bamboo laminate, a sustainable and cost-effective material. The proposed design method is an alternative to the current prosthetic foot design methods developed mainly for carbon-fiber reinforced polymer. This design solution entails significant economic and environmental costs. The research is structured into three main phases: an experimental campaign to characterize the reference prosthesis and select materials for the prototype; a dimensional design and prototyping phase using the new materials; and finally, a phase dedicated to testing and comparative evaluation of the results. Static tests, conducted in accordance with ISO 22675 on both the bamboo prototype and a commercial reference model, revealed comparable static performance between the two solutions. The laminated bamboo prosthetic foot exhibits a strength-to-weight ratio comparable to that of carbon fiber laminates. Its stiffness deviates by less than 15%, with an 8% reduction in weight and a 7% increase in volume compared to the carbon fiber counterpart. Therefore, these results confirm the feasibility of laminated bamboo as a viable material for prosthetic foot design.
29 June 2025 in Progress in Additive Manufacturing
This study explores the development of adhesive joints incorporating embedded resistive heating elements, fabricated using Multi-Material Additive Manufacturing. By embedding conductive circuits within the adherends, localized heating enables controlled curing of the adhesive, optimizing its mechanical properties according to the specific application. This study focused on modifying the stiffness of the adhesive in order to reduce edge effects in the joints and allow for better load distribution. The adherends were made of PLA, the resistive heating elements were fabricated using carbon black-filled conductive PLA, and an epoxy resin served as the adhesive. Thermal and mechanical characterizations were conducted, evaluating the effects of different curing temperatures on joint strength. The tensile strength for joints cured at 120 °C exhibited a 58% increase in maximum breaking force and a 144% increase in elongation at break compared to the joints cured at room temperature. These findings highlight the potential of AM-integrated resistive heating for precise adhesive curing, enabling the local tailoring of the adhesive stiffness in the overlap volume.
18 August 2026 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Rodents are widely employed in biomedical research due to their physiological similarity to humans and the availability of established experimental protocols. Among them, the rat sciatic nerve is commonly used as a reference for human peripheral nerves in studies of regeneration, repair, and mechanical characterization. However, rodent peripheral nerves exhibit substantial inter- and intra-specimen variability in their mechanical andstructural properties, complicating reproducibility and comparison across experiments. This limitation becomes particularly relevant in studies involving tissue adhesives, where the mechanical response of the biological substrate can strongly influence the evaluation of adhesive performance and the interpretation of bonded-joint behaviour. To overcome these limitations, synthetic constructs and analytical or numerical models have been proposed to replicate the behaviour of biological tissues. While effective, these approaches often involve complex fabrication processes, high costs, or require extensive prior knowledge of tissue properties, limiting their routine laboratory application. In this study, we propose a simplified, reproducible, and cost-effective synthetic analogue of the rat sciatic nerve that replicates its mechanical behaviour. Different polymers were mechanically characterized via tensile testing and compared with nerve tissue. The best polymer demonstrated an elastic response most closely matching that of biological nerves, while also providing superior tensile strength, which contributes to the mechanical robustness of the synthetic analogue during adhesion testing. Adhesion tests on cyanoacrylate-bonded natural and synthetic specimens showed no statistically significant difference in joint stiffness between bonded PVC and bonded sciatic nerve specimens, although the small sample size limits the strength of this comparison.