Wastewater from many sectors that contains hazardous organic pollutants exacerbates environmental contamination. Consequently, outstanding photocatalytic substances that can successfully degrade hazardous substances are needed to provide pollution-free water. From this perspective, zinc oxide/g-C3N4-based composites are desirable due to their low cost, strong reactivity, and environmental friendliness. So, in the current investigation, sequences of Mn/g-C3N4/ZnO (Mn/GZ) and Ni/g-C3N4/ZnO (Ni/GZ) nanocomposites (NCs) containing different concentrations (wt.%) of g-C3N4 were made via the co-precipitation process. The chemical makeup and morphological characteristics of the produced composites were ascertained via the techniques of transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), Fourier transform infrared (FTIR), photoluminescence (PL), and UV spectrophotometry. Methyl orange (MO) and Eriochrome Black T (EBT) dyes were used as target pollutants to assess the composite materials’ photocatalytic effectiveness. Compared to g-C3N4/ZnO and g-C3N4, the produced Mn/GZ and Ni/GZ NCs displayed better photocatalytic activity. The improved photocatalytic efficiency of the Ni/GZ and Mn/GZ NCs might be credited to synergistic interactions at the g-C3N4 and ZnO interface that result in a more efficient separation and conduction of photo-induced charges. Furthermore, the Ni/Mn atoms act as the facilitators to improve electron–hole pair separation and conduction in NCs. The nanocomposites were found to be incredibly stable, with consistently high dye decoloration efficiency over five catalytic cycles. Hence, Ni/GZ and Mn/GZ could potentially be very effective and adaptable photocatalysts for the photocatalytic decoloration of wastewater pollutants.
In this study, the structural and magnetic properties of a series of functionalized Co100−xNix (x = 20, 30, 40, 50, 60, 80, 85) nanoparticles (NPs) were analyzed with the objective of attaining a high specific absorption rate (SAR). The magnetic nanoparticles (MNPs) obtained by ball milling at 1425 rpm lie in the range of 03–29 nm and are studied as potential candidates for magnetic fluid hyperthermia. Magnetic measurements show that all samples possess soft ferromagnetic properties with the reduction in the Curie temperature (TC) by Ni substitution in Co100−xNix alloys and by ball milling. The specific absorption rate (SAR) and specific loss power (SLP) obtained from magnetothermal measurements for powder and fluid samples lie in the range 4.4–83 W/g and 19–382 W/g, respectively, showing strong dependence on structural and magnetic properties. The SAR/SLP values as a function of the applied field at 425 kHz display a square dependence on the applied magnetic field below 165 Oe, which is expected for single domain ferromagnetic nanoparticles, but deviate from this at higher values of the applied field. We also obtained the effective anisotropy constant for ball-milled nanoparticles at 1425 rpm for 200, 300, and 500 min. within the framework of linear response theory, showing strong dependence on average crystallite size. Additionally, the toxicity of the prepared nanoparticles in the form of percentage hemolysis was controlled with oleic acid.
10 March 2025 in International Journal of Materials Research
Metal nanoparticles synthesized by the green method show remarkably different properties from bulk materials due to their size, especially in biological applications. The study’s objective is to lessen the adverse effects of synthesis processes, the chemicals they use, and the derivative substances that come from them. One practical approach in green nanotechnology is the use of various biomaterials for the synthesis of nanoparticles. In the present study, chromium nanoparticles were fabricated using Fagonia indica (LEFI) leaf extract as a reducing agent. This technique produced 46 nm-sized nanoparticles that are not only highly stable but also hold promise for a range of applications. The synthesized nanoparticles were characterized by X-ray diffraction spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, dynamic light scattering, Fourier transform infrared spectroscopy, and ultraviolet–visible spectroscopy. An alpha-amylase assay was used to determine the antidiabetic potential of the nanoparticles. The antioxidant activity of plant extract and chromium nanoparticles was evaluated using 2,2-Diphenyl-1-picrylhydrazyl scavenging activity. The agar diffusion method was used to test how well chromium nanoparticles killed Staphylococcus aureus and Escherichia coli. The study’s findings indicate that Cr2O3 nanoparticles have potential as physiologically active agents for bio-medicinal uses, providing reassurance for their future use.
Magnetic hyperthermia-induced ferrite nanoparticles influenced by an external alternating magnetic field (AMF) are actively being pursued as a therapeutic for treating cancer tumor tissue. This work reports a combined experimental and computational study of pristine and Ni-doped cobalt ferrite. Specifically, cobalt ferrite CoFe 2 O 4 nanoparticles doped with nickel ions (Fe 2 Co 1-x Ni x O 4 ) with have been synthesized by in-situ sol-gel protocol to enhance the microstructural and magneto-optical properties. The formulated samples were evaluated using various characterization techniques. XRD measurements established the cubic unit cell of the spinel CoFe 2 O 4 and showed a systematic change in the lattice parameter of CoFe 2 O 4 with Ni doping. The microscopy data from SEM and TEM further confirmed the cubic structures of the synthesized samples. We estimate the optical band gaps E g from the UV-DRS; E g varied between 1.52 and 1.55 eV for the pristine and doped cobalt-ferrite samples. VSM measurements show a decreasing total magnetic moment per formula unit (MM/fu) and a shift towards superparamagnetic as the Ni concentration increases. To further accentuate the properties of the synthesized samples, we used first-principles density functional theory (DFT) calculations to model the various cobalt ferrite compositions. The obtained results from DFT are in good pact with the structural, optical, and magnetic properties as observed in the experiment. An important outcome of our study is the synthesis of cobalt ferrite colloidal nanoparticles with a specific absorbance rate (SAR) in the range 28 - 19 W/g. Such a range of values of SAR makes the samples potential candidates for effective hyperthermia application. Hence, our results demonstrate synthesis protocols and band-engineering routes to enhance the microstructural and magneto-optical properties of cobalt ferrite for magnetic hyperthermia applications.
Magnetic hyperthermia-induced ferrite nanoparticles influenced by an external alternating magnetic field (AMF) are actively being pursued as a therapeutic for treating cancer tumor tissue. This work reports a combined experimental and computational study of pristine and Ni-doped cobalt ferrite. Specifically, cobalt ferrite CoFe 2 O 4 nanoparticles doped with nickel ions (Fe 2 Co 1-x Ni x O 4 ) with have been synthesized by in-situ sol-gel protocol to enhance the microstructural and magneto-optical properties. The formulated samples were evaluated using various characterization techniques. XRD measurements established the cubic unit cell of the spinel CoFe 2 O 4 and showed a systematic change in the lattice parameter of CoFe 2 O 4 with Ni doping. The microscopy data from SEM and TEM further confirmed the cubic structures of the synthesized samples. We estimate the optical band gaps E g from the UV-DRS; E g varied between 1.52 and 1.55 eV for the pristine and doped cobalt-ferrite samples. VSM measurements show a decreasing total magnetic moment per formula unit (MM/fu) and a shift towards superparamagnetic as the Ni concentration increases. To further accentuate the properties of the synthesized samples, we used first-principles density functional theory (DFT) calculations to model the various cobalt ferrite compositions. The obtained results from DFT are in good pact with the structural, optical, and magnetic properties as observed in the experiment. An important outcome of our study is the synthesis of cobalt ferrite colloidal nanoparticles with a specific absorbance rate (SAR) in the range 28 - 19 W/g. Such a range of values of SAR makes the samples potential candidates for effective hyperthermia application. Hence, our results demonstrate synthesis protocols and band-engineering routes to enhance the microstructural and magneto-optical properties of cobalt ferrite for magnetic hyperthermia applications.