Nathalia Diaz Armas

Ms. Nathalia Diaz Armas


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 January 2025 in Biomimetics
Verified
Journal Article
Open access
PDF file
TSTalya Avigal Scheff
Talya Avigal Scheff
Florence AchaFlorence Acha
Florence Acha
Nathalia Diaz ArmasNathalia Diaz Armas
Nathalia Diaz Armas
JMJoey L. Mead
Joey L. Mead
JZJinde Zhang
Jinde Zhang
Superhydrophobic coatings are beneficial for applications like self-cleaning, anti-corrosion, and drag reduction. In this study, we investigated the impact of surface geometry on the static, dynamic, and sliding contact angles in the Cassie–Baxter state. We used fluoro-silane-treated silicon micro-post patterns fabricated via lithography as model surfaces. By varying the solid fraction (ϕs), edge-to-edge spacing (L), and the shape and arrangement of the micro-posts, we examined how these geometric factors influence wetting behavior. Our results show that the solid fraction is the key factor affecting both dynamic and sliding angles, while changes in shape and arrangement had minimal impact. The Cassie–Baxter model accurately predicted receding angles but struggled to predict advancing angles. These insights can guide the development of coatings with enhanced superhydrophobic properties, tailored to achieve higher contact angles and customized for different environmental conditions.

24 March 2024 in Polymers
Verified
Journal Article
Open access
PDF file
STSevil Turkoglu
Sevil Turkoglu
JZJinde Zhang
Jinde Zhang
Hanna DodiukHanna Dodiuk
Hanna Dodiuk
Samuel KenigSamuel Kenig
Samuel Kenig
JRJo Ann Ratto Ross
Jo Ann Ratto Ross
JMJoey L. Mead
Joey L. Mead
In this study, particle loading, polyfluorinated alkyl silanes (PFAS or FAS) content, superhydrophobicity, and crack formation for nanocomposite coatings created by the spray coating process were investigated. The formulations comprised hydrophobic silica, epoxy resin, and fluorine-free or FAS constituents. The effect of FAS content and FAS-free compositions on the silica and epoxy coatings’ chemistry, topography, and wetting properties was also studied. All higher particle loadings (~30 wt.%) showed superhydrophobicity, while lower particle loading formulations did not show superhydrophobic behavior until 13% wt. FAS content. The improved water repellency of coatings with increased FAS (low particle loadings) was attributed to a combination of chemistry and topography as described by the Cassie state. X-ray photoelectron spectroscopy (XPS) spectra showed fluorine enrichment on the coating surface, which increases the intrinsic contact angle. However, increasing the wt.% of FAS in the final coating resulted in severe crack formation for higher particle loadings (~30 wt.%). The results show that fluorine-free and crack-free coatings exhibiting superhydrophobicity can be created.

24 March 2025 in Polymers
Verified
Journal Article
Open access
PDF file
TSTalya Avigal Scheff
Talya Avigal Scheff
Florence AchaFlorence Acha
Florence Acha
Nathalia Diaz ArmasNathalia Diaz Armas
Nathalia Diaz Armas
STSevil Turkoglu
Sevil Turkoglu
JZJinde Zhang
Jinde Zhang
A novel approach for synthesizing polymer particles that encapsulate Fe3O4 nanoparticles using γ-ray irradiated mini-emulsion polymerization is presented. To achieve high encapsulation efficiency, the surface properties of Fe3O4 nanoparticles are modified from hydrophilic to hydrophobic, allowing for effective dispersion in the monomer prior to polymerization. Mini-emulsion techniques have proven essential for forming the encapsulated structure and controlling particle size distribution. γ-ray irradiation initiated radical polymerization and solidified the emulsion structure. Characterization via FTIR, XRD, and TEM confirmed the successful encapsulation of Fe3O4 nanoparticles within polymer particles. Magnetic measurements demonstrated superparamagnetic behavior and high magnetic induction, both of which are properties considered advantageous for biomedical applications.

28 June 2025 in Polymers
Verified
Journal Article
Open access
PDF file
Nathalia Diaz ArmasNathalia Diaz Armas
Nathalia Diaz Armas
GBGeet Bhandari
Geet Bhandari
SKStiven Kodra
Stiven Kodra
JZJinde Zhang
Jinde Zhang
DKDavid Kazmer
David Kazmer
JMJoey L. Mead
Joey L. Mead
This work investigated the 3D printing of fully compounded thermoset elastomers using a custom-designed printer capable of processing both thermoplastics and elastomers containing fillers and specific cure packages. The adhesion strength between selected thermoset elastomers and thermoplastic combinations was studied, and the influence of key process parameters on adhesion was evaluated. The results showed that interfacial bonding was favored by the proximity of solubility parameters, the amorphous morphology of the thermoplastic, and increased chain mobility at the processing temperature. Rubber processing parameters significantly influenced adhesion, showing that curing at a lower temperature for a longer duration yielded better results than shorter, higher-temperature cures. Elemental analysis revealed the presence of rubber-specific components on the thermoplastic surface, suggesting interfacial migration. These findings contribute to advancing multi-material 3D printing by enabling the integration of rubber-like materials with thermoplastics, expanding opportunities for applications in high-temperature and chemically demanding environments.

9 January 2025 in Materials
Verified
Journal Article
Open access
PDF file
Florence AchaFlorence Acha
Florence Acha
TSTalya Avigal Scheff
Talya Avigal Scheff
Nathalia Diaz ArmasNathalia Diaz Armas
Nathalia Diaz Armas
JMJoey L. Mead
Joey L. Mead
SJStephen P. Johnston
Stephen P. Johnston
JZJinde Zhang
Jinde Zhang
Epoxy nanocomposites are widely used in various applications because of their excellent properties. Different types of manufacturing techniques are used to produce epoxy composites based on various fillers, molecular weight, and applications required. The physical properties and chemical structure of epoxy resin help in determining the method for its manufacturing. Coatings and adhesive formulations are prepared using high- molecular-weight epoxies, whereas epoxy nanocomposites require low-molecular-weight epoxies due to ease of manufacturing. A low-molecular-weight epoxy can provide high crosslink density to the epoxy but may also cause inherent brittleness in epoxy nanocomposites. Further, the addition of CNTs may also cause more brittleness in the final product. In this work, the authors have developed a method to process composites based on high-molecular-weight epoxy reinforced with high loading of CNTs (15 wt.%). The high molecular weight will bring lots of challenges during manufacturing. In this paper, a novel manufacturing technique based on separate molding and curing conditions to produce highly concentrated CNT-filled epoxy with high-molecular-weight epoxy resin is described, achieving excellent mechanical properties, good toughness, and high electrical conductivity in an efficient, low-cost, environmentally friendly, and high-volume way. The findings demonstrated improvements in these mechanical properties compared to conventional systems. They also highlight the potential of the novel method to develop advanced composite materials which can revolutionize industrial sectors such as aerospace, automotives, and electronics where structural integrity and thermal stability are important.

13 June 2026 in Surfaces
Verified
Journal Article
Open access
PDF file
Florence AchaFlorence Acha
Florence Acha
STSevil Turkoglu
Sevil Turkoglu
Nathalia Diaz ArmasNathalia Diaz Armas
Nathalia Diaz Armas
Hanna DodiukHanna Dodiuk
Hanna Dodiuk
Samuel KenigSamuel Kenig
Samuel Kenig
JMJoey L. Mead
Joey L. Mead
This study investigates the influence of PFAS-free superhydrophobic treatment on the performance of NYCO (50% Nylon 50% Cotton) fabric. The primary focus is to assess how these treatments influence key performance attributes, including water repellency, weight gain, air permeability, and color stability. The treatments were formulated using a silica/epoxy diluted with isopropanol (IPA), with the goal of achieving minimal weight gain (<10%) and high water repellency (AATCC22 rating of 80 or above) with a minimal impact on breathability and visual appearance. A series of formulations were prepared with a a constant silica to epoxy ratio (3:7) while varying the solids content of the suspension (1.8 to 5.2 wt.%). Treated fabrics were evaluated through water spray tests (AATCC TM 22), air permeability (ASTM D737), spectrophotometric color analysis, and SEM surface morphology. Samples treated with a formulation containing 2.0 wt.% solids content demonstrated the best performance characteristics: low weight gain, minimal breathability reduction, low color change, and water repellency. The findings reveal the potential for a PFAS-free treatment to achieve high water repellency while maintaining other key fabric performance characteristics. The results contribute to the advancement of sustainable, high-performance protective textiles for military applications.