Stiven Kodra

Mr. Stiven Kodra

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 June 2025 in Polymers
Verified
Journal Article
Open access
PDF file
Nathalia Diaz ArmasNathalia Diaz Armas
Nathalia Diaz Armas
GBGeet Bhandari
Geet Bhandari
SKStiven Kodra
Stiven Kodra
JZJinde Zhang
Jinde Zhang
DKDavid Kazmer
David Kazmer
JMJoey L. Mead
Joey L. Mead
This work investigated the 3D printing of fully compounded thermoset elastomers using a custom-designed printer capable of processing both thermoplastics and elastomers containing fillers and specific cure packages. The adhesion strength between selected thermoset elastomers and thermoplastic combinations was studied, and the influence of key process parameters on adhesion was evaluated. The results showed that interfacial bonding was favored by the proximity of solubility parameters, the amorphous morphology of the thermoplastic, and increased chain mobility at the processing temperature. Rubber processing parameters significantly influenced adhesion, showing that curing at a lower temperature for a longer duration yielded better results than shorter, higher-temperature cures. Elemental analysis revealed the presence of rubber-specific components on the thermoplastic surface, suggesting interfacial migration. These findings contribute to advancing multi-material 3D printing by enabling the integration of rubber-like materials with thermoplastics, expanding opportunities for applications in high-temperature and chemically demanding environments.

2 March 2026 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
SKStiven Kodra
Stiven Kodra
WDWill Drakas
Will Drakas
MMMitchell Mashburn
Mitchell Mashburn
PFPatrick Ferrell
Patrick Ferrell
DKDavid O. Kazmer
David O. Kazmer
This study presents the pilot-scale implementation of a compact extruder designed to process post-consumer recycled plastics using chaotic mixing theories. The system features a novel mixing screw with an exceptionally short 8:1 length-to-diameter ratio and counter-rotating mixing slots cut into double flights of variable pitch. These features induce chaotic advection to enhance dispersive and distributive mixing by disrupting solid bed formation, improving thermal and compositional homogeneity in the extrudate through the baker’s transformation. A model-based screw design methodology using non-isothermal, non-Newtonian computational fluid dynamic (CFD) simulations was developed to optimize geometry for energy efficiency and throughput. Significant experimental validation employed a custom-built extruder with a 31 mm screw and an instrumented nozzle equipped with melt pressure and temperature sensors. Throughput and melt temperature were characterized as functions of screw speed, barrel temperature, nozzle geometry, and extruder orientation. Multiple regression models for simulated and experimental data showed high fidelity (R² ≈ 0.99) and strong correlation (r ≈ 0.95). Discrepancies in mass output were attributed to lower packing density of pelletized feedstock relative to the continuum assumption in simulations. The extruder demonstrated near-linear control of melt temperature (1.1 °C per unit setpoint) and mass flow rate (0.84 g min⁻¹ per RPM) with minimal cross-effects. A specific energy consumption of 0.254 kWh kg⁻¹ at 200 °C and 60 RPM corresponded to 76% efficiency, representing a 26% improvement over a previous design. The system offers reduced energy use, short residence times, and enhanced processing of recycled and bio-based polymers, advancing sustainable manufacturing in polymer processing and additive manufacturing.

23 February 2026 in Polymers
Verified
Journal Article
Open access
PDF file
AMAA Mubasshir
AA Mubasshir
SKStiven Kodra
Stiven Kodra
CSChandramouli Sangeetham
Chandramouli Sangeetham
DKDavid Kazmer
David Kazmer
JMJoey L. Mead
Joey L. Mead
While the effects of formulation variables of a rubber compound are well established for conventional rubber manufacturing techniques, their role in extrusion-based additive manufacturing remains underexplored. This study explores the impact of different base rubbers (NBR and EPDM) and curing agents (sulfur and peroxide) on processability and final part characteristics in material extrusion additive manufacturing applications. Under identical printing conditions, sulfur-cured NBR exhibits greater post-print shrinkage (12%) than sulfur-cured EPDM (7%). However, sulfur-cured NBR achieves a higher degree of adhesion between printed layers than sulfur-cured EPDM, as suggested by the % retention of the bulk materials’ ultimate stress by the printed parts (84–100% and 51–62%, respectively). Additionally, a peroxide-cured NBR formulation was compared against the same sulfur-cured NBR formulation. Printed parts from the peroxide-cured NBR formulation showed higher shrinkage (16%) and lower % retention of the bulk materials’ ultimate stress (26–33%) than the sulfur-cured NBR formulation. Additionally, the tensile behavior of all three rubber compounds was found to be strongly dependent on printing orientation, showing the anisotropic behavior typical of extrusion-based additive manufacturing. Sulfur-cured NBR showed the least anisotropy for stress at break (0.82) and strain at break (0.90), whereas peroxide-cured NBR showed the highest anisotropy in stress (0.74) and strain (0.82). The anisotropy ratios for sulfur-cured NBR and EPDM compounds were very similar for stress (0.82 vs. 0.82) and comparable for strain (0.90 vs. 0.87). Notably, the peroxide cure system provided almost twice as much available printing time as the sulfur cure system. This report on the effects of base rubber and curing agents on 3D printability and part properties provides a background to guide future efforts to design rubber compounds for 3D printing applications.

Verified
Journal Article
Open access
PDF file
SKStiven Kodra
Stiven Kodra
DKDavid Kazmer
David Kazmer
MMMitchell Mashburn
Mitchell Mashburn
EGEric Thomas Gohl
Eric Thomas Gohl
PFPatrick Ferrell
Patrick Ferrell
Transient extrusion defects are a fundamental process control challenge in fused granular fabrication (FGF), arising from the finite melt pressurization time of screw-driven extruders at each start–stop event. This study presents an integrated experimental and analytical framework for the characterization and open-loop feedforward compensation of these transient dynamics, demonstrated on two composite thermoplastic feedstocks: a recycled random polypropylene (RPP1) and a 20 wt% wood-fiber-reinforced polypropylene composite (WFPP). Unlike prior filament- or single-material feedforward strategies, this framework derives and statistically validates material-specific compensation parameters across two rheologically distinct feedstocks. Single-layer road experiments were conducted on a custom instrumented FGF platform across a 23−1 half-fraction factorial design varying melt temperature, print acceleration, and nozzle diameter, with screw speed stepped among 20, 40, and 80 RPM to excite transient states; deposited road geometry was digitized and spatially registered to the synchronized process signals. Main-effects regression confirmed that nozzle diameter is the dominant predictor of mean road width, while screw velocity exerts a significant negative effect attributable to speed-dependent backflow. Prediction-error minimization on the pooled multi-experiment dataset yielded a parsimonious first-order transfer function, G(s) = 0.990/(1 + 1.909s), whose time constant is physically attributed to melt compressibility in the barrel volume upstream of the nozzle restriction. This model was embedded in a G-code post-processor implementing two sequential corrections: a material-specific steady-state slip gain and a discrete linear-advance term parameterized by the identified time constant. For RPP1 at the nominal gain, the print latency interquartile range decreased from 5–20 mm to 2–8 mm without degrading steady-state dimensional accuracy; the combination of nominal gain with active retraction further reduced latency to near-zero. Analysis of covariance (ANCOVA) confirmed that optimal feedforward gains are statistically material-dependent across all three quality metrics (p < 0.05), providing statistical justification for material-specific compensator parameterization. The results establish a practical, hardware-agnostic route to reduce transient deposition defects in pellet-based additive manufacturing, extensible to additional feedstocks.