Electro-Spun nanofibers (ESNs), with their design flexibility, tailorable morphologies, and high surface area, are well-favored as triboelectric nanogenerator (TENG) materials for wearable electronics. Here, various aspects of ESNs-based wearable TENGs were examined. After introducing the most common TENG operating modes, an insightful overview of wearable TENG applications based on ESNs was presented. In this survey, a special attention is paid to wearable sensing, human-machine interaction, self-powered devices, and amplified energy harvesting. Efforts towards improving energy conversion efficiency, material durability, and compatibility with diverse wearable platforms were visited. Finally, a perspective based on particularly material aspect of ESNs is given, which could be insightful in tackling prevailing challenges and giving birth to new directions.
In recent years, many research groups have synthesized ultra-thin silver nanowires (AgNWs) with diameters below 30 nm by employing Cl− and Br− simultaneously in the polyol process. However, the yield of AgNWs in this method was low, due to the production of Ag nanoparticles (AgNPs) as an unwanted byproduct, especially in the case of high Br− concentration. Here, we investigated the roles of Cl− and Br− in the preparation of AgNWs and then synthesized high aspect ratio (up to 2100) AgNWs in high yield (>85% AgNWs) using a Cl− and Br− co-mediated method. We found that multiply-twinned particles (MTPs) with different critical sizes were formed and grew into AgNWs, accompanied by a small and large amount of AgNPs for the NaCl and NaBr additives, respectively. For the first time, we propose that the growth of AgNWs of different diameters and yields can be understood based on the electron trap distribution (ETD) of the silver halide crystals. For the case of Cl− and Br− co-additives, a mixed silver halide crystal of AgBr1−xClx was formed, rather than the AgBr/AgCl mixture reported previously. In this type of crystal, the ETD is uniform, which is beneficial for the synthesis of AgNWs with small diameter (30~40 nm) and high aspect ratio. AgNW transparent electrodes were prepared in air by rod coating. A sheet resistance of 48 Ω/sq and transmittance of 95% at 550 nm were obtained without any post-treatment.
Multiple quantum-wells light-emitting diodes (MQWs-LEDs) are high-performance electroluminescent light sources, which is widely used in solid state lighting, medical, industrial and other fields. Understanding the light emission origin and mechanisms of MQWs-LEDs is crucial for their practical applications. Here, we show the excellent ultraviolet (UV) and deep-ultraviolet (DUV) emissions from ZnO/AlGaN MQWs-LEDs using Technology Computer Aided Design (TCAD) simulation, which deviates from the typical ZnO heterojunction LEDs. The adjustment of the structural parameters of the MQWs was performed to control the emission wavelength in the range of 335–366 nm. After parameter optimization, 342.6–348.7 nm DUV EL from ZnO/AlGaN MQWs is obtained successfully. The deconvolution analysis of the EL spectra was conducted to investigate the origin of the emissions. The results indicate that the structural parameter operation-induced emission blue-shift results from the quantum confinement effect. This work provides new references for designing ZnO-based MQWs and preparing new DUV LEDs.