The Keggin type 12-tungstoboric acid (H5BW12O40) was prepared. Aniline was oxidized in an aqueous solution of H5BW12O40 to synthesize a series of polyanilines doped with the 12-tungstoboric acid (PANI-[H5BW12O40]), using ammonium persulfate as an oxidant. The effects of the initial weight ratio x (x ) of H5BW12O40 to aniline on the properties of PANI-[H5BW12O40] were investigated by FTIR, UV-vis, XRD, and conductivity measurement. The results showed that PANI in PANI-[H5BW12O40] was in the emeraldine salt state, and the 12-tungstoboric anions were incorporated into the chains of PANI more and more with increasing values of x. The oxidation degree of PANI in PANI-[H5BW12O40] was strongly dependent on x. As the weight ratio x reached 0.040, the oxidation degree of PANI in PANI-[H5BW12O40] increased obviously. The reason that electrical conductivity of PANI-[H5BW12O40] decreased sharply at x was attributed to the increase of the oxidation degree resulted by the excess of H5BW12O40 used in the preparation.
7 June 2012 in Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry
Polypyrrole (PPy) nanoparticles formed by chemical in situ polymerization were deposited on the hydrophilic/hydrophobic surface of SiO2 substrates to give the diversely morphology, respectively. The morphologies of PPy nanoparticles deposit were investigated using optical microscope, scanning electron microscope (SEM), and atomic force microscope (AFM) imaging techniques. The morphology of Y- and T-shape wrinkles was observed on the hydrophilic surface of SiO2 substrate, while the morphology of polygon-shape wrinkles on the hydrophobic surface of SiO2 substrate, and this distinction is due to the difference of the surface energy between the hydrophilic and hydrophobic surface of SiO2 substrate and so-called “memory effect.”
Triboelectric nanogenerators (TENGs), as an emerging energy harvesting device, can efficiently convert the weak mechanical energy in the environment into electrical energy, demonstrating significant potential in self-powered systems. In this study, polyvinylidene fluoride (PVDF) nanofiber films mixed with a small amount of n-propyl gallate (PG) were prepared by using the electrospinning technique, and TENGs were fabricated based on these films. Unexpectedly, experimental results showed that PG (with 0.5–2.5 wt%) did not affect the β phase of the PVDF. However, the TENG based on PVDF/PG composite nanofiber film with 1 wt% PG (PG1-TENG) exhibited large output values of 334 V, 4.36 μA, and 78.4 nC for output voltage, current, and transferred charge, respectively, with a power density of 5.27 W/m2, which highlights ~60% improvement in output voltage over pristine PVDF-TENG. This observation was attributed to the unique charge regulation ability of PG, without altering PVDF’s β phase. Furthermore, application potential of PG1-TENG was demonstrated by powering up an LCD calculator and 480 LEDs.