The diesel particulate filter (DPF) is among the most effective measures for controlling particulate emissions from diesel vehicles. Therefore, resource-efficient DPF design and operation are critical to sustainable deployment. In practical engineering, the pursuit of high filtration efficiency inevitably leads to excessively high pressure drop, which in turn impairs the fuel economy and operational reliability of the engine. To address this pair of conflicting objectives, this study introduces a hybrid GRA-MLR-WOA approach, with the initial filtration efficiency and pressure drop at an 80 g soot capture amount as the optimization objectives, to optimize the structural parameters of the DPF. Firstly, based on a computational fluid dynamics (CFD) model and orthogonal experimental design, combined with grey relational analysis (GRA), the effects of key structural parameters on filtration efficiency and pressure drop were evaluated. Secondly, Box–Behnken Design (BBD) was integrated with multiple linear regression (MLR) to establish mathematical regression models describing the relationships between structural parameters, filtration efficiency, and pressure drop. Finally, the whale optimization algorithm (WOA) was employed to obtain the Pareto frontier of the regression models. Through screening with the goal of maximizing initial filtration efficiency, the optimized DPF achieved a 46.85% increase in initial filtration efficiency and a 34.88% reduction in pressure drop compared to the original model. This study targets sustainable filtration design and proposes an optimization framework that jointly optimizes pressure drop and the initial filtration efficiency. The results provide a robust empirical basis for engineering practice and demonstrate strong reproducibility.
The selective catalytic reduction (SCR) system is a key component for addressing NOx emissions from internal combustion engines. To resolve the issues of modeling distortion in SCR systems and the difficulty in characterizing the local reaction mechanism, a multi-dimensional SCR reaction model based on the coupling of Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) dual mechanisms was established and conducted by experiment. The SCR catalytic characteristics and the dual-mechanism reaction process were systematically investigated. Additionally, based on the combined analysis of species concentration distribution coupled with temperature characteristics, a calculation method for the synergy of concentration-temperature fields was developed, and the synergistic characteristics of the concentration-temperature fields were explored. The results showed that high load accelerated the light-off speed, but this effect was counteracted by the negative impact of high flow rate. A strong negative correlation was maintained between temperature and NOx concentration across the full load range, and the axial consistency increased with load increasing. The results provide important theoretical support for the mechanism analysis of diesel engine SCR reactions and the optimization of thermal management.
In visible light communication (VLC) systems, lenses are typically used to collimate light at the transmitter. However, due to the wide light emission angle of mini-LEDs, capturing light at large angles using a lens at the transmitter can be challenging. This paper presents a design of a reflective cup at the mini-LED-based VLC transmitter. The redesigned reflective cup can collect most of the light and collimate it, achieving an efficiency of approximately 86% at a distance of 10 m in the simulation. In the experiment, error-free communication was achieved at a distance of 100 m with a data rate of 190 Mbps. To the best of our knowledge, a long-distance VLC system based on mini-LEDs is investigated for the first time. The reflective cup offers advantages, including high efficiency, low cost, and a simple structure. It holds reference value for addressing the issue of limited communication distance in underwater wireless optical communication (UWOC).