The powersphere is a spherical enclosed receiver composed of multiple photovoltaic cells. It serves as a replacement for traditional photovoltaic panels in laser wireless power transmission systems for optoelectronic conversion. The ideal powersphere aims to achieve a uniform distribution of light within the cavity through infinite reflections, reducing energy losses in the circuit. However, due to the high absorption rate of the photovoltaic cells, the direct irradiation area on the inner surface of the powersphere exhibits a significantly higher light intensity than the reflected area, resulting in a suboptimal level of light uniformity and certain circuit losses. To address the aforementioned issues, a method of intra-cavity beam splitting in the powersphere is proposed. This solution aims to increase the area of direct illumination and reduce the intensity difference between direct and reflected lights, thereby improving the light uniformity on the inner surface of the powersphere. Utilizing the transformation matrix of Gaussian beams, the q parameters for each optical path with beam splitting were calculated, and the equality of corresponding q values was demonstrated. Further, based on the q parameter expression for the electric field of Gaussian beams, the intensities for each optical path were calculated, and it was demonstrated that their values are equal. Additionally, an optical software was utilized to establish a model for intra-cavity beam splitting in the powersphere. Based on this model, a beam-splitting system was designed using a semi-transparent and semi-reflective lens as the core component. The light uniformity performance of the proposed system was analyzed through simulations. To further validate the effectiveness of the calculations, design, and simulations, multiple lenses were employed to construct the beam-splitting system. An experimental platform was set up, consisting of a semiconductor laser, monocrystalline silicon photovoltaic cells, beam expander, Fresnel lens, beam-splitting system, and powersphere. An experimental verification was conducted, and the results aligned with the theoretical calculations and simulated outcomes. The above theory, simulations, and experiments demonstrate that the intra-cavity beam-splitting method effectively enhances the optical uniformity within the powersphere.

In laser wireless power transmission systems, the powersphere serves as a spherical enclosed receiver that performs photoelectric conversion, achieving uniform light distribution within the cavity through infinite internal light reflection. However, in practical applications, the high level of light absorption displayed by photovoltaic cells leads to significant disparities in light intensity between directly irradiated regions and reflected regions on the inner surface of the powersphere, resulting in poor light uniformity. One approach aimed at addressing this issue uses a spectroscope to split the incident beam into multiple paths, allowing the direct illumination of all inner surfaces of the powersphere and reducing the light intensity difference between direct and reflected regions. However, experimental results indicate that light transmission through lenses introduces power losses, leading to improved uniformity but reduced output power. To address this limitation, this study proposes a method that utilizes multiple incident laser beams combined with a centrally positioned spherical reflector within the powersphere. A wireless power transmission system model was developed using optical simulation software, and the uniformity of the intracavity light field in the system was analyzed through simulation. To validate the design and simulation accuracy, an experimental system incorporating semiconductor lasers, spherical mirrors, and a powersphere was constructed. The data from the experiments aligned with the simulation results, jointly confirming that integrating a spherical reflector and distributed incident lasers enhances the uniformity of the internal light field within the powersphere and improves the system’s efficiency.

In visible light communication (VLC) systems, lenses are typically used to collimate light at the transmitter. However, due to the wide light emission angle of mini-LEDs, capturing light at large angles using a lens at the transmitter can be challenging. This paper presents a design of a reflective cup at the mini-LED-based VLC transmitter. The redesigned reflective cup can collect most of the light and collimate it, achieving an efficiency of approximately 86% at a distance of 10 m in the simulation. In the experiment, error-free communication was achieved at a distance of 100 m with a data rate of 190 Mbps. To the best of our knowledge, a long-distance VLC system based on mini-LEDs is investigated for the first time. The reflective cup offers advantages, including high efficiency, low cost, and a simple structure. It holds reference value for addressing the issue of limited communication distance in underwater wireless optical communication (UWOC).

This paper presents a rapid approach for the dynamic separation of radial polarization (R-pol) and azimuthal polarization (A-pol) components in circular Airy vortex beams (CAVBs) by utilizing the linear electro-optic (EO) effect in uniaxial crystals. By applying an external electric field along the z-axis of a strontium barium niobate (SBN) crystal, tunable spatial separation of the R-pol and A-pol components is achieved. Under positive electric fields, the crystal maintains negative uniaxial properties with increased birefringence, extending the focal separation distance. Conversely, negative electric fields initially reduce the birefringence of the crystal; further increases in negative field strength will transition the crystal to a positive uniaxial state, subsequently enhancing birefringence and restoring focal separation. Experimental simulations demonstrate a focal separation of 1.4 mm at ±15 kV/mm, with R-pol focusing first at +15 kV/mm and A-pol preceding at −15 kV/mm. The polarization distributions at the foci confirm the successful separation of the two components. This approach overcomes the static limitation of conventional polarization splitters in separating R-pol and A-pol components, showing significant potential for optical manipulation, high-resolution imaging, and quantum information processing.