The Variable Buoyancy System (VBS) is a critical device in the operation of underwater gliders that should be properly sized to achieve the required vehicle propulsion; safety within the operating range; and adequate efficiency at the nominal depth rating. The VBS budget volume depends mainly on the glider hydrodynamics and the main operating states of the vehicle. A method is proposed with analytical equations to analyze the performance of underwater gliders and to estimate the resultant velocities of the vehicle as a function of the buoyancy change and the glider angle. The method is validated to analyze the glider performance of underwater gliders and is essential to get the main design requirement for the propulsion system: the VBS budget volume. The paper presents the application of the method to obtain the VBS sizing for an academic glider; a comparison with the historical hydrodynamic data of the Slocum glider; the results of the glider performance study; and the development of the characteristic charts necessary to evaluate the performance of the vehicle and its flight parameters.
A hydrodynamic analysis is performed for a glider designed in the Center for Engineering and Industrial Development (CIDESI). The CIDESI glider configuration is proposed as an in-house design pretending to be a low cost submarine vehicle for monitoring and collecting data in remote locations of the Mexican seabed. The main goal of the present study is to compute the hydrodynamic forces and moments exerted on the glider at different motion conditions. The analysis is carried out through the implementation of computational fluid dynamics simulations. Steady state simulations were implemented using a RANS turbulence model with wall functions to capture the boundary layer effects with a coarse grid. The hydrodynamic curves for the force and moment components are presented and the coefficients were computed. As a part of the integral project for the results obtained for this study will be incorporated into a dynamic model of the glider in order to simulate its motion and eventually design the required control strategies for the different operating scenarios during its mission.
In this work is presented part of the advances in the development of a coastal underwater glider in Mexico by CIDESI, where is shown the design and modelling of the propulsion system, that consist in a variable buoyancy system type piston tank. The main goal of this work is define the main parameters of design that should be taken in account to design a variable buoyancy system and how them are related with the performance of the vehicle and power consumption.
In the present work is described the development and features of a Core Sampling Skid for a ROV Lynx 1117 (Observation class), using compatible systems with several ROVs that could represent an alternative to modify Observation class ROVs to take sediment cores in the seabed with a reduced cost respect the ROV Work Class platforms. The Skid consist in a hydraulic systems controlled by a telemetry system that modify the position of a manipulator arm and the container of the cores samples trough a joystick, to enable and disable the respective degrees of freedom.